Description

Cub Cadet 1610 Parts Catalog

If you have ever ordered a part for a Cub Cadet 1610 and got the wrong one because you guessed the number off a worn‑out sticker, this Parts Catalog is for you. I have seen too many guys slap a generic fuel filter on a 1610 and then spend half a Saturday chasing an air leak. That stops here. This is a factory OEM document – 75 pages of exploded diagrams with real part numbers, not cross‑reference guesses. Page 2 shows the air cleaner assembly: knob BS‑212706, cover BS‑223002, element BS‑271271. No aftermarket part number conversion needed. You get the factory number, you order that number, it fits. That is the point.

Cub Cadet 1610 Parts Catalog: 75 Pages of Factory Data

Every page carries the same dense layout: an exploded view on the left side, a table on the right with ref numbers, part numbers, quantities, and descriptions. Page 4 covers the baffle assembly – engine heat baffle (703‑1160), muffler baffle (703‑1168), and the Belleville washer (736‑0105). The table also flags superseded parts with S/P/F codes. If a part is superseded, the catalog tells you which number replaces it. You do not have to dig through dealer lookup screens.

Air Cleaner Page: Exploded View and Part Numbers

Take the air cleaner section (pages 1–2). Ref #6 is the element – BS‑271271. Ref #11 is the cartridge – BS‑394019. If you need the mounting strap (ref #9, BS‑394546), the catalog says it includes ref #10 screw. No second guessing. The diagram is drawn to scale relative to the assembly. You can see exactly how the cartridge plate (ref #5, BS‑222859) sits under the cover. This eliminates the “I think it goes this way” moment that leads to bent tabs.

Baffle Assembly: Why OEM Part Numbers Matter

Aftermarket cross‑references often merge two separate baffles into one “universal” piece. The Cub Cadet 1610 uses an engine heat baffle (703‑1160) AND a muffler baffle (703‑1168) with a separate seal (723‑3046). Page 4 shows both with their hardware – bolt 710‑0514 (3/8 x 1, grade 5) and Belleville washer 736‑0105. If you order a generic baffle kit, you will be missing the seal or the correct fastener. That seal leaks, the engine bay gets dirty, and you are cleaning debris out of the cooling fins. Use the factory part numbers and it all bolts up the way the engineers intended.

Does This Parts Catalog Cover the Battery Mounting?

Yes. Page 5 shows the battery and mounting assembly – battery tray, hold‑down, hardware. The diagram includes the orientation of the posts and the cable routing slots. The part numbers are listed directly below the illustration. No need to call the dealer and read a faded serial number.

3 Reasons to Use Factory Parts Catalogs Over Aftermarket

First, the part numbers are 100% traceable back to Cub Cadet’s engineering drawings. Second, supersession history is included – the S/P/F column tells you if a part is stocked, pending, or filled. Third, the diagrams are assembly‑specific. You see every single bolt, grommet, and seal in the exact position. A third‑party catalog might skip the belleville washer because “it’s just a flat washer.” On the 1610 that washer provides the correct clamp load for the baffle. Not the same.

That level of accuracy comes from the original manufacturer. The automotive industry builds machines with hundreds of fasteners at specific torque values. A parts catalog that lacks this detail will cost you time and money. For a deeper look at why OEM documentation matters, see the Automotive Industry Overview.

Get the Right Part Before You Start the Job

Flip to the battery page (page 5) if you are replacing the battery tray. Find the exact hold‑down hardware. Write down the numbers. Order them. Then pull the old tray. If you wait until the battery is out and the bolts are snapped, you lose momentum. This catalog keeps you ahead.

The whole book is 75 pages. Each page covers a separate assembly – air cleaner, baffle, battery, steering, wheels, engine, transmission, deck. Every part number is the factory number. This is not a re‑typed list from a forum. It is scanned from the original Cub Cadet print.

If you are working on other models, check these related manuals:

• Cub Cadet 21121C29025 Parts Catalog – 73 Pages of Factory Specs
• Cub Cadet 984 Parts Catalog – 128 Pages of OEM Factory Parts Breakdowns
• Cub Cadet 81, 21121C290248 Parts Catalog – OEM Factory Breakdown

Accuracy in the automotive world starts with the right part number. The Automotive Industry Overview reinforces that. For your Cub Cadet 1610, stop guessing. Access the Factory Manual.

Frequently Asked Questions

Is this the same as a service manual?

No. This is a parts catalog. It lists part numbers and exploded diagrams. A service manual would include repair procedures and torque specs. You need both for a complete shop reference.

Can I use this to find parts for a 1610 with a different engine?

No. Each diagram corresponds to the original factory configuration.

How are the diagrams organized?

Each assembly has its own page spread. The exploded view shows every component in its relative position. The table below lists the part number, description, quantity, and supersession code. You read the diagram left to right, find the ref number, then look it up in the table.

Does the catalog include pricing?

No. Pricing changes constantly. The purpose of this catalog is to identify the exact part number so you can order it from a dealer or online. The manual lists part numbers, descriptions, and quantities per assembly. For example, the air cleaner assembly on page 2 shows the cartridge plate (BS-222859) and the element (BS-271271) with separate part numbers. You still need to check current prices from your supplier. But you will not order the wrong part.