Description

Terex PT-50 2010 Parts Catalog

You order a replacement hydraulic hose for a PT-50 compact track loader, wait three days, and it’s the wrong fitting. Dealer says “sorry, you gave me the wrong serial number range.” That’s the price of using a third-party parts catalog. The Terex PT-50 2010 Parts Catalog from AutoRepairManuals fixes that. It’s the same 30-page factory document Terex printed in 2010, part number 0200-680. No reprints, no aftermarket interpretation.

21 Assembly Sections – Cab to Track Tool

This catalog breaks the machine into 21 exploded-view assemblies. Section 1 covers the Cab (R.O.P.S.) for serial DTC 03056-Current. Section 21 shows the Track Installation Tool. You get every nut, bolt, seal, and harness split by serial number. Need the hood latch parts? Section 5-A. Radiator or oil cooler? Section 6-A. Each section starts with an illustration and lists the part number directly below the callout. You don’t guess – you read the number and order.

Serial Number Splits: Why DTC 03056 Matters

Terex changed the chassis and undercarriage design between serial 03056-03132 and 03133-Current. If you order a chassis assembly for a machine built in 2012 but look at the pre-03133 section, the part won’t fit. The manual shows both – 4-A and 4-B. Same for the left and right undercarriage, sections 13 and 14. You have to match your machine’s Dtc prefix and serial range to the section. Ignore that and you’ll be making another phone call.

What Lubricants and Filters Are Specified?

Page 3 lists the General Service Items: Perkins engine oil filter, Donaldson primary and secondary air filters (P822768 and P822769), fuel filter, water separator o-ring, Gates fan belts. The coolant spec is ethylene glycol long life. Grease comes in tubes or cases. You also get the hydraulic service items – fluids and filter part numbers. If you’re stocking a shop or doing a full PM, this page alone saves time hunting cross-references.

Cylinder Service Items: Seal Kits and Rods

Two serial splits exist for cylinder service. For DTC 03056-03133, the manual lists separate seal kits for the bucket/tilt cylinder and the lift arm cylinder, plus rods, end glands, and nuts. For DTC 03133-Current, the same components but different part numbers. You need the right rod or gland? The catalog includes them all. I’ve seen guys try to rebuild a cylinder with a kit from a different serial – seal dimensions change. Don’t do it.

Aftermarket Catalogs vs. This OEM Print

Aftermarket parts catalogs for compact loaders often consolidate multiple years into one generic drawing. They miss the subtle changes – like the torsion axle assembly (Section 12) that only fits DTC 03056-Current, or the optional heater/A/C assembly (Section 20). This Terex factory document is the only source that matches every single part number to your specific build date. If you’re a professional mechanic or a serious owner, you don’t have time for “close enough.” TEREX PT-50 Master Part Manual covers the full machine, and for service procedures you’ll want TEREX PT-50 PT-60 Service Manual or the TEREX PT-50 PT-60 2009 Service Manual if you need earlier variations. For a broader look at how OEM documentation fits into the Automotive Industry Overview, see Automotive Industry Overview for context on why factory specs matter.

FAQ

Does this catalog include engine overhaul parts?

No. It covers the engine assembly (Section 10) as an assembled unit with part numbers for the complete engine, not individual pistons or rings. For internal engine components, you need the service manual.

What serial numbers are covered?

DTC 03056 through Current, with multiple split points (e.g., 03056-03132, 03133-Current).

How many pages is the manual?

30 pages total, including the general service items and lubricants table.

Is this an original OEM document or a reprint?

It is a direct digital copy of the factory-printed Terex Master Part Manual PN 0200-680, scanned from the original 2010 release. No third-party modifications.

Stop chasing wrong parts and dealing with returns. Access the Factory Manual from AutoRepairManuals and get the exact Terex PT-50 2010 parts catalog that matches your machine’s serial number. It’s 30 pages, factory-correct, and ready to print or reference on a tablet. Order yours today.