Description

Case 580F Parts Catalog – 516 Pages of Factory Part Numbers

If you’ve ever ordered a part for a Case 580F and got the wrong one because some aftermarket listing said “fits 580” without specifying series or serial number, you know the headache. I’ve seen guys bolt on a non-OEM hydraulic line that didn’t clear the boom – that’s time lost, money wasted, and a safety risk if it lets go. This is the real deal: the factory Case 580F Parts Catalog, 516 pages of exploded views with OEM part numbers straight from Case. No reprints, no third-party translations that lose detail. Just the catalog Case intended for parts ordering.

Every shop that works on backhoes needs this. Whether you’re a DIY owner fixing your own machine or a tech in a six-bay shop, having the correct part number the first time is the difference between a job that pays and one that bleeds money. This catalog covers the 580 Series “F” Tractor with Loader and Backhoe – part number B 3037. It includes the base tractor (serial numbers 3.739.160 DC-TC), the backhoe attachment (3.826.344), and the cab (3.797.089). You match your serial number to the right group, and you’re done.

Why the Case 580F Parts Catalog Belongs on Your Bench

You cannot trust aftermarket parts catalogs that pull numbers from generic databases. They mix up revisions, leave out supersessions, and sometimes list a part that was discontinued without a cross-reference. This factory catalog came from Case Engineering. Each part number is verified against the original design. The PDF is a direct scan of the printed catalog – 516 pages, indexed by major groups at the front and a numerical index at the back. You flip to the page, read the reference number, cross-check the illustration, and order. Period.

Exploded Views: What You’re Actually Looking At

Page 1 of the catalog shows the title page and the three serial number ranges. Page 2 (and onward) gives you the parts ordering procedure that many mechanics skip. The catalog uses exploded views – each drawing shows parts in their normal relationship to each other. Reference numbers on the illustration match the “Reference Number” column in the parts list. Below that you get the part number, the quantity required per assembly, and a description. If you need to rebuild the backhoe swing cylinder, you find the exploded view for the swing cylinder group, note the reference number for the piston seal, and order Part Number XXXXXX. No ambiguity.

How to Read the Parts List on Page 2

Page 2 spells it out: “Parts are listed in order by reference number, followed by part number quantity required and description.” The quantities shown are the number required to make up one of the preceding assemblies. If a bolt is used in three places, the catalog says “3” in the quantity column. Don’t assume – read the column. Also notice the instruction: “All orders should plainly specify correct part number, full description, quantity required, model and SERIAL NUMBER of tractor, method of shipment, and shipping address.” That’s not a suggestion. If you omit the serial number, the dealer might send you the wrong part for a different revision. The catalog covers the 580F series, but within that series there are variants. Use the serial number range on page 1 to confirm which group your machine falls into.

3 Reasons to Choose OEM Documentation Over Aftermarket

First, aftermarket catalogs often reproduce the same illustrations but omit the serial number breaks, so you get a part that fits a 580C but not your 580F. Second, OEM catalogs include the supersession history – if a part was replaced by a new number, the notes are there. Third, the exploded views in this catalog are drawn to scale and show the correct orientation of seals, bearings, and hydraulic components. Aftermarket drawings sometimes flip the view or leave out hardware. For a machine that operates under high hydraulic pressure, one wrong seal can cost you the pump.

Ordering Parts: Get the Serial Number Right

Before you click “buy”, find your tractor’s serial number. It’s stamped on the frame near the left side of the engine. For the backhoe attachment there’s a separate serial number. This catalog lists three serial number ranges on page 1: 3.739.160 (DC-TC) for the tractor, 3.826.344 for the backhoe, and 3.797.089 for the cab. If your machine falls outside those ranges, you need the supplement. Otherwise, you’re good. The catalog also provides a numerical index of part numbers at the end – if you have a part number from an old part and want to verify it, look it up in the index and it tells you the page where it appears.

FAQ: Four Questions About the Case 580F Parts Catalog

Is this a service manual or a parts catalog?

It is a parts catalog. It shows exploded views and part numbers – not repair procedures. For torque specs and disassembly steps you need the service manual.

Can I use this to order parts for a 580 Super E?

No. This catalog is specifically for the 580F series (tractor, loader, backhoe). The 580 Super E is a different series with different part numbers. Order the correct catalog.

Does the catalog include aftermarket part cross-references?

No. It lists only genuine Case OEM part numbers. That’s the point – if you want to substitute an aftermarket part, you need the OEM number to cross-reference. This catalog gives you the factory standard.

What languages is it in?

English, French, German, and Spanish. The title page and parts ordering instructions are multilingual. Part numbers and descriptions are the same in all languages.

OEM vs Aftermarket: Why This Catalog Wins

I’ve seen counterfeit catalogs that are just poor scans of photocopies – the reference numbers are illegible, the part numbers are cut off. This file is a clean scan of the original Case publication. Every page is readable, from the front cover to the numerical index. You can zoom in on the exploded views and read the callout numbers. If you’re ordering parts for a 580F backhoe, this is the only source you should trust. Pair it with the operator’s manual for daily use and the service manual for repair work. Check out the Case 580F Loader Backhoe Operator’s Manual 2001 if you need operating instructions. For an even deeper parts reference, the Case 580F Loader Backhoe Parts Catalog C1334 covers additional attachments. And for the basics of running the machine, the Case 580F Loader Backhoe Operators Manual is a good companion.

Understanding how OEM part numbering systems work is foundational to any equipment repair. The Automotive Industry Overview explains why manufacturers use serial number breaks and supersession codes. For a broader context, the Automotive Industry Overview is worth reading.

Stop ordering parts by guesswork. Access the Factory Manual and get the correct OEM part number every time. This catalog pays for itself the first time you avoid a wrong-order return.