Description

Terex HR 13 2006 Parts Catalog

If you’re sinking pilings or clearing a right-of-way, the last thing you need is a dead machine because you ordered the wrong seal kit. I’ve been wrenching on heavy equipment since the Reagan administration, and I’ll tell you flat: the Terex HR 13 2006 Parts Catalog is the only document you should trust when ordering parts for this crawler excavator. Not a third-party print. Not a photocopy of a photocopy. This is the original OEM factory publication from Terex GmbH, Langenburg, Germany.

What This Parts Catalog Actually Contains

You get 210 pages of factory-engineered part identification. The catalog covers the HR 13 from serial number 001300/0375 up to 001300/0795. It’s organized by subassemblies – exactly the way Terex built the machine. The table of contents lists 0.001 GUIDE FOR USER, 0.002 IMPORTANT NOTICE, 0.003 SUBASSEMBLIES, 0.004 CONTENTS BY GROUPS, and 0.005 ALPHABETIC INDEX. Page 1 gives you the valid serial range so you know your machine is covered. Page 4 explains how to navigate: pick a main group (like upper carriage 2.000), then drill into the subassembly (oil tank 2.002). Every exploded view has callouts with the genuine Terex part number. No cross-referencing, no guessing.

Audience Fit: Who Needs This on Their Workbench

If you own a single HR 13 or run a small fleet, this catalog pays for itself the first time you need a hydraulic cylinder repair. DIY equipment owners – I respect the work, but you cannot afford to slap a generic O-ring into a 400-bar circuit. The factory part number is the only safe option. Fleet managers: hand this to your tech and tell them to verify every part against the exploded diagram before ordering. One wrong part means a machine sitting for three days. That’s lost money you never get back.

Source Validity: Why OEM Beats Aftermarket

I’ve seen aftermarket parts catalogs with swapped digits and missing pages. This is the real deal – a 2006 Parts Catalog printed by Terex. The drawings are not binding for final execution, as noted, but the part numbers are. When a supplier says “fits HR 13” and your manual shows a different part, trust the manual. I’ve had techs bring me aftermarket catalogs that listed the wrong bolt length for the swing drive. Don’t waste time. For a broader look at how the heavy equipment industry handles documentation, check the Automotive Industry Overview on Wikipedia – the same principles apply to construction machinery. The Automotive Industry Overview also covers supply chain issues relevant to parts availability.

Practical Tips for Using This Catalog

Start with the main group illustration on the contents page. If you need an undercarriage part, go to group 3.000 and work down. Use the alphabetic index at 0.005 if you know the part name but not the group. Keep this catalog near the parts counter, not in the filing cabinet. Write the date you receive each part on the corresponding page – it helps track revisions. And always double-check the serial range: the catalog says 001300/0375 > 001300/0795. If your machine falls outside that window, you need a different edition.

Frequently Asked Questions

What serial numbers does this catalog cover?

Serial numbers 001300/0375 through 001300/0795. Check your machine’s plate before ordering.

Is this a repair manual or a parts catalog?

This is a parts catalog – exploded diagrams and OEM part numbers. It does not contain service procedures. For repair steps, you need a separate service manual. But if you’re ordering parts, this is the only document you should use.

Can I use this catalog for an HR 13 from a different production year?

Only if your serial number falls within the range 001300/0375 to 001300/0795. Terex made running changes – tracks, pumps, boom geometry all changed over time. Using the wrong catalog can land you with a pin that’s 2 mm off or a seal that won’t seat. I’ve seen it happen. Always match the serial range printed on page 1. If your machine is outside that range, look for a later edition. The 2006 catalog covers exactly the builds made between those numbers.

How are the parts organized?

By subassemblies. Start with main groups (e.g., upper carriage 2.000), then find the subgroup (oil tank 2.002). The alphabetic index at 0.005 helps if you only know the part name.

Related Manuals for Terex/Schaeff Equipment

If you work on other models in the Terex/Schaeff family, these factory catalogs will save you the same headaches:

• Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual
• Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages
• Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual

My advice: if you touch heavy equipment for a living, you need factory documentation. Don’t rely on memory or aftermarket cross-references. Access the Factory Manual from AutoRepairManuals right now – get the Terex HR 13 2006 Parts Catalog on your workbench before you order another part.