Description

Atlas Copco XRY5 557 Cd, XRXS 567 Cd, and Related Models 2010 User Manual

You’ve got an Atlas Copco portable compressor on your hands. Maybe it’s the Atlas Copco XRY5 557 Cd, XRY5 1220 CD7, XRXS 567 Cd, XRXS 1240 CD7, XRXS 607 Cd 2010 User Manual – the exact factory document that comes with the machine. I’ve seen too many guys lose billable hours because they trusted an aftermarket print that left out the critical torque value for the compressor element oil filter. That’s not a gamble I take in my shop, and it shouldn’t be in yours. This is the 90-page original from 2010, published by Atlas Copco themselves.

Torque Specs and Fluid Capacities

Page 1 of the manual is the cover, but the real meat is in the Technical Specifications chapter. That section holds the critical torque values for every fastener that matters – the safety valve on the air receiver, the oil filter housing, the compressor element bolts. These aren’t general torque tables; they’re tested and signed off by Atlas Copco engineers. The oil specifications section lists exactly which compressor oil and engine oil grades to use, plus the viscosity for your CAT C18 engine. No guessing about 15W-40 vs 10W-30 – it’s in there.

Safety Procedures: What the Manual Forces You to Read

The first chapter is seven pages of safety precautions. Transport, installation, operation, maintenance – each has its own sub-section. If you’re towing an XRXS 607 Cd behind a service truck, you need to know the exact towbar leveling procedure from the Wagon instructions. Skip that and you risk a dropped tongue weight or a broken coupling. The manual also covers emergency stop procedures and fault codes on the control panel. I make every new hire read the Safety during maintenance and repair section before they touch a wrench.

7 Critical Maintenance Chapters

The Maintenance chapter is where this manual pays for itself. It covers the preventive maintenance schedule, oil level checks for both compressor and engine, oil and filter changes, coolant specs (PARCOOL EG), battery care, and even compressor element overhaul. Each procedure comes with a parts reference – service kits and service paks are listed by part number. Need to clean the coolers? The manual tells you the solvent and the pressure limit. Want to know when to replace the air filter safety cartridge? It’s in the Adjustments section, right after the pneumatic regulating system adjustment.

OEM Documentation vs. Aftermarket Reprints

I’ve seen third-party manuals that claim to cover the XRXS 1240 CD7 but skip the Oiltronix failure troubleshooting or the heater failure diagnostics. This manual is the real deal – exactly what Atlas Copco prints and ships with the compressor. The page count, the part numbers, the torque values – all verified by the manufacturer. If you’re working on a machine that uses the proprietary pneumatic regulating system from page 20, you want the factory diagram, not a blurred photocopy. That’s why I keep a copy in my tool box and another on the shop tablet.

Adjusting the Pneumatic Regulating System

The Adjustments and servicing procedures chapter walks you through the pneumatic regulating system adjustment. It’s not a generic “tighten until it feels right” – the manual gives you the specific pressures and valve settings for the air flow circuit. Same for the brake adjustments on the Wagon versions: you get the shoe adjustment procedure and the brake adjustment specs. These details matter when your compressor lives on a job site and you need it to pass a DOT inspection.

For related factory documentation, check the Atlas Copco Portable Compressors Instruction Manual”>complete set of Atlas Copco compressor manuals or the Instruction Manual Portable Compressors XAHS/XAS Series”>XAHS/XAS series instructions if you’re dealing with a different model. If you also need generator documentation, the Instruction Manual for Atlas Copco AC Generators QAC 500″>QAC 500 manual covers that side of the equipment.

External references: I always cross-check torque specs with the Manual Transmission”>manual transmission service guides when the compressor is used to power pneumatic tools in a truck shop, but the compressor’s own specs take priority. The Manual Transmission”>manual transmission rebuild procedures often rely on consistent air pressure, which this manual helps you maintain.

FAQ – Common Questions About This Manual

Does this manual cover the XRXS 607 Cd?

Yes. The 2010 user manual explicitly includes XRXS 607 Cd, XRXS 1240 CD7, XRXS 567 Cd, XRY5 557 Cd, and XRY5 1220 CD7. All models share the CAT C18 engine and the same pneumatic regulating system.

Are torque values in imperial units?

Yes. The manual gives all critical torque values in foot-pounds (lb-ft) and inch-pounds (lb-in) for North American compliance. The general torque table at the back also includes Nm for reference.

Does the manual include wiring diagrams?

It includes the electric system overview and control panel diagrams. The battery switch, power ON/OFF, and remote control circuits are covered. For deeper electrical diagnostics, you’ll need the separate service manual.

Where do I find the oil change interval?

Page 37 of the preventive maintenance schedule specifies compressor oil change every 500 hours and engine oil change per the CAT C18 manual. The exact interval is in the Maintenance chapter.

This manual is the factory reference. Access the Factory Manual and keep it with your compressor. You’ll find every critical torque value, every service interval, and every safety warning exactly as Atlas Copco intended. No re-interpretation, no missing pages – just the 90-page original PDF that keeps your machine running and your crew safe.