Description

Terex TX860B 2010 Parts Catalog – Factory OEM Documentation

Ever ordered a seal kit for the stabilizer cylinder and got the wrong one because some online parts diagram didn’t match? I’ve seen it happen. The Terex TX860B backhoe loader has multiple variations – sideshift, centremount, 2WD, 4WD – and if you’re not using the factory parts catalog, you’re gambling. This isn’t about fixing a lawnmower; it’s about keeping a heavy piece of equipment running without burning hours on wrong parts.

That’s where the Terex TX860B 2010 Parts Catalog comes in. It’s not a reprint or a scanned copy someone cleaned up in Photoshop. It’s the original factory document Terex released in August 2010, 2657 pages of exploded diagrams and part numbers. Every bolt, every seal, every cylinder assembly is listed with its OEM reference. No aftermarket guesswork.

Digger Stabiliser Cylinder – Where the Part Numbers Live

Need the stabilizer cylinder assembly? Look at pages 18 and 20. The Digger Stabilisers – Sideshift Stabilizer Cylinder section appears twice in the table of contents because there are two variants – different part numbers for the same basic component depending on chassis configuration. Page 18 shows the first, page 20 the second. Each includes the cylinder body, piston rod, seals, and mounting brackets. Ordering the wrong one means downtime. This catalog ends that.

Chassis Breakdown – Sideshift and Centremount

Two chassis types: sideshift short and centremount short. The manual dedicates pages 14–32 to these, including Digger Stabilisers – Sideshift Mechanical Installation on page 26. If you’re swapping a stabilizer frame or replacing a worn stabilizer cylinder, you need the correct chassis section to match hardware. The diagrams show every fastener location and bracket orientation. Don’t trust a third-party website that might have mislabeled a part.

Front Axle: 2WD vs 4WD – What the Manual Shows

This catalog covers both driveline options in detail. Starting at page 42, Front Axle – Installation 2 Wheel Drive/2 Wheel Steer, then jumps to Front Axle – Wheel Hub 2 Wheel Drive/2 Wheel Steer on page 48. After that, the 4WD installation sections run from page 50 through 72. Each page cluster breaks down the axle housing, steering pivot, and hub assemblies. If you’re rebuilding a front axle, you need the specific sub-section for your drive type. The catalog makes that split clear.

One thing that gets overlooked: the engine covers. Pages 34–38 show the yellow and white cover options. They look similar but have different part numbers. A buddy of mine ordered a white cover for a yellow machine and had to drill new holes. Avoid that.

Why the Factory Parts Catalog Beats Aftermarket Schematics

Aftermarket parts catalogs often condense multiple model years into one diagram, leaving out critical variant differences. With 2657 pages, this Terex document doesn’t skip anything. Every revision or production change that existed by August 2010 is accounted for. The table of contents alone is three pages. For a broader industry context, see the Automotive Industry Overview. That page won’t tell you the part number for a TX860B stabilizer cylinder, though. Only this manual does.

Period. That’s the difference between getting the job done and chasing returns.

Terex TX860B 2010 Parts Catalog – What You Get

2657 pages. OEM Terex copyright. Full chassis, digger, engine cover, and front axle coverage. Automotive Industry Overview might be interesting, but it’s not going to help you find the correct bushing for the stabilizer cylinder. This manual will. For related factory documents, check these:

• Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual
• Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages
• Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual

Is this a service manual or a parts catalog?

Parts catalog only.

What pages cover the stabilizer cylinder?

Pages 18 and 20 for the sideshift stabilizer cylinder assemblies. Additional sections on pages 28 and 30 repeat the same diagram with possibly different part numbers depending on chassis variant. If your TX860B has a centremount configuration, check pages 32 and beyond for similar sections. The catalog indexes everything by chassis type, so you must know whether you have sideshift or centremount before ordering. The part number for the cylinder seal kit will differ, and this manual gives you both. No aftermarket site will do that.

What format is the access?

PDF file, 2657 pages, searchable and printable. No watermarks.

Can I use this for a different model year?

No. Specific to TX860B 2010 model.

Stop wasting time with generic diagrams. Access the Factory Manual directly from AutoRepairManuals and get the exact part numbers Terex intended.