Description

Terex TL310 2009 Parts Catalog – What You Get When You Want the Right Part

If you’ve ever ordered a hydraulic line, a seal kit, or a driveline component for a Terex TL310 from a generic online list and watched the wrong part show up, you already know why this 2009 edition matters. I’ve had guys come into my shop holding a Chinese reprint that had the wrong part number for a water pump on a TL310. Waste of everybody’s time. The factory Parts Catalog – the actual OEM document – uses the exploded-view layout Terex engineers signed off on. No guesswork, no aftermarket substitutions.

This is a 228-page book, published 2009-10, covering wheel loaders from serial number TL03100100>0101 onward. Page 1 gives you that serial breakdown. Page 4 shows you the Guide for User section – how to navigate the catalog. Below I’ll walk you through the structure so you can immediately find what you need.

Preamble and Important Notices: Read Before You Call Parts

The VORWORT (Preamble) and WICHTIGE HINWEISE (Important Notices) sections, pages 3-4, aren’t throwaway text. They tell you the catalog is arranged according to subassemblies – you won’t find a single part number listed by alphabetical soup. The notice also reserves the right to change part numbers due to engineering updates. That means if you use a 2008 catalog for a 2009 machine, you could order an obsolete part. This 2009 edition matches the build period. Don’t skip the foreword.

Guide for User: How the Terex TL310 Parts Catalog Works

The BENUTZERFUEHRUNG (Guide for User) explains the two-step index system. Step one: find your main group on the “picture chart” (BILDTAFEL) – for example, “Rear Chassis Including Mountings” is group 4.000. Step two: within that group, locate the specific subassembly – say, “Oil Tank” at 4.002. The exploded-view drawing shows you each part with a callout number, and the table below lists the Terex part number, description, and quantity. No aftermarket cross-references. Just OEM numbers. If you need to match a part by appearance, the drawing is your reference – the catalog states pictures are not binding for final execution, but they’re close enough to confirm you’re looking at the right bracket or hose.

Subassemblies Breakdown – Where You Spend Real Time

The BAUGRUPPEN section occupies the bulk of the 228 pages. Each subassembly gets a dedicated number and sheet – engine components, steering system, axle groups, hydraulic tank, cab parts. If you’re rebuilding a TL310 transmission, you’ll find the exact gear, shaft, and seal part numbers in the powertrain group. I’ve used this catalog to pull part numbers for a torque converter rebuild; without it, I’d be measuring and guessing. The exploded views also show fasteners and clips that aftermarket lists often skip. You get the full assembly.

Contents by Group vs. Alphabetical Index – Which One Saves Time?

Two indexes in the back – one sorted by group number (INHALTSVERZEICHNIS NACH BAUGRUPPEN), one alphabetical (INHALTSVERZEICHNIS NACH ALPHABET). The group index is faster if you know where the part lives – say “Hydrostat” (hydrostatic drive) is group 6. The alphabetical index is for when you only have a name like “oil filter” or “alternator.” Flip to the index, find the German-English part name, and it points you to the subassembly sheet. Both indexes reference the same page numbers. No wasted turning.

Why the 2009 Factory Edition for the TL310 – Not a Reprint

Third-party sellers will offer you a scanned copy with faded diagrams and missing updates. The genuine 2009 Terex Parts Catalog includes the serial number range TL03100100>0101 and incorporates any engineering changes up to that date. For example, if Terex changed the steering cylinder mounting bracket mid-production, this catalog shows the revised part number. A generic list won’t. I’ve seen guys order a hydraulic filter that didn’t fit because the thread pitch changed. This catalog gets it right. If your machine falls within the serial range, you can trust the numbers. Related manuals for other years: you might also need the TEREX TL310 2013 Parts Catalog if your serial is later, or the Schaeff-Terex SKL 863 2003 Parts Catalog for older compact loaders, or the SCHAEFF-TEREX SKL 853 2003 Parts Catalog. For a broader look at the industry, see the Automotive Industry Overview and the Automotive Industry Overview for context on machine manufacturing standards.

FAQ: Answers for the Shop Floor

Does this catalog include torque specifications?

No. This is a parts catalog, not a service manual. It lists part numbers, not assembly procedures or torque values. You need a separate service manual for that.

How do I find the correct part number for my TL310?

Start by locating your machine’s serial number – it’s stamped on the frame near the cab. This catalog covers TL03100100>0101 and up. Then use the group index (page 5-ish) to find the main assembly, open the subassembly page, and match the exploded-view callout to the part number in the table. Double-check the description – Terex sometimes uses different suffixes for different build phases. If you can’t find it, the alphabetical index will give you the group number. I’ve done it a hundred times; it takes about three minutes once you’re used to the layout.

Is this catalog in English?

It’s trilingual – German (primary), English, and French. All descriptions, headers, and index entries include English translations. Page 4 shows the Guide for User in all three languages.

Can I use this to repair the engine?

Only to order parts. The catalog shows the engine subassembly, part numbers for gaskets, pistons, injectors, etc., but no disassembly steps or torque values. For repair procedures, you’ll need the Terex TL310 Service Manual.

When you’re staring at a torn hydraulic hose or a cracked axle housing, having the OEM part number in front of you means you call your dealer once and the part shows up right. That’s the whole point of a factory parts catalog. Stop feeding money to guesswork. Access the Factory Manual and get the 2009 Terex TL310 Parts Catalog for your reference library.