Description

White R-2156 Parts Catalog – Factory Numbers You Can Trust

If you’ve ever ordered a part for a White R-2156 Parts Catalog forklift and got the wrong piece because some online listing used a photo from a different model, you know the pain. This 143-page catalog fixes that. It’s the original OEM document White shipped with the lift trucks. No aftermarket reprints, no guesswork. Every engine, transmission, brake, and steering component is listed by factory part number with exploded views that match what’s on your machine.

Engine Components and Camshaft Coverage

The engine section breaks down cylinder blocks (pages 8–12), cylinder heads, and the complete valvetrain. You’ll find specific pages for the Camshaft, Valve, rocker arms, push rods, and tappets starting on page 14. Need a Crankshaft or connecting rods? Those are grouped on pages 20–24. The illustrations are drawn from actual White blueprints, so the orientation and bolt patterns match the hardware on your bench.

Does This Parts Catalog Include Transmission Breakdowns?

Yes – the transmission gets its own set of pages. The converter is on page 64, transmission case on 64–66, clutches and shafts on 70, controls on 74–76. There’s even a separate listing for the transmission control valve on page 72 and the neutral start switch alongside it. If you’re rebuilding a torque converter, page 65–68 covers the pump and internal parts. Every nut and seal has a part number, not just the big assemblies.

143 Pages of Factory Part Numbers

This isn’t a service manual that tells you how to turn a wrench. It’s a parts catalog that tells you what part number to order. The foreword explains the numbering system and includes a numerical index on page 131. That index lets you look up any part number and find which illustration it belongs to. For example, need a spark plug for LP gas? Page 2 lists Champion P‑9 with the OEM number 30‑7000662. Gasoline version uses Champion D‑14, number 30‑7000681. Those details are what keep you from buying the wrong plug.

Get the Correct Valve and Crankshaft Specs

When you’re matching pistons, rings, and bearings, you need the exact factory group numbers. The Engine chapter arranges pistons and rings alongside the crankshaft and connecting rods (pages 20–24). Valve guides, seats, and springs are in the cylinder head section (pages 8–12). Because this is OEM documentation, the part numbers are the same ones White used on the assembly line. That means no “will fit” listings – you get the actual item that was installed when the truck left the factory.

Brakes and Steering: Illustrated Parts Lists

Brakes are covered on pages 46–48–49, with separate entries for the master cylinder on 28–30. Steering gear is on pages 102–104, power steering booster on 106. The steering axle breakdown on pages 82–84 shows kingpins, bearings, and seals. Each exploded view has a reference number next to every component, and the part list below gives the OEM number and description. Example: the inching linkage is on page 96, and the pedals for brake and inching are on page 94. No guessing where that return spring goes – the illustration shows it.

Why OEM Beats Aftermarket Catalogs

I’ve seen aftermarket catalogs where the picture shows a different model year or the part number has been superseded three times. This White catalog is the original. The foreword states that old part numbers are shown in parentheses when replaced, so you can trace the supersession. It also includes serial number breaks for the R‑2156 line. That means you know exactly which parts apply to your truck’s serial number range. Aftermarket “universal” catalogs don’t give you that detail.

Fuel System: Gasoline, LP Gas, and Diesel

If you’re working on a carbureted engine, the gasoline carburetor is page 32, LP gas carburetor page 48. Diesel injection pump is pages 34–36, and the fuel filter for diesel is pages 38–40. Fuel pump, tank, and lines have their own entries (pages 31, 45). The LP gas equipment is page 30, with the regulator on pages 46–48. The catalog even covers the starting aid for diesel on page 34. That level of specificity is what you need when the forklift won’t start and you’re trying to figure out which injector line is correct.

White built these trucks with either gasoline, LP gas, or diesel engines. The catalog gives you separate part listings for each fuel type, so you never order a gasoline carburetor for a diesel machine.

Does this catalog cover the LP gas carburetor?

Yes, page 48 lists the LP gas carburetor with OEM part numbers.

How do I use the numerical index to find a part?

The numerical index on page 131 lists every part number in ascending order. You cross‑reference that with the exploded view sections. The foreword explains that reference numbers in the illustrations correspond to the part lists. This saves hunting through the whole book. For example, if you have a bolt part number from a previous order, you look it up in the index, find the page where it appears, and see the exact assembly it belongs to.

If you need to identify a part on a White R‑2156 without wasting time on cross‑referencing junk, Access the Factory Manual here and keep it on your workbench.

Related Manuals

• White MY20, MY25, MY30, MY40C Parts Catalog – OEM Forklift Part Numbers”>White MY20, MY25, MY30, MY40C Parts Catalog – OEM Forklift Part Numbers
• White MA20B, 25B, 30SB 1979 Parts Catalog – OEM Factory Specs”>White MA20B, 25B, 30SB 1979 Parts Catalog – OEM Factory Specs
• White MA20, A25, A30S Parts Catalog – OEM Forklift Part Numbers”>White MA20, A25, A30S Parts Catalog – OEM Forklift Part Numbers

For background on how internal combustion engines work, see Internal Combustion Engine”>Internal Combustion Engine. For an overview of the automotive industry, check Automotive Industry Overview”>Automotive Industry Overview.