Description

Caterpillar Track-Type Tractors, Motor Graders, Skid Steer Loaders, MULTI TERRAIN LOADERS, COMPACT TRACK LOADERS 2011 Technical Manual

You’ve got a D6T on a slope and you’re guessing the blade capacity? Or you’re sizing a ripper for a 980M using internet forum numbers? That’s how stuff breaks and jobs go sideways. The Caterpillar Track-Type Tractors, Motor Graders, Skid Steer Loaders, MULTI TERRAIN LOADERS, COMPACT TRACK LOADERS 2011 Technical Manual (Performance Handbook Edition 41) is the factory’s own reference – 1474 pages of verified specifications, production estimating curves, and safety regulations. This isn’t a third-party rewrite. It’s the same document the dealer’s sales engineer uses.

1474 Pages of Factory-Approved Data

Page 1 of the handbook opens with a table of contents listing every machine category: Track-Type Tractors, Motor Graders, Skid Steer Loaders, MULTI TERRAIN LOADERS, COMPACT TRACK LOADERS, and more. Each section includes specification tables with ground pressures, travel speeds, and blade capacities. For the Bulldozer chapter, you get SAE blade capacity definitions and job condition correction factors – real numbers, not guesses. The Rippers section includes seismic wave velocity charts and estimated production graphs. That’s the kind of data you need when you’re bidding a job or deciding which machine to run.

Does This Handbook Cover Skid Steer Loader Work Tool Compatibility?

Yes. The Skid Steer Loaders/MULTI TERRAIN LOADERS/COMPACT TRACK LOADERS chapter breaks out SSL, MTL, and CTL specifications separately – dimensions, performance data, and work tool compatibility. You’ll find augers, brushcutters, cold planers, landscape tillers, mulchers, stump grinders, and over a dozen other attachments listed with their matching machine parameters. That saves you from buying a tool that won’t physically fit or hydraulically run on your machine. The handbook also covers Waste Handling Track-Type Tractors and extreme slope operation tables for both track-type tractors and motor graders.

Track-Type Tractors, Motor Graders, and Loaders – 2011 Technical Manual Content

This 2011 edition includes the Nomenclature section (page 9) explaining Caterpillar’s model numbering system. The Operator and Machine Protection section (pages 5–8) covers operator training, machine modifications, fire prevention, and safety regulations. That’s a section every shop foreman should read before letting a new operator run a D8T. The Production Formulas under Motor Graders give you formulas for estimating output – useful when you need to justify machine time to a customer.

Use the Extreme Slope Operation Tables Before You Push Material

Both Track-Type Tractors and Motor Graders have dedicated subsections on extreme slope operation. The tables list ground pressures and travel speeds for slopes – critical specs if you’re working on a dam or a highway embankment. Don’t trust your seat-of-the-pants feel. These tables come from Caterpillar’s own engineering tests. The handbook also includes All Wheel Drive (AWD) specifications for Motor Graders and Mid Mount/Front Mount Scarifiers. Need to know the physical specs of a PACCAR or Allied winch? Those are in the Winches chapter with operating specifications.

7 Machine Categories in This Edition

Besides the primary categories, Handbook 41 covers Excavators (including one-piece boom dimensions, lifting capacities, bucket types), Backhoe Loaders, Forest Products, Pipelayers, Wheel Tractor-Scrapers, Articulated Trucks, Wheel Dozers, Wheel Loaders, Integrated Toolcarriers, Track Loaders, Telescopic Handlers, Paving Products, Underground Mining Equipment, Hydromechanical Work Tools, and Engines. Each chapter includes specifications and production data. For the excavator section, you get cycle time estimating charts and front shovel specs. This manual is a broad reference – not a step-by-step service manual, but the go-to for machine selection and job planning.

Why This 2011 Edition Still Matters

Machine performance fundamentals don’t change every year. The production estimating methods, drawbar pull curves, and ground pressure tables in this handbook are based on mechanical principles that are still valid for current models. If you’re running a 2011-era machine or older, this is the exact handbook that was current when your machine was built. Newer editions may add hybrid or Tier 4 data, but for basic specs on a D6R or a 140H, this is the correct reference. The handbook also includes former model listings for cross-referencing.

Where to Find Related Manuals

• Caterpillar Performance Handbook Edition 36
• Caterpillar Performance Handbook 44
• Caterpillar Performance Handbook Edition 42

For general drivetrain theory, you might consult resources on Manual Transmission and Automotive Steering – but for Caterpillar-specific performance data, stick with the factory handbook.

Frequently Asked Questions

Is this a repair manual with torque specs?

No, it’s a performance and specification handbook. Torque values are in the Operation and Maintenance Manual.

Can I use this to estimate how much material a D6T can push per hour?

Yes. The Bulldozer section includes SAE blade capacity definitions, job condition correction factors, and production estimating formulas. Use the Job Condition Correction Factors table along with the Measuring Production On-the-Job section to get realistic hourly production. For example, a D6T with a 6SU blade pushing loose earth at 150 feet under average conditions – you’ll find the correction factors to adjust the ideal cycle time. The graphs on ground speed and drawbar pull also help you select the right gear. This handbook is built for that kind of work.

Stop guessing and start working from official data. Access the Factory Manual from AutoRepairManuals – the largest collection of OEM shop manuals in North America with verified factory specifications.