Description

Case 570MXT 2008 Parts Catalog

Case 570MXT 2008 Parts Catalog – if you’ve ever ordered a seal that didn’t fit or chased a part number through three different aftermarket sources, you know the waste. This is the original CNH America LLC parts book, issued 01 May 08, book number 87659341 NA. 552 pages of factory-sourced part numbers, not a reprint or a generic list. Page 1 shows the loader landscaper identification; page 2 lays out the table of contents you need to navigate this thing. No fluff, no guesswork.

Engine and Fuel System Breakdowns

Section 2 – Engine, Section 3 – Fuel System. Each section lists every component from the block to the injector lines, with the factory part number and exploded diagrams. If your 570MXT Series 3 Tier 3 needs a fuel filter head or a head gasket, you find it here with the correct CNH reference. Don’t trust aftermarket cross-references that change dimensions. Stick with the OEM data.

Does This Catalog Include Hydraulics and Brakes?

Yes. Section 7 covers the brakes, Section 8 covers the hydraulics. These sections show every seal, piston, and valve assembly with the exact part number from Racine, WI. Page references are cross-linked in the index so you can jump from a hydraulic hose to the correct assembly drawing. Works for steering (Section 5) and power train (Section 6) too.

3 Reasons to Stick with Factory Parts Books

First: accuracy. CNH America LLC reserves the right to change specs, but this 2008 edition reflects the production run of the 570MXT Series 3 Tier 3 as it left the factory. Second: illustrations. The exploded views show how parts stack, which matters when you’re ordering a rebuild kit. Third: revision history. This manual includes a revision table so you know which part numbers supersede earlier ones. Aftermarket catalogs skip that history.

Electrical System: Wiring Harnesses and Connector Kits

Section 4 – Electrical System. Every harness, connector, and relay is listed with its OEM number. If you’re chasing a short or replacing a lighting circuit, you get the factory wiring diagram reference and the part number for the connector kit. No guessing if the pigtail you ordered matches your chassis.

Chassis and Attachments: What You Need to Know

Section 9 – Chassis/Attachments. Covers the loader frame, bucket, quick-attach, and any factory options. Each attachment group has its own part-number list. If you need a bushing for the pin joint, this is where you find it.

How to Use the Index for Fast Part Lookup

Flip to the back – the index lists every part number alphabetically and by section. Find the number, note the page, and go straight to the exploded view. That saves time on a Saturday when you’ve got a loader down. The index also cross-references across sections, so a hydraulic fitting shows up under Hydraulics and in the general index.

Audience Fit – Who Needs This?

Home garage guys fixing their own 570MXT loader, small contractors maintaining a fleet, and techs who want to order the right part the first time. If you’ve been burned by aftermarket parts that don’t fit, this catalog ends the problem. It’s a parts book, not a repair manual – you still need torque specs and service procedures, but for getting the right steel, it’s the only source you can trust.

Source Validity – OEM vs Aftermarket

This is the original CNH America, LLC publication, copyright 2007, printed in the U.S.A. The file is a direct scan of the bound volume – no reprints, no third-party edits. Compare that to aftermarket parts catalogs that rearrange numbering or omit supercessions. For exact information about any particular product, consult your Dealer, but this manual gives you the same data they use. You can read more about why factory documentation matters in the Automotive Industry Overview.

Frequently Asked Questions

Is this the same manual the dealer uses?

Yes, it’s the official CNH parts catalog issued for the 570MXT Series 3 Tier 3.

Can I use this to repair my 570MXT?

No. This is a parts catalog – it lists part numbers and exploded views for ordering components. It does not contain service procedures, torque specs, or diagnostic steps. For repairs, you need the corresponding service manual. The parts catalog helps you order the correct components before you start the job.

What years does this cover?

This edition covers the 570MXT Series 3 Tier 3 from initial production in 2008. Later production changes might have different part numbers. Check the revision history on page 3 for supersessions.

How are illustrations referenced?

Every assembly has an exploded diagram with callout numbers. Each callout corresponds to a part number and description in the adjacent list. The illustrations are line drawings that show the relationship of parts within the assembly. Page numbers are given for each section, and the index at the back lets you search by part number or description. For example, if you need a hydraulic seal kit, you can find it under Section 8 – Hydraulics and then locate the exact kit number from the drawing. This system eliminates the guesswork of matching parts by eye or by aftermarket cross-lists that may be outdated.

If you maintain a 570MXT or work on Case loaders, this Parts Catalog belongs on your bench. Access the Factory Manual from AutoRepairManuals and stop guessing which part goes where. Having the OEM book means you order once, install once. Case 570MXT Loader Landscaper Parts Catalog – Section: Index covers the index in full detail. Pair it with the Case 570MXT Loader Landscaper Operator’s Manual for operating specs, and the Case 570MXT 2008 Operators Manual – Factory OEM Specs & Safety for safety information. For a broader view of heavy equipment documentation, you can also check Automotive Industry Overview.