Description

Bomag BW 6, BW 6 S 2008 Operators Manual – Factory Specs for Towed Vibratory Rollers

If you’re running a Bomag BW 6 or BW 6 S towed vibratory roller without the factory operators manual, you’re asking for trouble. I’ve been wrenching for 28 years, and the number one cause of premature failures in these machines is ignoring the manufacturer’s procedures. This Bomag BW 6, BW 6 S 2008 Operators Manual is the real deal – 78 pages of OEM documentation straight from Bomag, not a third-party rewrite. It covers both serial number ranges (S/N 101 280 03 and 101 280 22, listed on page 1) and gives you the exact specs for weights, dimensions, drive system, and vibration unit. No guesswork. Understanding the machine’s systems, from the Manual Transmission to the vibration control, starts with this manual.

Technical Data: Weights, Dimensions, and Drive Specs (Chapter 1)

Section 1 breaks out technical data separately for the BW 6 and the BW 6 S. You get the exact weights, overall dimensions, drive specifications, vibration system parameters, and electrical equipment ratings. The manual also includes noise emissions per EC directive – helpful for job site compliance. All values are in metric as published by Bomag, so keep a conversion chart handy if you work in Imperial. This chapter is where you’ll find the numbers you need before ordering parts or planning transport.

Safety Regulations: Non-Negotiable Before You Start (Chapter 2)

Chapter 2 isn’t there to fill pages. It spells out proper use, who is allowed to operate the machine, modifications that void warranty and create hazards, and the meaning of every safety sticker on the machine. It covers loading, starting, driving on slopes, parking, refueling, and maintenance safety. Bomag explicitly states that using only original spare parts is required for safety and warranty – and I’d say that’s good advice from 28 years in the business.

Meters, Controls, and Indicator Lights (Chapter 3)

This chapter walks you through every element on the control panel: the fuel level sight tube, air filter service indicator, vibration on/off rotary switch, ignition-start switch, charge lamp, oil pressure warning lamp, warning horn, emergency stop pull switch, hour meter, remote control socket and cable guide, towing eye, locking bracket, and the fuse box. Knowing what each light and switch does before you start the engine saves time and prevents mistakes. For more on general control layouts, check Manual Transmission design principles.

Operation: Coupling, Starting, and Driving the Roller (Chapter 4)

Section 4 covers everything from coupling the roller to the towing vehicle using the towing eye and locking bracket to connecting the remote control cable. You get step-by-step instructions for checking fuel level via the sight tube, verifying the air filter indicator, and testing the emergency stop before engaging the vibration with the rotary switch. The manual also tells you how to start the engine, including using jump cables if the battery is dead, and how to drive on slopes – a critical skill that can flip a roller if done wrong. Parking procedures on inclines are spelled out, and the section on uncoupling the roller is detailed enough that you won’t accidentally leave it attached when you shouldn’t.

Maintenance: Scheduled Service and Common Procedures (Chapter 5)

Chapter 5 covers routine maintenance intervals: engine work, electrical component checks, battery care, fuel system service, and cleaning. The manual emphasizes using Bomag replacement parts and following the exact procedures to keep the machine reliable. Even something as simple as cleaning the air filter or checking the oil level gets its own step-by-step because skipping one step can cost you a day of downtime. This is the section that will save you from chasing leaks or electrical gremlins later.

Frequently Asked Questions

Does this manual cover both the BW 6 and BW 6 S models?

Yes. The manual includes separate technical data for each model, covering both serial numbers listed on page 1.

What safety warnings are included for starting the engine?

Chapter 2 (Safety Regulations) details what must be checked before starting: verify the machine is on level ground, no obstacles, and all safety stickers are legible. It explicitly warns against starting if anyone is in the danger zone. Section 4.6 covers the normal starting procedure using the ignition-start switch and the emergency stop pull switch. Section 4.7 gives proper jump-starting steps to avoid sparks and battery damage. There is also a warning about never starting the engine in a closed building because of carbon monoxide poisoning. The manual emphasizes that only trained operators should start the machine.

If you take your equipment seriously – and I mean really care about keeping it running without burning up your budget on repairs – you need the actual factory documentation. This is it. Access the Factory Manual from AutoRepairManuals and keep a copy in the toolbox. You’ll thank yourself the first time something acts up and you have the right spec to go by.

Related Manuals

• Bomag MPH 454 2004 Operators Manual – OEM Factory Specs
• Bomag BW 24 R 2004 Operators Manual – Factory Specs & Safety
• Bomag BC 671 RB / BC 771 RB 2001 Operators Manual – OEM Specs