Description

Ammann ASC 90 Parts Catalog – 432-Page OEM Spare Parts Manual

Hand me a parts manual that lists the wrong hydromotor seal and I’ll hand you a machine down for a week. That’s why I keep the Ammann ASC 90 Parts Catalog within arm’s reach at the shop. You’re ordering a $900 hydromotor assembly for a roller that pays $150 an hour? One wrong part number and that machine sits while you wait for the return. This is the factory catalog – 432 pages of exploded views, reference numbers, and part callouts that match what Ammann bolted on at the factory. No reprints, no third-party interpretation. You get the same PDF the dealer’s parts counter uses.

What This Parts Catalog Covers

Open the table of contents and you’ll see every major assembly broken down by section. Vibrating drum starts at section 1. Pad foot drum at section 10. Rubber mountings at 15 and 16. The vibrator assembly at 21. Front drum drive with hydromotor modifications at 30-6 A and 30-6 B. Drive of travel – that’s your transmission – at section 32. Rear frame, cabin weldment, engine sections 105A and 105B for the Cummins. Hydraulic system of travel, steering, vibrations, lifting – it’s all in there. Each section lists the part number, description, and quantity per machine. You won’t find generic illustrations that leave you guessing which bolt washer goes where. The drawings are specific to the ASC 90 serial number range starting at 101.

432 Pages of OEM Part Numbers

Aftermarket catalogs cut corners. They’ll show a generic hydromotor and tell you it “fits multiple models.” That’s how you end up with a port mismatch on a Friday afternoon. This manual gives you the exact OEM number – down to the seal kit. For example, section 30-7 covers the AUX. TRANSMISSION, and section 95-1 covers another AUX. TRANSMISSION. Two different assemblies, two different part numbers. The catalog shows both. You need a brake drum? Section 98 DRIVE OF REAR AXLE. A hydraulic tank? Section 362 and 363. Every page is scanned from the original factory print. The index at the back cross-references part numbers so you can find the section fast. Ammann ASC 70/90/110/150/200 2004 Workshop Manual pairs with this parts catalog when you need torque specs for reassembly.

Transmission Section: AUX. TRANSMISSION Details

The transmission breakdowns are worth the price alone. Section 95-1 and 95-2 A/B show the hydromotor drive for the travel system. Section 30-7 covers the front drum drive’s auxiliary transmission. You see the exact bearing numbers, shaft seals, and flange bolts. If you’re rebuilding a travel motor on an ASC 90, you need the parts catalog open on the bench. The workshop manual tells you how to R&R it – this tells you what to order. Same goes for the rear axle drive at section 98. Each subassembly has its own illustration with callout numbers that match the parts list below. No flipping back and forth trying to match a blurry diagram.

Use the Ordering Instructions Correctly

Page 3 of the catalog has the official ordering instructions in six languages. Ammann spells out exactly how to reference the machine serial number and the part number. They also include a warning: if you install parts using procedures that don’t match the shop manual, the manufacturer isn’t responsible for damage. That’s standard – but it tells you this catalog is meant to be used alongside the service manual, not alone. Ammann ASC 70/90/100/110/130 2008 Workshop Manual – Factory Specs covers the R&R procedures for the parts you’re ordering. Don’t skip that step.

Why Factory Documentation Matters

I’ve had techs bring me aftermarket parts lists that show the wrong number of bolt holes on a drum mount. The factory catalog doesn’t have that problem. Every illustration in this PDF was drawn from the production line drawings. The part numbers are the same ones stamped on the components. You need a water heater assembly? Section 600. Fire extinguisher bracket? Section 625. Rating plate? Section 69 and 511. The level of detail eliminates the back-and-forth with the dealer. For a deeper look at how the automotive industry structures parts documentation, check out the Automotive Industry Overview. The same principles apply to construction equipment – standardized part numbering, cross-referencing, and revision control. Automotive Industry Overview gives context on why OEM data stays reliable.

Frequently Asked Questions

Does this catalog include the Cummins engine parts?

Yes. Sections 105 A and 105 B cover the engine Cummins with full part breakdowns. You get the water pump, injectors, gaskets, and turbo components.

Can I use this catalog to order hydromotor seals for the front drum drive?

Absolutely. Section 30-6 A and 30-6 B list the hydromotor modifications for the front drum drive. Each modification has its own part numbers for seals, shafts, and flanges. If your ASC 90 has an ATC system, section 311 and 312 cover the front drum drive ATC separately. The catalog distinguishes between standard and ATC versions, so you order the right seal kit the first time. Also check section 95-2 A/B for the travel drive hydromotor – those seal kits are different. The manual gives you the exact OEM number, which you can cross-reference with the dealer. I’ve used this catalog to pull part numbers for three different ASC 90s on the lot, and every number came back correct.

You need the right parts to keep a roller earning. This is the same PDF Ammann ships to dealers. Access the Factory Manual and put the ASC 90 back to work.

Related Manuals

• Ammann AC110-2 Parts Catalog – 182-Page OEM Spare Parts Manual