Description

Case DV209C, DV210C 2014 Operators Manual

I’m Mike Callahan. 28 years turning wrenches, and nothing burns me up faster than seeing a cracked roller frame because some aftermarket guide skipped the torque table. This is the factory Case DV209C, DV210C 2014 Operators Manual – 214 pages of what Case actually wrote for the Tier 4A vibratory roller. Not a photocopy, not a third-party summary. This is the OEM document, part number 47772902, first edition English, published September 2014.

Safety Rules and Signal Word Definitions

Section 2 starts on page 2-1 with the stuff that keeps you alive. California Proposition 65 warnings, battery safety, ROPS requirements, seat belt reminders, and a full breakdown of safety signs on the machine. The manual tells you exactly where each decal lives and what the signal words (Danger, Warning, Caution) mean. If you’re a shop owner or operator, you hand this section to every new hire before they touch the ignition. Page 2-27 has the hand signals for ground crews – critical when you’re on a jobsite with engine noise.

Controls and Instruments: Before You Start

Section 3 covers the operator station. Throttle, steering, vibration controls, instrument cluster warning lights – everything is labeled with factory part references. The manual includes a machine orientation diagram (page 1-8) so you know left from right from the operator’s seat. No guessing which lever does what. If you’ve ever tried to learn a roller’s controls from a YouTube video, you know the value of a printed index.

Operating Instructions and Transport Operations

Sections 4 and 5 walk you through daily starting procedure, warm-up, and moving the machine on a trailer. Transport lock pins, tie-down points, and weight distribution are spelled out. Miss one step and you could have a 12‑ton roller sliding sideways on a lowboy. The manual gives you the sequence, not a paragraph of fluff.

Maintenance: Section 7 Details

Section 7 is the maintenance schedule with intervals in hours. Grease points, fluid checks, filter changes – all with OEM part numbers. The EGR system (Section 1, page 1-11) is explained so you understand why the Tier 4A motor requires specific oil. You won’t find this level of detail in a generic service guide. Need the charge pressure? Page 73. Case SL1-b, SL2 1995 Operators Manual – Factory Specs gives you the same factory certainty for older machines.

DV209C and DV210C: What the 2014 Operators Manual Covers

Both models share the same frame and drivetrain, but the DV210C has a higher centrifugal force. The manual differentiates specs in Section 8 – weights, vibration frequencies, and fluid capacities. If you’re maintaining a mixed fleet, you need this single source to keep your numbers straight. I’ve seen mechanics torque vibratory bearings to the wrong value because they used a manual from a different year. Don’t be that guy.

Why Factory Specs Beat Aftermarket Every Time

Aftermarket manuals often reprint old data or generic diagrams. This Operators Manual came from Case Construction in 2014 with the exact wiring schematics, safety sign placements, and emissions‑related notes. The part numbers match the ones stamped on your machine. For transmission‑related equipment, refer to Manual Transmission for background on how torque converters differ, but for this roller, stick with the OEM document. Another external source Manual Transmission might help with theory, but when you’re bleeding hydrostatic lines, you need the factory page.

Related Manuals

• Case SV212, SV216, SV208, SV210, SV223 Operators Manual – 214 Pages
• Case SV212 SV216 1994 Operators Manual – Factory Specs

Frequently Asked Questions

Does this manual cover Tier 4A emissions systems?

Yes, Section 1 includes the EGR system description and required diesel exhaust fluid handling.

What kind of safety information is actually in this 2014 Operators Manual?

Section 2 runs 27 pages. It covers everything from California Proposition 65 to electrical storm safety, ROPS, seat belt usage, PPE requirements, and the mandatory “Do Not Operate” hang tag procedure. There’s also a full page of hand signals for the ground crew (page 2-27). If you operate this machine without reading Section 2, you’re asking for a citation or worse. I’ve seen inspectors walk a jobsite and fine operators who couldn’t show they had the OEM safety data.

If you want to run your roller without second-guessing torque values, fluid specs, or safety decal locations, get the document that Case intended. Access the Factory Manual.