Description

Takeuchi TB035 Parts Catalog – What the Factory Uses

You are working on a Takeuchi TB035 Parts Catalog job, and you need the right part number fast. That aftermarket cross-reference site you bookmarked? It gives you three different numbers for the same hose, and none match the fitting in your hand. The machine is down. The customer is waiting. This isn’t the time for guesswork. A factory TB035 Parts Catalog with 235 pages of exploded drawings and OEM part numbers stops that problem cold. I’ve been torquing head bolts since before some of you were born, and I’ve seen more damage from wrong parts than from worn rings. Get the right number the first time – this is that catalog.

What This Parts Catalog Actually Covers

Open to any page. You get the upper half as an exploded diagram showing every bolt, seal, hose, and bracket in its real position. The lower half lists the part number, description, and quantity per machine. The manual covers serial numbers 1353001 through 1353347 – that’s the TB035 compact excavator range. It includes paint color codes for every major panel: cover, protector, counterweight, front guard (Red, paint no. 19190-60105), floor plate and levers (Gray Brown), lower machinery (Brown Gray), and engine cover/upper frame/tank/canopy (Gray). That’s not trivia – when you order a canopy or a counterweight you better have the right shade, because Takeuchi doesn’t ship touch-up paint for a different year.

Paint Codes and Color Specifications

Page 3 of the catalog has a full paint color table. It lists the part of the machine, the color name, and the factory paint number for both brush and spray. If you’re blending a repair on a TB035 front guard, you need 19190-60105 Red. Not “close enough.” Not “the guy at the counter said this matches.” The factory data is right there. I’ve had jobs where a mismatched fender cost a full day of rework because the customer refused to accept a two-tone excavator. This catalog avoids that. Automotive Industry Overview shows why consistent OEM data matters, but you can trust a manual that was printed for the assembly line.

How to Read the Parts Catalog (Yes, Read It)

Don’t skip the instructions on page 4. The catalog uses item numbers with hyphens (like *-*) that don’t appear in the diagram – those indicate a part number that also appears elsewhere without the hyphen. The catalog also defines front and rear for the machine: front is the blade side, rear is the travel equipment side. When you sit in the driver’s seat, left and right are as you face forward. That seems obvious until you order a left-side hydraulic line and get the right one because the parts guy swapped orientation. Read the legend. Then order.

Ordering Parts: The Correct Procedure

When you call Takeuchi or your dealer, you must supply: model (TB035), machine serial number, part number, part name, and quantity. The example on page 4 shows exactly how: TB035, serial 2305, part 19081-09095, “hose,” qty 2. If you leave out the serial number, the dealer can’t guarantee the supersession is correct. Don’t be the tech who orders a pin and bushing kit for a TB035 with an earlier undercarriage. The catalog lists every variation in the diagram callouts. Take ten seconds to write down your machine serial before you call. Takeuchi TB025, TB030, TB035 Workshop Manual – 362 Pages covers repair procedures, but the parts catalog is what you need to buy the parts.

Why Factory Parts Catalog Beats Aftermarket

The aftermarket parts books I’ve seen for the TB035 are often photocopies of an older revision with incorrect superscriptions. A genuine Takeuchi parts catalog is printed from the same data that the factory uses to build the machine. The 235 pages are organized by assembly – engine cover, lower machinery, attachment – exactly as the machine was assembled. There are no “universal” hydraulic hose diagrams here. Each hose is drawn in its actual routing. If you’ve ever had a generic diagram show a straight hose when you need a 45-degree fitting, you know the difference. This is the OEM file. Takeuchi TB025, TB030, TB035 Workshop Manual – OEM Factory Data is the companion for repair work, but for ordering, this catalog is the only one to use. Takeuchi TB035 Parts Catalog – 307 Pages of Factory Specs is another option if you need an extended edition – check the page count before you buy.

Does this catalog include torque specifications?

No. This is a parts catalog, not a service manual. You need the workshop manual for torque values.

How do I identify which part number I need when the diagram shows a hyphenated number?

The “-*” numbers in the diagram mean the same part number without the hyphen appears elsewhere in the catalog. Look at the parts list below the diagram – the item number without a hyphen is the correct order number. If you still can’t match it, write down the figure reference and the item number, then call your dealer with that and your machine serial. The catalog orders parts by view sheet, so dealer parts people know exactly which page you’re on. Always double-check the serial number range – the TB035 catalog covers 1353001–1353347. Outside that range you may need a different revision.

The Takeuchi TB035 is a common compact excavator in North American rental fleets and private sites. When a customer brings in a machine under 10,000 hours, the parts you replace should be exactly what came from the factory. One wrong o-ring in the final drive circuit means a $2,000 redo. This 235-page catalog eliminates that risk. You get the paint codes, the exploded views, the exact part numbers, and a clear ordering procedure. Stop trying to make an aftermarket number work. Access the Factory Manual now – it’s the only one with Takeuchi’s own data.