Description

Terex TA35 G7 2007 Parts Catalog – Factory OEM 412 Pages

I’ve been turning wrenches since before most of you were born. 28 years, ASE Master, own a 6-bay shop in San Antonio. I’ve seen too many guys waste a week waiting for the wrong part because they used a third-party parts catalog or guessed from a blurry photo. This Terex TA35 G7 2007 Parts Catalog is the real deal – 412 pages of factory-issued part numbers, exploded diagrams, and index codes that match the machine’s serial number range. If you’re working on a TA35 G7 (OCDB) Articulated Truck with Detroit Diesel 450HP Series 60 engine and Allison 4500 ORS_R trans, this is the book you need.

SECTION 100 – CHASSIS: What the 412 Pages Cover

The Parts Catalog splits into Major Sections. Section 100 covers the chassis – frame rails, crossmembers, mounting brackets, and all the hardware that holds this machine together. Every bolt, bushing, and bracket has a factory part number indexed to the exploded drawing. You trace the diagram, note the index code (e.g., 100-1-1), flip to the parts list, and get the exact number. No guessing. The 2007 publication date means it covers the production run starting at serial A9461011 and above. If your machine falls in that range, these numbers are correct.

SECTION 140 – FRONT AXLE GROUP: Diagrams That Save You Money

Front axle work on an articulated truck gets expensive real fast. The wrong kingpin bushing or seal can cost you a day of downtime. Section 140 breaks down the front axle group – steering knuckles, kingpins, bearings, seals, and the differential housing. The exploded view shows every component in its installed position. Cross-reference the part number against what you have in hand before you order. For more parts catalogs on similar equipment, check out Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual and Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages.

SECTION 230 – BODY HOIST SYSTEM: Hydraulic Parts Identification

Body hoist problems are a pain to diagnose if you don’t have the right part numbers. Section 230 covers the hoist cylinders, control valves, hoses, and mounting pins. The catalog lists O-ring sizes, seal kits, and cylinder repair parts. When you’re under a raised dump body, you want to be sure the replacement parts match the factory spec. This catalog gives you that confidence. Also see Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual for the smaller models.

Source Authenticity: Factory-Only Numbers

Aftermarket parts catalogs often renumber or skip supersessions. Terex Equipment Limited published this original Parts Catalog in October 2007 with a June 2008 revision. The warranty page (page 3) confirms it’s an official Terex document. The index codes – like those in Section 100, 140, 230 – are the same codes the dealer uses. If you walk into a Terex parts counter with this book, you’ll get the right part. Period. For broader context on why OEM documentation matters, see Automotive Industry Overview and Automotive Industry Overview.

Audience Fit: Who Needs This 412-Page Parts Catalog?

If you’re a shop owner or a fleet mechanic who touches a TA35 G7, you need this. DIY owner-operators who maintain their own truck will save the cost of the manual on the first order. The book is 412 pages, so it’s not a quick reference – it’s a complete parts library. Every section from the tractor table of contents to the trailer optional table of contents is included. The main library index lets you jump between tractor and trailer sections fast. Beginners should pair this with a service manual; this catalog only gives you part numbers, not repair procedures.

FAQ

Does this catalog include torque specs or repair instructions?

No. This is a parts catalog, not a service manual. It lists part numbers and diagrams only.

How do I interpret the index codes on each page?

The index code printed at the top left of each page has three numbers: the first is the Major Section (e.g., 100 for Chassis), the second is the Sub-section within that section, and the last is the model PLI number. For example, 100-1-2 means Section 100, Sub-section 1, PLI number 2. Only the sections that apply to your specific model are included. Use the indexed diagram to find the part, then match the index code to the parts list on that page to get the correct factory part number. This system is used throughout the entire 412-page catalog, from the tractor sections to the trailer sections.

Stop wasting time on wrong parts and cross-referencing mismatched numbers. This is the factory document that Terex dealers use. Get the right part the first time. Access the Factory Manual now.