Description

Case 350B 1995 Operators Manual

If you’re running a 350B crawler and you don’t have the 1995 operators manual on the seat next to you, you’re risking time and safety. I’ve seen too many guys skip the pre-start checks and end up with a blown hydraulic line or a brake failure because they guessed the pressure. This manual – the Case 350B 1995 Operators Manual – is the factory print, not a reprint or some third-party copy. 200 pages of exactly what Case wanted you to know. I’ll show you where the critical specs live.

Transmission and Steering/Brake Controls – Chapter Content

Flip to the section starting around page 45. The manual walks you through the transmission and steering/brake controls in the same sequence you’ll use on the machine. Foot pedal, levers, shuttle shift pattern – it’s all there with a diagram that matches the actual cab layout. If you’ve ever had a trainee lock up a track because they hit the wrong pedal, you’ll appreciate having this open on the bench during training. The brake system adjustment procedure is laid out stepwise; no guesswork about linkage free play.

Engine Operation: Pre-Start Checks on Page 65

Page 65 is where you’ll find the service and checks before you start. Oil level, coolant level, air filter restriction indicator – Case spells out the sequence. I make every operator read this section before they get the key. The engine coolant system and fuel system are covered in the maintenance section later, but the pre-start list catches the most common mistakes. Need the proper diesel fuel specs? That’s in the fuels and lubricants chart on page 119. One quick reference for everything that goes into the tank and crankcase.

How the Manual Covers the Fuel System

The fuel system chapter (pages 144-148) details bleeding procedures, water separator draining intervals, and the correct filter replacement sequence. If you’ve ever had a 350B die on a grade because air got into the injection pump, you know why this matters. The manual includes a caution about using only approved diesel fuel – no mixing with kerosene. It also cross-references the maintenance chart intervals, so you know exactly how often to change the primary and secondary filters.

Why the Roll-Over Protective Structure Specs Matter

ROPS is not optional. Page 25 of this manual covers the roll-over protective structure requirements, mounting hardware checks, and the warning about never modifying the frame. I’ve pulled machines out of ditches where the ROPS saved the operator. The manual states that if the ROPS is damaged, it must be replaced – not welded. That’s a liability issue you don’t want to guess on. The OEM documentation is the only source you should trust for these structural specs.

3 Maintenance Schedules You Can’t Afford to Skip

First: the maintenance chart for a new machine (page 121) – 10-hour, 50-hour, 250-hour checks. Second: the power shuttle transmission service (page 164) – oil change intervals and filter part numbers. Third: the track system adjustments (page 172) – track tension specs using the gauge method. Miss any of these and you’re buying undercarriage or transmission parts sooner than you should. The manual also includes the procedure for putting the machine in storage (page 186) and removing it (page 189) – critical for seasonal equipment.

Related manuals you might need: Case 350B, 450B, 550, 26D, 450C 1991 Parts Catalog for part numbers, Case 350B, 450B, 26D 1982 Operators Manual – OEM Factory Specs for earlier year variations, and Case SL1-b, SL2 1995 Operators Manual – Factory Specs for related models.

For an explanation of how a Manual Transmission operates, check the resource link. And if you’re servicing the shuttle shift, the same external source on Manual Transmission covers the basics that apply here.

FAQ

Does this manual cover the backhoe attachment?

Yes, pages 62-64 cover backhoe operation, and pages 181-182 cover backhoe service and maintenance.

What torque values are listed for the final drive?

This operators manual does not list component torque specs – that’s in the service manual. However, it covers final drive lubrication intervals, oil capacities, and inspection points. Track system adjustments are on page 172.

Can I use this manual for a Case 450B?

No. The 350B and 450B are different models with distinct driveline and engine specs. You need the specific 450B operators manual. This manual is only for the 350B crawler tractor.

Is there a maintenance chart that shows hourly intervals?

Absolutely. Pages 121-123 include maintenance charts for new machine (initial break-in) and regular intervals (10, 50, 250, 500, 1000 hours). Each interval lists specific checks: engine oil, coolant, hydraulic fluid, transmission oil, track tension, and more. The chart also cross-references the detailed procedures later in the manual.

You need the factory document on your tablet or printed out before that 350B sees another start. Every safety decal, every fluid spec, every control function – it’s all in this 200-page manual. Access the Factory Manual now and keep it with the machine.