Description

Terex Schaeff HR 1.6 2006 Parts Catalog

If you are ordering parts for a Terex Schaeff HR 1.6 2006 Parts Catalog without the right reference, you waste time and money on wrong-fit components. This is the OEM publication from Terex|Schaeff GmbH, Langenburg, Germany – 294 pages of exploded diagrams and part numbers organized by subassembly. Skip aftermarket cross-references that guess at supersessions. This catalog tells you exactly what bolt number goes where.

Page 4 contains the BENUTZERFUEHRUNG / GUIDE FOR USER section. It explains the two-step lookup: first pick a main group (like “UPPERCARRIAGE INCLUDING MOUNTINGS”), then drill into the subassembly (example: “OIL TANK” under group 2.000). The illustrations show the parts in position – note the disclaimer that the pictures are not binding for final execution due to ongoing engineering updates. You need the serial number range (valid from 01600R/0100>) to cross-check your machine.

Another section worth reading is the WICHTIGE HINWEISE / IMPORTANT NOTICE on the same page. It covers that the catalog reflects the state at publication (2006-01) and that Terex|Schaeff reserves the right to changes. If your HR 1.6 has been updated with later series parts, you may need to check with the service department. The catalog includes three language columns – German, English, French – so the part numbers are unambiguous across any shop floor.

294 Pages of Factory Part Numbers

Every page is sourced from Terex|Schaeff itself. You get the factory item numbers, not aftermarket reprints that blur illustrations or drop supersessions. The catalog covers the entire crawler excavator: undercarriage, upper carriage, hydraulic tank, boom, arm, bucket, controls, engine bay, and electrical. If you need a seal kit for a drive motor or a control valve spool, the number is here next to the drawing.

Read the Guide for User Section First

Do not skip page 3-4. The BENUTZERFUEHRUNG teaches you the hierarchy: main groups (e.g., 2.000 OBERWAGEN MIT AUFBAUTEN) and subassemblies (e.g., 2.002 OIL TANK). You locate your part in the illustration, note the reference number, then cross to the parts list. Each list includes the item number, part number, description, and quantity per assembly. Without this method, you end up flipping through 294 pages blind.

Main Groups and Subassemblies – Navigation

The catalog uses a logical index. 0.004 INHALTSVERZEICHNIS NACH BAUGRUPPEN lists contents by group number. 0.005 INHALTSVERZEICHNIS NACH ALPHABET gives an alphabetical index for name-based lookup – useful if you know the German or English name but not the group. For example, look up “oil tank” in the alphabetical index and it points you to group 2.002.

OEM vs Aftermarket: Why Factory Catalogs Win

Aftermarket parts catalogs often renumber or omit supersession history. A part that was updated in 2007 may still show the old number. This 2006 edition is the official Terex|Schaeff release – the same one dealers use. The part numbers are printed exactly as they appear on the factory bins. For an industry overview of documentation standards, see Automotive Industry Overview.

For related equipment, consider Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual and Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages or Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual. Those cover skid steer loaders but follow the same factory indexing.

Important Notice: Modifications and Binding Illustrations

Page 3 carries the WICHTIGE HINWEISE. It states that illustrations are not binding for the final execution – Terez|Schaeff may have made design changes after printing. Always verify your serial number matches the valid-from range (01600R/0100>). If your machine falls outside that range, the part number may have been superseded. Contact the service department at Rothenburg or Langenburg – addresses are listed on page 3.

FAQ

Does this catalog include torque specs or repair procedures?

No. This is a parts catalog, not a service manual.

How do I look up a part if I only have a German name?

Use the alphabetical index (0.005) which lists part names in German, English, and French. Find the subassembly group number, then turn to that group’s pages. Each group starts with an exploded view page showing numbered callouts; the corresponding parts list below gives the factory part number and quantity. The index is arranged alphabetically within each language, so searching “Öltank” or “oil tank” both work.

Stop wasting money on parts that don’t fit. Access the Factory Manual from AutoRepairManuals and keep your HR 1.6 running with correct OEM components.