Description

Zetor 3320, 3340, 4320, 4340, 5320 2002 Parts Catalog

You have a Zetor tractor sitting in the bay with a blown crankshaft. You need the exact part number for the crank, the bearings, and the seal kit. Pulling up some third-party aftermarket catalog with blurry drawings and wrong numbers is a guaranteed way to waste your afternoon. Zetor 3320, 3340, 4320, 4340, 5320 2002 Parts Catalog from AutoRepairManuals is the real deal – OEM factory print, 372 pages, five languages, and every diagram came off the same press the dealer uses.

Crankshaft and Crankcase: Section 002 and 003

Group 002 covers the crankshaft housing – the crankcase gasket set, the bedplate bolts, the oil pan. Group 003 walks you through the crankshaft mechanism itself: the main bearing shells, the thrust washers, the pulley end, and the flywheel flange. On page 27 you will find the exact part numbers for each main bearing journal size – there is no guessing which insert goes where. If you are rebuilding a 3320 or a 5320, this is the page you tape to the workbench.

Need a Part Number for the Clutch? Section 11

Dual clutch assembly on these Zetors is a pain to pull. Section 11 gives you the complete exploded view of the dual clutch, including the driven plates, release bearing, and the bolts that hold the cover. One glance at the diagram and you know exactly what to order. No squinting at a photocopy. The part numbers are listed in five languages – Czech, German, English, French, Spanish – so you can cross-reference with the parts counter anywhere.

7 Major Systems Covered in the 2002 Catalog

This catalog does not skip any system. From the crankcase (group 002) all the way to the front wheel axle (group 172a) and the PTO shaft controls. The fuel system (group 009) gives you the injection pump, nozzles, and filter housing. The cooling system (group 013) includes the radiator, thermostat, and water pump – and yes, the water pump is section 017 on its own page. The valve gear (group 04), cylinder head (group 005), lubricating system (group 07), compressor (group 09), exhaust (group 014), turbocharging (group 15 for the 7320/7340 models) … it is all here. 372 pages of factory engineering.

Get the Right Part Without Wasting a Day

Every time you order a wrong part you lose a day of labor and a customer starts calling. With this catalog you look up the part number from the factory drawing, check it against the revision, and place the order. The explanatory notes starting on page 13 tell you exactly how to read the numbering system – what the index letter means, how to find the correct variant for your tractor’s production number. The production numbers are listed on page 2: Z 3320-3340 from serial 8966, Z 4320-4340 from 6796, Z 5320-5340 from 5333. Match your tractor’s serial number and you are in the right section.

Fuel System: Factory Part Numbers for Injection and Pump

Fuel system components are expensive and wrong ones cost you money. Group 009 covers the full fuel system – the injection pump, the supply pump, the injectors, the fuel lines, and the filter housing. The catalog includes the part numbers for the delivery valves, the plunger-and-barrel sets, and the gasket kits. If you are rebuilding a 4340 injection pump, you order exactly what the drawing shows.

Related manuals you might need: Zetor Spare parts Catalog 2003 covers later production runs. Zetor 3320-5320 2003 Parts Catalog – OEM Factory Specs is another source for the same platform. Zetor 3320-5320 1996 Operators Manual – 260 Pages OEM if you need operating procedures. For background on how OEM documentation affects the Automotive Industry Overview – yeah, farming equipment falls under the same principles of genuine data.

Does this catalog include torque specs for assembly?

No. This is a parts catalog – it lists part numbers and exploded views, not service specifications. You need the service manual for torque values.

How are the part numbers organized across the different language sections?

Every group (e.g., 002, 003) is repeated in five languages: Czech, German, English, French, Spanish. The drawings are identical, but the part numbers remain the same across all language columns. The index number next to each part on the drawing corresponds to a row in the table that lists the part number, description in each language, and quantity. If your 5320 has a different serial number range, the notes on page 13 explain which sub‑group applies. The catalog covers all five models – 3320, 3340, 4320, 4340, 5320 – and includes the turbo models 7320/7340 in group 15. Cross‑reference by section number, not by page – the page numbers shift between languages, but the section numbering is fixed.

Stop ordering parts by memory. Access the Factory Manual from AutoRepairManuals and get the exact OEM part numbers that match your tractor’s serial number. Your Zetor will be back in the field faster, and you will not have to explain to the boss why the wrong clutch disc is sitting on the shelf.