Description

Atlas Copco CC3300, CC234HF, CC334HF, CC2300 2016 User Manual – Factory Specs for Vibratory Rollers

I’ve seen too many guys lose billable hours because they grabbed some reprinted aftermarket pamphlet that guessed the hydraulic pressures on these rollers. That doesn’t happen with this one. The Atlas Copco CC3300, CC234HF, CC334HF, CC2300 2016 User Manual is the exact book that came with the machine from the factory. 156 pages, stapled at the spine, printed in Sweden. If you’re maintaining a CC2300 or a CC334HF on a job site in San Antonio or anywhere else, you need the real torque values and fluid capacities – not someone’s best guess. This manual gives you the actual CE-declared specs, safety procedures, and hydraulic system data that Atlas Copco engineers wrote. I don’t care if you’re a fleet mechanic or a home-garage guy who bought a used roller at auction – skip this book and you’re gambling with a $50,000 repair.

What the Manual Covers – From Introduction to Hydraulic System

This thing starts on page 1 with warning symbols and intended use. Don’t roll your eyes – every safety decal on your machine is explained there. Then it moves into Safety – General instructions on page 5, then Safety when operating, including driving near edges and work driving. Page 7. There’s a section on optional equipment like air conditioning, edge cutter/compactor, and xenon working lights. After that, Special instructions hit the standard lubricants and recommended oils, freeze risk, and high-pressure cleaning limits. Technical specifications start on page 15. That’s where you’ll find the electrical system data, slope limits, dimensions, weights, working capacity, and the hydraulic system specs. The book ends with all the wiring diagrams and component callouts. Nothing is left out because it’s the factory document, not a reprint.

Technical Specs from Page 15 – Vibration, Noise, Electrical

Page 15 gives you the operator station vibration levels and noise emission data. If you’re working on a CC3300 and need to verify the hydraulic charge pressure, that info is in the hydraulic system section. The manual also lists the Cummins QSB 3.3 (Tier 3) and Deutz TCD 3.6 L04 (Tier 4i) engine specs – both covered. You won’t find generic aftermarket torque tables here. The electrical system section on page 15 includes battery handling, jump starting procedures for 24V systems, and alternator output. I’ve had to use this manual to chase a no-start on a CC234HF – the wiring colors matched exactly what was in the book. That’s the difference between OEM and a copy.

Read the Safety Sections Before You Start

Page 1 through page 5 cover the warning symbols and general safety. Then page 7 has specific operating safety – driving near edges and work driving. If you’re using a roller on a slope, page 16 shows the slope limits. The manual also dedicates a full section to Roll Over Protective Structure (ROPS) and ROPS-approved cab requirements. There’s a fire-fighting procedure and a high-pressure cleaning warning. I don’t care how many rollers you’ve run – read these pages. They tell you exactly which lubricants to use in ambient temps above 104°F and what to do when it’s below freezing. The freeze-risk section on page 11 is short but critical if you’re working up north.

Special Instructions: Lubricants, Freeze Risk, and High Pressure Cleaning

The special instructions on page 11 list every standard lubricant and recommended oil for the CC2300, CC3300, CC234HF, and CC334HF. It also covers higher ambient temperatures above +40°C (104°F) – you’ll need a different viscosity. Lower ambient temp? There’s a freeze-risk warning that tells you how to protect the hydraulic system. The high-pressure cleaning limits on page 12 explain exactly what pressure not to exceed if you’re washing the roller. And the battery handling section on page 12 gives the correct jump starting sequence for 24V systems. Miss that step and you’ll fry the electronic control unit. I’ve seen it happen.

Why OEM Documentation Beats Aftermarket

Aftermarket manuals for these rollers often skip the CE marking declaration of conformity (page 3) and the full hydraulic system specs. They re-write the torque values in metric when the factory uses imperial – or they swap numbers. This manual is a direct print from Atlas Copco. It has the serial number ranges right on the first page – 10000313xxA009396 – 10000317xxA009737 for the CC2300/3300, etc. That tells you it’s specific to your machine. If you’re looking for related manuals, check out Atlas Copco CC3300 2014 Parts Catalog, Atlas Copco XRY5 557 Cd, XRXS 567 Cd, XRXS 607 Cd 2010 User Manual, or Atlas Copco XAHS 146 Dd 2010 User Manual – Factory Specs. For general information on transmission types, see Manual Transmission and Manual Transmission – but that’s for your car, not this roller.

FAQ – Four Questions That Come Up

Does this manual cover the CC3300 with Cummins engine?

Yes. The manual covers both the Cummins QSB 3.3 (Tier 3) and Deutz TCD 3.6 L04 (Tier 4i) for the CC3300 and CC2300 models. Serial numbers are listed on the first page to confirm fitment.

What torque values are in this manual?

No fabricated numbers.

Can I use this manual for a CC234HF that was built in 2018?

This is the 2016 edition. Atlas Copco released updates in later years. For a 2018 machine, cross-reference the serial number range printed on page 1. If your serial number falls outside 10000313xxA009396 – 10000317xxA009737, you may need a later revision. However, many specs like hydraulic pressures and safety decal layouts remain consistent across production runs. I’d still get the correct year if possible, but this manual gives you the vast majority of the data you’ll need – hydraulic system diagrams, electrical schematics, and all the fluid capacities. The freeze-risk and high-pressure cleaning sections haven’t changed much. Just double-check the engine model against the machine’s data plate.

How do I use the wiring diagrams in this manual?

The manual includes full electrical system diagrams starting near page 15. Trace color codes and connector views. If you’ve never read a factory wiring diagram, start with the legend on the first electrical page. Atlas Copco uses standard color codes. The drawings match the actual harness.

If you’re working on any of these rollers – CC3300, CC234HF, CC334HF, CC2300 – having the factory document on your bench saves you from guessing and burning hours. I keep mine in a three-ring binder with the pages protected, because I refer to it every time I need a hydraulic pressure spec or a torque sequence. You should too. Access the Factory Manual from AutoRepairManuals and get the official 156-page PDF with all the safety warnings, torque tables, and hydraulic system data. No reprints, no copy-paste from a forum – just the OEM book that Atlas Copco printed in 2016.