Description

Terex HR 16 2006 Parts Catalog – OEM Factory Parts Manual

The Terex HR 16 2006 Parts Catalog is the only reference you should trust when ordering parts for this crawler excavator. I’ve seen guys order a hydraulic filter for the wrong serial number range and lose a whole day. This 270-page document from Terex GmbH gives you the OEM breakdown with exploded views and part numbers keyed to your machine’s build. Skip the aftermarket cross-references; they’ll mislead you.

270 pages of factory data means every bolt, seal, and hose has a specific part number. No guesswork. The catalog is organized by main groups and subassemblies – you follow the ‘Bildtafel’ (illustration plate) to find your section, then locate the exact part in the exploded diagram. Page 1 shows the serial number validity range (000358/4036 and above). If your machine falls outside that, you need a different edition.

Organization is key when you’re under time pressure. The catalog includes three search tools: a table of contents by group (0.004), an alphabetic index (0.005) in three languages, and a ‘Guide for User’ section (0.001) explaining the structure. Use the alphabetic index if you only know the part name – it cross-references to the subassembly group. This catalog covers the HR 16 model only; for the SKL series, see the Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual or the Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages.

Important notice on page 3: the illustrations are not binding for final execution. Terex reserves the right to make modifications due to technical evolution. That means if you’re looking at a drawing and the part doesn’t match your serial number exactly, verify with the part number listing. Don’t assume the picture is 100% accurate – use the numerical index.

3 Reasons Factory OEM Beats Aftermarket Parts Lists

Aftermarket parts catalogs often combine multiple model years or omit superseded part numbers, leading you to order a part that looks right but doesn’t fit. This factory catalog from Terex is printed specifically for the 2006 edition with a defined serial number cutoff (000358/4036 and above). Each part number is original OEM – you won’t find ‘compatible with’ or ‘replaces’ – you get the exact number Terex stamped on the casting. For a machine like the HR 16, ordering the wrong track tensioner spring, hydraulic pump seal, or final drive clutch can cost you a week of downtime and thousands in repairs. Stick with the source. The catalog includes 270 pages of exploded views, part number lists, and indexes in three languages. It also includes the Terex address and contact information for parts and service. This is the same document the dealership parts counter uses.

Guide for User: How This Catalog Is Organized

The ‘Guide for User’ section on page 4 explains the two-step navigation: first identify the main group (e.g., ‘Uppercarriage Including Mountings’ group 2.000), then locate the specific subassembly (e.g., ‘Oil Tank’ 2.002). The catalog is broken down by subassemblies, not by part number ranges. If you’re new to factory parts books, read the guide carefully. It saves you from flipping through all 270 pages.

Important Notice: Binding Illustrations and Revision Rights

Page 3 contains an important notice in German, French, and English: the pictures are not binding. Terex reserves the right to make modifications. That’s typical for OEM documentation – they update parts without updating every illustration. Always verify the part number against your machine’s serial number. The catalog’s serial number range is printed on the first page. If your HR 16 falls outside 000358/4036, contact Terex for the correct edition.

Does This Catalog Include Repair Procedures?

No. This is a parts catalog, not a service manual. It contains exploded diagrams and part numbers only. For torque specs, adjustment procedures, and diagnostic steps, you need the factory service repair manual. Mixing up the two documents leads to ordering parts you don’t need or skipping critical assembly steps. I keep both on the bench. Related: Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual for the SCL series.

Terex HR 16 2006 Parts Catalog: What You Get

270 pages, three-language support, exploded diagrams with callouts, part number lists, and cross-reference indexes. The catalog covers the full machine: undercarriage, uppercarriage, engine compartment, hydraulic system, attachments, and electrical components. Each subassembly has its own section. Use the alphabetic index to find parts by name. The catalog also includes the manufacturer’s address and contact details for ordering.

Does this catalog include torque specifications for assembly?

No. This is a parts catalog, not a service manual. It lists part numbers and exploded views, not torque values or repair procedures. For those, you need the service repair manual.

How do I find a part if I only know the name, not the number?

Use the alphabetic index on page 0.005. It’s a dedicated alphabetical listing of part names in English, German, and French. Cross-reference that to the subassembly group number, then locate the exploded diagram. This method saves you from flipping through every group. The catalog also includes a contents by groups index (0.004) for navigating by machine system. I’d recommend checking both indexes before ordering – it cuts down on mistakes when you’re in a hurry.

Do not guess.

Whether you’re a fleet manager keeping a HR 16 running or a DIY operator tired of ordering wrong parts, this catalog pays for itself on the first correct order. Stop cross-referencing generic numbers. Automotive Industry Overview standards aside, nothing beats the factory data. Automotive Industry Overview is just background – the real spec is here. Access the Factory Manual now and get the part numbers you can stake your reputation on.