Description

Terex TR35 2006 Parts Catalog – OEM Factory Parts Breakdown

I’ve been wrenching on heavy equipment for three decades, and nothing irritates me more than a part that doesn’t fit because some aftermarket list had the wrong number. This Terex TR35 2006 Parts Catalog is the real deal – 422 pages straight from the Motherwell, Scotland factory. If you’re working on a TR35 off‑highway truck (Cummins QSM11 Tier 3, Allison 4500 ORS transmission, serial T8771011 and above), this book gives you every part number Terex used when that machine was built. No reprints, no third‑party data.

SECTION 100 – Chassis: Start Here for Frame and Mounting Parts

You’ll find the frame rails, crossmembers, brackets, and all the hardware that holds the truck together. Every fastener, bushing, and plate is listed with the correct OEM reference. If you’re replacing a damaged chassis component, this section saves you the hassle of measuring and guessing. Flip to the chassis index and you’re inside the factory parts list.

SECTION 140 – Front Axle Group: Steering Cylinder and Sub‑section 0120

The front axle group covers everything from the kingpins to the steering arm. Sub‑section 0120 specifically covers the steering cylinder – seals, rod, piston, and mounting hardware. If the cylinder leaks or the steering drifts, you can order the exact repair kit from these pages. The parts catalog cross‑references the cylinder assembly down to the O‑ring, so you don’t end up with a mismatch.

SECTION 230 – Body Hoist System: Hydraulic Cylinder Components

Hoist cylinders take a beating. This section breaks down the body hoist system – pump, control valve, lines, and the main lift cylinder. Each component is illustrated with callouts showing the part number and quantity. If you have a slow lift or a cylinder that won’t hold, this is where you find the correct replacement parts. Don’t rely on a generic “hoist kit” that may or may not fit.

How This Parts Catalog Differs from a Service Manual

Let’s get this straight: a parts catalog does not give you torque specs, repair procedures, or diagnostic steps. That’s what a service manual is for. This book is for ordering parts. You get exploded‑view illustrations, part numbers, and quantities. If you need the tightening sequence for a cylinder head or the hydraulic pressure settings, you want the Terex TR35 Service Manual – OEM Factory Specs for Tier 3 Dump Truck”>Terex TR35 Service Manual. I recommend owning both.

Who Needs This TR35 Parts Catalog?

Home‑garage guys who maintain their own dump truck, fleet mechanics, or anyone who buys used equipment and needs to rebuild it correctly. The 2006 edition covers early Tier 3 models – if your machine falls outside the serial range T8771011 and above, you need a different edition. Check the serial plate before you buy. This catalog also pairs well with the TEREX TR35 2006 Parts Catalog”>TEREX TR35 2006 Parts Catalog (the same book) if you want a second copy for the shop. For later models, see the Terex TR35 2008 Parts Catalog – OEM Factory Manual 358 Pages”>Terex TR35 2008 Parts Catalog.

Source Authenticity – OEM vs. Aftermarket

Aftermarket parts catalogs are compiled from multiple sources, often with typos or superseded numbers. This is a factory‑issued Terex document – publication number 15503212, dated August 2006. The warranty statement on page 3 confirms it’s the real thing. When you access a PDF from AutoRepairManuals, you get the exact same content Terex sent to dealers. No photocopies, no scans with missing pages.

One more thing: the cylinder listings in this book are illustrated with original Terex drawings. If you’re rebuilding a steering cylinder, the sub‑section 0120 exploded view shows every component. You order the part number, it arrives, it fits. That’s the value of an OEM catalog.

If you want to understand how these machines fit into the broader Automotive Industry Overview, that’s fine, but for the TR35, stick with the factory data. The Automotive Industry Overview”>Automotive Industry Overview won’t help you find a steering cylinder seal.

Frequently Asked Questions

Can I use this 2006 Parts Catalog to find torque specs?

No. This is a parts catalog, not a service manual. Torque values are in the service manual. Order the Terex TR35 Service Manual separately.

What’s the difference between this 2006 edition and a later version?

The 2006 edition covers serial numbers T8771011 and above for the TR35 with Cummins QSM11 Tier 3 and Allison 4500 ORS transmission. Later editions may include updated part numbers for superseded components, add revised illustrations, or cover newer machine configurations. If your machine falls outside this serial number range, you need the correct edition for your VIN. Using a wrong catalog can lead to ordering parts that don’t fit, costing hours and dollars. Always verify serial number coverage before buying.

You’ve got 422 pages of factory part numbers waiting. Stop cross‑referencing scrapped lists. Access the Factory Manual and start ordering parts that fit the first time.