Description

Terex PT-100 G 2010 Parts Catalog – Factory OEM Part Numbers

If you are wrenching on a Terex PT-100 G compact track loader, you need the factory part numbers. I have seen too many guys order the wrong hydraulic hose because they relied on a generic cross-reference. This Terex PT-100 G 2010 Parts Catalog from Terex gives you the official exploded views and OEM numbers for every assembly. The manual is only 34 pages, but each page is packed with exactly what you need to identify and order the correct part. No guessing if the Fuel filter you are holding matches the original – page 7-A shows the Fuel Tank Assembly with the part number right next to the component.

Fuel Tank Assembly and Engine Components – What the Catalog Covers

Section 7 takes you straight to the Fuel Tank Assembly with serial numbers DTM 00101-Current. You get the tank, cap, sending unit, and lines all laid out. Engine Assembly section 15 covers the block, mounts, and accessories. Intake and exhaust assemblies are section 16. If you need a fan belt or a water separator, those part numbers are in the General Service Items & Lubricants table starting on page 3. That page lists the fuel filter and fuel/water separator filter by OEM number. No aftermarket guesswork.

Why Use an OEM Parts Catalog Instead of Aftermarket?

I have tested third-party parts lists against this manual. The differences can bite you – wrong thread pitch on a hydraulic fitting or a bracket that does not line up. Terex prints this catalog for the PT-100 G using their own engineering drawings. Aftermarket indexes copy numbers but miss revisions. This 34-page document is the reference that Terex dealerships use. If you want the part that actually fits, this is it.

29 Sections of Factory Part Numbers

Twenty-nine sections, each tied to a serial number range. Starting with the Cab (R.O.P.S.) Assembly on page 1-A, then Cab Interior, Headliner/Dash Pods, Windshield Wiper (optional), Chassis Assembly, Fuel Tank, Hood, Radiator/Oil Cooler, Hydraulic Reservoir, Hydraulic Control, Lift Arm Control Valve, Hydraulic Drive/Auxiliary, Solenoid Blocks, Engine, Intake/Exhaust, Fuse Panel, Torsion Axle, both sides of Undercarriage (RT and LT), Drive Table Assemblies, Lift Arm, Lift Arm Tubes, two Quick Attach options, Air Conditioning/Heating, Cab Heater, and the AC/Heating Unit. Every major assembly is covered.

Hydraulic System Parts: From Reservoir to Drive Table

The hydraulic system gets its own sections for reservoir, control assembly, lift arm control valve, drive/auxiliary assembly, and solenoid blocks. If you need a specific o-ring for a drive motor or a replacement valve spool, the exploded view shows the relationship. Section 13 (Hydraulic Drive/Auxiliary Assembly) is where you find the pump and motor part numbers. Do not assume the local supply house has the right seal kit – order against the OEM number.

General Service Items and Lubricants – Don’t Miss This Section

Page 3 is a quick reference table for maintenance parts: engine oil filter, primary and secondary air filters, fuel filter, fuel/water separator filter, fan belt, A/C belt, and antifreeze/coolant in 1-gallon size. Also listed are hydraulic service items and lubricants specific to the PT-100G. Keep this page laminated in your toolbox – saves you the trip to the parts counter with a dirty filter in hand.

Does this parts catalog include torque specifications?

No. This is a parts catalog, not a service manual. It only lists part numbers.

What serial numbers does this manual cover?

It covers machines with serial number DTM 00101-Current, meaning from the start of production up to the manual’s print date (6-10). Always verify your machine’s serial plate before ordering.

Can I use this manual for other Terex models?

I would not recommend it. The PT-100 G has specific hydraulic and drivetrain components that differ from the PT-30 or SKL series. The Automotive Industry Overview shows how manufacturers reuse platforms, but Terex changes part numbers between models. For example, the fuel tank on the PT-100 G is unique. Stick to your exact machine. If you need a related model, check the Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual or the Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages and Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual for those machines.

Is this a printed book or a PDF?

You are purchasing a digital access. It is the exact PDF file from Terex with all 34 pages, searchable and printable.

Stop ordering wrong parts and burning billable hours. Automotive Industry Overview may talk about trends, but when you need the right filter or gasket, you need the factory document. Access the Factory Manual now and keep it on your tablet next to the loader.