Description

ASV PT-30 2008 Parts Catalog – Factory Exploded Views & Part Numbers

If you’ve ever had a rubber track loader down because you ordered the wrong lift arm seal or a mislabeled hydraulic filter, you know the cost of guessing. The ASV PT-30 2008 Parts Catalog is not a service manual with torque specs – it’s the factory-issued exploded-view book that tells you exactly which part number goes where on a PT-30 with serial number PTA 03462 and later. Printed March 2008, all 23 pages are straight from the manufacturer. No reprints, no aftermarket redraws.

Cab Assembly and Serial Number Cutoff – Page 1-A

Every assembly in this catalog footnotes ”Serial # PTA 03462-Current*”. That asterisk means the manual covers machines built up to the print date. If you’ve got an older PT-30, some parts may differ – but for the vast majority of 2008-and-later models, the Cab (R.O.P.S.) Assembly on page 1-A gives you the exploded diagram and corresponding OEM part numbers for the roll cage, glass, and hardware. Want the enclosed cab option? That’s on page 3-A. Light bar assembly? Page 2-A. The factory grouped everything by major system, not alphabetically, so you flip to the section that matches the part you’re holding.

Hydraulic Systems – Reservoir, Control, and Drive Pump Sections

Hydraulic leaks cost you time. The Hydraulic Reservoir Assembly (page 7-A) shows filler necks, breathers, and tank seals. The Hydraulic Control Assembly (page 8-A) maps out the loader valve, relief cartridge, and seal kits. For the drive and auxiliary pumps, turn to page 9-A. Each component carries an ASV part number – no chasing cross-references. The manual also includes a dedicated Hydraulic Service Items & Lubricants table after the TOC that lists the hydraulic oil filter (ASV P/N to be confirmed from manual), seal kits for the loader valve and bucket/tilt cylinder, and the rod-end gland nut. If you’re rebuilding a cylinder on a PT-30, that seal kit number is worth the price of the catalog alone.

General Service Items – Engine Oil Filter to Grease Tubes

Page 3 of the catalog lists routine maintenance parts with manufacturer and ASV part numbers. Engine oil filter? Perkins 140517050, ASV P/N 0200-377. Primary air filter? Donaldson P821575, ASV 0304-434. Secondary air filter? Donaldson P822858, ASV 0304-435. Fan belt, fuel filter, antifreeze (ethylene glycol long-life, gallon and case quantities), and engine oil in quarts and gallons with multi-grade 10W-30 spec. Even the grease tubes – multipurpose lithium, available singly (0300-769), in boxes of 10 (0402-844), or cases of 40 (0402-834). You’ll find the equivalent OEM names so you can buy from the filter distributor without guessing cross-numbers.

Undercarriage and Lift Arm – RT and LT Assemblies

Track loaders live on their undercarriage. The Undercarriage Assembly sections are split right (page 13-A) and left (page 14-A). Each gives the exploded view of rollers, sprockets, idlers, and track adjusters with ASV part numbers. The Lift Arm Assembly (page 15-A) includes the structure and pins; Lift Arm Tubes and Fittings (page 16-A) cover hydraulic line routings. Need the quick-attach plate? Page 17-A has the quick attach assembly, and page 18-A covers the adapter accessory. For the torsion axle (page 12-A) and engine assembly (page 10-A), you get the same factory layout. This catalog eliminates the “I think this part fits” game.

Parts Catalog: What You Get in 23 Pages

Nineteen numbered sections plus a two-page lubricant table. Every section references the serial number range. The paper is thin but the information is dense. No wiring diagrams, no step-by-step removal procedures – that’s what a service manual is for. But if you need a part number for the cab heater assembly (optional, page 19-A) or the fuse panel layout (page 11-A), this is the only source that has the factory drawing with ASV’s own numbering. Aftermarket parts websites often redraw these diagrams and drop fine details like thread-lock locations or washer thicknesses. The factory print doesn’t cut corners.

Is This Manual Useful for a DIY Mechanic?

If you keep a PT-30 on your property and handle your own repairs, yes. The biggest headache in ordering parts is getting the wrong revision. This catalog shows you the exact shape and position of every bracket, hose, and fastener. You can hand the page to a dealer and say “I need part number 0300-769” – they’ll match it immediately. Beginners should know this is not a repair guide. You still need a service manual for removal torque and bleeding procedures. But for sourcing parts? This is the only reference that carries factory authority. Check the ASV SR-80 2007 Parts Catalog – Factory Exploded Views & Part Numbers if you need a similar catalog for a different model. The ASV ST-50 2008 Parts Catalog – OEM Factory Manual also covers a track loader from the same era. And for those working on the SR-70, look at ASV SR-70 2007 Parts Catalog.

Before you pick up a wrench, understand the value of a factory-original parts catalog. Third-party diagrams sometimes “merge” revisions and drop critical notes. The PT-30 catalog came off the same press as the machines, printed 3/08 with part number 2010-193. For a broader look at the Automotive Industry Overview, Wikipedia covers construction equipment manufacturing practices. But for this specific loader, you want the official document. Automotive Industry Overview – that link is for context; the part numbers here are the real payload.

Frequently Asked Questions

Does this catalog include torque specifications or service procedures?

No. This is a parts catalog, not a service manual. It shows exploded views and part numbers only.

How does the serial number cutoff affect my PT-30 if it’s older than PTA 03462?

If your machine has a serial number below PTA 03462, some assemblies (especially the cab, chassis, and undercarriage) may have different part revisions. The catalog explicitly states “Serial # PTA 03462-Current”. You can still use it as a reference, but verify with a dealer for pre-cutoff models. The 2008 print date means it’s current for machines built that year and later. Earlier PT-30s underwent changes in the torsion axle and lift arm that are not captured here. The best practice is to match your serial number against the manual’s stated range. If your machine falls outside, search for an earlier revision parts catalog.

Can I use this catalog to order parts directly from ASV or a dealer?

Yes. Every part listed has an ASV part number. Dealers will accept that number. The catalogs are used by their own parts departments. Just bring the page number and the number.

Are the lubricant specifications in the manual still recommended for current maintenance?

The lubricant table lists engine oil (10W-30 multi-grade), grease (multipurpose lithium), and antifreeze (ethylene glycol long-life). These are still common specifications. However, ASV may have updated filter part numbers or oil viscosities for newer models. For the 2008 PT-30, these specs are correct and safe to use.

When you need the right part the first time, stop burning time on cross-reference websites. Access the Factory Manual and get the exploded view with OEM numbers directly from ASV’s print. 23 pages, 19 assemblies, serial-specific – that’s what you’re paying for.