Description

Shibaura S325, S330 1997 Parts Catalog – Factory OEM Specs

If you’re pulling apart a Shibaura S325 or S330 and you hit a wall because the aftermarket parts list shows a gasket that’s two bolt holes off, I’ve been that guy. The fix is simple: grab the 1997 Parts Catalog – the one that came out of the Ishikawajima-Shibaura factory binder with the part numbers that actually match what’s on your tractor. This isn’t a reprint or a scan of a scan. This is the original OEM binder, 322 pages of exploded views, code numbers, and part references. No translation errors, no guessing.

Cylinder Block and Oil Pan – Page 2-3

The Cylinder block section (chapter 03) gives you the exact part numbers for the block itself, the oil pan, the main bearing caps, and every bolt that holds the bottom end together. These engines are tough, but if you order the wrong oil pan gasket, you’ll be chasing a leak for months. The manual lists the code numbers for the S325 and S330 separately. Page 2-3 shows the exploded view with callouts. I’ve seen guys try to fudge it – don’t. Use the factory diagram.

Crankshaft and Piston Assembly – Page 2-9

Chapter 05 covers the Crankshaft & piston group. If you’re rebuilding the rotating assembly, you need the rod bearing part numbers and the piston ring set references. This page lists the crankshaft, connecting rods, pistons, and all associated hardware – with the OEM codes that match the binder. The aftermarket catalogs I’ve seen leave out the thrust washer thickness variations. The factory manual doesn’t. Get it right the first time.

Transmission and Drivetrain: 51 Exploded-View Sections

This Parts Catalog covers the clutch, mission case, HST assembly, front axles (2WD and 4WD for both S325 and S330), differential, PTO, creep transmission – everything from chapter 21 through 51. Each section is split by model and configuration. For example, chapter 29 is the clutch case for S325 HST, chapter 30 is for S330 HST. If you’re swapping a transmission on a S330 (2×4), you’ll find the main transmission in chapter 40. The manual also includes the code number index at the back – about 600+ part codes cross-referenced to the page where the exploded view lives. That’s the kind of detail that saves you from buying a 2WD brake pedal when you need 4WD.

Why Factory Parts Catalogs Beat Aftermarket Reproductions

I’ve burned hours cross-referencing numbers from third-party sites, only to find out the part was superseded or the illustration was for a different serial number range. Shibaura’s own 1997 binder doesn’t have that problem. The part numbers are direct from the Japanese factory – printed by Ishikawajima-Shibaura Machinery Co., Ltd. There’s no translation drift. The code numbers (like 398110100 for a front axle component on page 57) are exactly what Shibaura used on the assembly line. You can order from any dealer with confidence if you hand them the code from this manual. For a deep dive on diesel engine architecture, check out this Wikipedia article on diesel engines – but when it comes to finding the right part, stick to the factory document.

Who Needs This Manual?

If you own a Shibaura S325 or S330 compact tractor – whether it’s a gear-drive model, an HST, 2WD or 4WD – this parts catalog is the only reference you should trust for ordering replacements. It covers every engine group (radiator hoses, cylinder head, injection pump, alternator, starter) and every chassis/body group (front axles, steering, clutch, transmissions, differentials). Even if you’re a home garage enthusiast who doesn’t rebuild engines every day, having the exploded views in front of you keeps you from mixing up the 2WD and 4WD steering linkage (chapter 23 vs 24). Shop owners: hand this to your technician before he starts a transmission job on a S330 HST. It’ll cut his parts-ordering time by half.

Frequently Asked Questions

Does this manual include torque specifications?

No. This is a parts catalog, not a service manual. It lists part numbers and exploded views, but not torque values. You’ll need the separate service manual for that.

Will this work for a S330 SSS transmission?

Yes. Chapter 37 covers the mission case and shift for S330 SSS, and chapter 41 covers the main transmission for S330 SSS. The part codes are specific to that variant.

How are the part numbers structured?

Each part has a 9-digit code (e.g., 398110100). The code number index at the back (pages 57-88, approximately) maps those codes to the page where the part appears in the exploded view. You can look up a part by code or by the assembly diagram.

Is this the same as the binder that came with the tractor?

Yes. This is an exact digital copy of the OEM binder printed in October 1997. The binder number is BSP3008, parts list code 300830451. No aftermarket summaries or condensed versions.

Stop ordering parts that don’t fit. If you’ve got a S325 or S330 sitting in your shop with the cylinder head off or the transmission spread across the bench, you need the factory part numbers in front of you. This binder has them – every code, every callout, for both models. Access the Factory Manual from AutoRepairManuals and get back to work with the right parts.

• Related Manuals:
  Shibaura SX21 SX24 Parts Catalog | OEM Part Numbers
  Shibaura ST440, ST445 2003 Parts Catalog – OEM Factory Part Numbers
  Shibaura ST329, ST333 2002 Parts Catalog – OEM Factory Specs

For general engine theory, see this Wikipedia article on diesel engines.