Description

Cub Cadet 2284 Parts Catalog – 93 Pages of Factory Part Numbers

Cub Cadet 2284 Parts Catalog – if you own a 2284 garden tractor, you already know that ordering the wrong air filter element or intake gasket turns a half-hour job into a week of waiting and a second shipping charge. I’ve been turning wrenches for 28 years, and I can tell you that the fastest way to get the right part is to stop guessing. This is the factory parts catalog – 93 pages of exploded views, part numbers, and serial number splits directly from Cub Cadet. No aftermarket guesswork. No reprints of reprints. Just the numbers the assembly line used.

Air Intake/Filtration: Illustrated Parts List (Pages 1-2)

The catalog opens with a clean exploded diagram of the air intake system. You get the intake manifold (part number KH-24-164-14), the gasket set (KH-24-041-01 and KH-24-041-06), and the inner air cleaner cover assembly. Every screw, nut, and seal is listed with the exact quantity. Need the wing nut for the cover? It’s KH-12-100-01. The page also shows the horsepower decal location – something aftermarket catalogs often skip. If your 2284 has a blocked air cleaner base, the part number is KH-24-094-03, and it’s marked as serviceable (S) on page 1. That means you can order it individually without buying the whole box.

Battery And Electrical Components: Serial Number Splits (Pages 3-4)

This section covers the battery tray, cables, relays, fuses, and the main wire harness. Pay attention: the catalog shows two different wire harnesses depending on your serial number. Below serial 880,000 you use harness 725-3248; above that it’s 629-3024. The voltage indicator and voltage sensor module also change at that break. If you order the wrong harness because you used a generic parts list, you’ll be chasing electrical gremlins for days. The catalog includes the OEM part numbers for the 20-amp fuse (725-1381), the diode assembly (759-3675), and even the little fuse holder clip (729-0209). Every fastener gets a size and grade – screw M8-1.25 x 14 mm, hex nut GR8.8.

Battery Tray And Bulkhead: Structural Parts (Page 5)

Page 5 lays out the battery tray and bulkhead mounting with reference numbers 1 through 17. The hold-down bracket (703-1823), tray (731-3105), and vent tube (759-3654) are all here. If you’ve ever had a battery shift and short against the frame, you know why the correct tray and hold-down matter. The catalog shows the exact washer and screw for the positive cable terminal – 5/16-18 x 1.38-inch cap screw (710-3083). No guessing whether it’s metric or standard.

3 Reasons OEM Parts Catalogs Beat Aftermarket Lists

First, OEM catalogs like this one are drawn from the factory engineering drawings. Aftermarket parts catalogs often trace third-party copies, which accumulate errors – wrong quantities, swapped reference numbers, missing hardware. Second, this catalog includes the “S/P/F” code – serviceable, part, or finish – so you know if the dealer stocks that part or it’s a special-order assembly. Third, serial number breaks are printed on every page header. Your 2284 may have a different voltage regulator than your neighbor’s if it was built after 880,000. The catalog calls that out plainly. I’ve seen too many DIY guys order the wrong starter relay because they didn’t check the split. Don’t be that guy.

How to Use This Catalog with Your Serial Number

Before you open the file, write down your 2284’s serial number. It’s stamped on the frame near the left rear axle. The catalog covers S/N 864,501 through 899,000. If your tractor falls outside that range, you need the earlier or later edition – check our related manuals below. Inside, each section header repeats the serial range. When you look up a part, find the exploded view, note the reference number, then cross it to the table. That table gives the part number, description, and quantity. Use that number when you call or order online. The automotive industry runs on precision part numbers – see the Automotive Industry Overview for why that matters. And if you’re working on multiple models, you may want the Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs for the smaller chassis, or the Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns for a larger frame. For older units, the Cub Cadet 81, 21121C290248 Parts Catalog – OEM Factory Breakdown covers compact tractors.

Source Validity: Genuine OEM Document from Cub Cadet

This is not a photocopy or a third-party compilation. The file originates from Cub Cadet’s official parts distribution network – you can see the discount parts phone number from the original vendor on every page. The formatting matches factory service literature: crisp line drawings, consistent font, and part numbers that trace back to Kohler and Cub Cadet inventories. Aftermarket catalogs often rearrange pages or omit the fastener callouts. This one gives you every screw size, washer type, and torque specification where applicable. It’s the same document the dealership counter guys pull up when you walk in with a broken part.

Does This Catalog Replace a Service Manual?

Short answer: No. This is a parts catalog, not a repair manual. It tells you what part to order, not how to install it. You’ll still want a factory service manual for torque sequences and R&R procedures. But without the correct part number, the service manual is useless. I’ve seen guys buy a $200 service manual and then order the wrong head gasket because they didn’t have the parts breakdown. This catalog fills that gap.

Q: Do I need a separate service manual if I have this parts catalog?

Yes. The parts catalog shows you what goes where and which part number to order, but it does not include removal/installation steps or torque specs. For that, you need the factory service manual.

Q: What if my Cub Cadet 2284 serial number is outside 864,501–899,000?

This catalog only applies to that range. If your tractor is older or newer, you need the matching edition for its serial block. Call a Cub Cadet dealer with your S/N to get the exact catalog. We may stock other ranges – check our related manuals or email us your serial number.

The fastest way to stop wasting time on wrong parts is to carry the factory reference on your phone or bench. Access the Factory Manual today and keep the right part numbers within arm’s reach.