Description

Bobcat A300 2009 Service Manual – What You Actually Get on the Bench

If you’ve ever been burned by a reprint manual that gives you a torque value off by 5 ft-lbs and you end up with a warped head, you know the frustration. This is the real thing: the Bobcat A300 2009 Service Manual, straight from the factory. 966 pages, no aftermarket garbage, no missing pages. I’ve used these manuals for over 28 years, and I can tell you: if you skip a step because the manual was vague, you’re buying parts you didn’t need. This manual doesn’t let you guess.

Bobcat A300 2009 Service Manual: 966 Pages of Factory Specs

Every page is OEM content. The table of contents alone runs from MAINTENANCE SAFETY through ALPHABETICAL INDEX, with sections like CHARGE PRESSURE 30-01, HYDRAULIC/HYDROSTATIC FLUID SPECIFICATIONS SPEC-01, and A300 LOADER SPECIFICATIONS 10-01. Need charge pressure? Page 30-01 gives you the exact spec—no interpolating from a generic chart. Torque values are listed per fastener, not grouped by size. That matters when you’re tightening a Bob-Tach mounting bolt versus a steering cylinder rod end.

Charge Pressure and Hydraulic System Specs

Hydraulic repairs are where most aftermarket manuals fall apart. They tell you to “tighten until snug”—then you get a blown O-ring at 3000 psi. This manual has dedicated sections for HYDRAULIC PUMP 20-01, MAIN RELIEF VALVE 20-01, and AUXILIARY HYDRAULIC COUPLER 20-01. Each one includes the required tool list and a safety warning that tells you exactly when to install the lift arm support device. I’ve seen guys skip that step and drop a cab on themselves. Not here.

Safety Warnings You Cannot Skip

The manual opens with a full page of warnings that are specific to the A300 All-Wheel Steer model. Read them. They tell you how to properly lift the operator cab, how to avoid hydraulic fluid injection injuries, and why you never work under raised lift arms without the approved support device. The OCR excerpt shows illustrations labeled “CORRECT” and “WRONG”—that’s the factory being painfully clear. If you disregard those, you’re on your own. I won’t help you.

Does This Manual Cover the Fuel System?

Yes, under FUEL SYSTEM 10-01. It includes the entire fuel path from tank to injectors, with specifications for the engine cooling system and engine lubrication system (ENGINE LUBRICATION SYSTEM 70-01). But if you need a separate manual for a different year, check the Bobcat A300 2008 Service Manual – Section: Fuel System for variations. This 2009 edition covers serial numbers 539911001 & Above and 540011001 & Above, so verify your machine’s serial before buying.

3 Reasons to Stick with OEM Documentation

1. Every torque value is verified. Aftermarket manuals often round or copy from a similar model—that gets you a stripped thread or a leak.
2. The wiring diagrams are model-specific. The ELECTRICAL SYSTEM INFORMATION 10-01 and BOBCAT CONTROLLER (AWS) 60-01 sections are drawn for the A300, not generic Bobcat schematics.
3. Safety procedures are integrated into each repair step. You don’t get a separate safety section you ignore—the warnings appear right where you need them, next to the step that could kill you.

If you’re working on the A300 and need the drive components or chaincase, go to page 40-01. That section covers the FINAL DRIVE TRANSMISSION (CHAINCASE) with exact bolt patterns and preload specs. For the hydrostatic motor two-speed variant, see HYDROSTATIC MOTOR (TWO-SPEED) 30-01. Every subsection is cross-referenced in the ALPHABETICAL INDEX, so you can find “Bob-Tach” or “Blower Fan” in seconds.

Related Manuals You Might Need

• Bobcat A300 2008 Service Manual – Section: Front Auxiliary Hydrualic Coup
• Bobcat A300 2008 Service Manual – Section: Fuel System
• Bobcat A300 2008 Service Manual
• Manual Transmission – General knowledge on manual transmissions (for understanding non-hydrostatic systems)
• Manual Transmission – Additional reference for gear-based drivetrains

Frequently Asked Questions

Is this manual an original OEM print?

Yes. This is the factory service manual from Bobcat Company, printed in 2009, part number 6904172. No reprints, no scans from a copy.

Does it include torque specifications?

All torque values are listed in the relevant sections—for example, on page 30-01 for charge pressure connections and throughout the HYDRAULIC CONNECTION SPECS SPEC-01 page.

How many pages is the manual?

966 pages covering every system on the A300 All-Wheel Steer loader. From the ACCESS PANEL (INSIDE) 50-01 to the PIVOT PINS 10-01, it’s all here.

Can I use this for a 2008 Bobcat A300?

This manual is for 2009 models with the specified serial number ranges. For the 2008 version, get the Bobcat A300 2008 Service Manual which covers that year’s differences, including the front auxiliary hydraulic coupler section Bobcat A300 2008 Service Manual – Section: Front Auxiliary Hydrualic Coup.

When you’re ready to stop spending hours chasing down wrong specs and start working from a manual that tells you the exact tool and torque, Access the Factory Manual. This is the one you keep within arm’s reach on the toolbox—not on a dusty shelf.