Description

Schäffer 38, 46 2006 Parts Catalog – OEM Factory Spare Parts List

I’ve lost count of how many times a junior tech brought me a wrong part because they guessed the number off a worn casting. That’s exactly why you need the Schäffer 38, 46 2006 Parts Catalog. This is the original factory print from September 2006 — not a third-party reprint, not a scanned copy that lost half the resolution. It’s the same binder that dealers pull off the shelf. 171 pages of exploded diagrams and part numbers for the Schäffer 38 and 46 loaders. No guesswork. If you want to fix that leaky steering cylinder or replace a cracked engine cover, this is where you start.

What a Factory Parts Catalog Actually Contains

Open the catalog and you find every assembly broken down into numbered diagrams. Steering cylinder (E1), lift cylinder (E2), tool cylinder (E4) — each section shows the individual components with corresponding part numbers. The table of contents on page 4 lists all chapters: front axle with and without differential interlock, rear axle variants, braking system, engine mounting, fuel system, exhaust, and even adhesive labels. If it’s bolted onto a Schäffer 38 or 46 loader, it’s in here.

The Difference Between OEM and Aftermarket Catalogs

Aftermarket parts catalogs often list superseded numbers that don’t match your machine’s serial range. Worse, they omit entire sections like optional equipment. This Schäffer catalog includes the factory chapters for optional features: S8.1 tandem pump, S16.1 ROPS safety roll bar, S18.1 EU-WS tool holder, and more. The part numbers here are the ones Schäffer stamped on the original components. If you’ve ever ordered a cylinder seal kit only to find it’s the wrong bore diameter, you understand why OEM accuracy matters.

3 Reasons to Use This Manual Instead of a PDF From a Forum

First, the diagrams are full resolution with correct callout lines — no blurry photocopies that leave you guessing which part is which. Second, the catalog covers both model 38 and model 46, with separate listings where parts differ (e.g., axle assemblies E27.1 vs E27.3). Third, it includes optional equipment sections that online PDFs always cut off: S18.4 tool holder locking device, K1.6 heating system, V1.3 hardtop upgrade kits. You get the whole 171-page document.

Does This Manual Cover the Engine and Cylinders?

Yes. Chapter E22 covers engine mounting and clutch components — part numbers for the brackets, bushings, and fasteners. The fuel system (E23), exhaust (E24), air cleaner (E25), and water/oil radiator (E26) are all there. For cylinders, the catalog lists the steering cylinder (E1), lift cylinder (E2), and tool cylinder (E4) with complete seal kits and rod assemblies. This isn’t a repair manual — it won’t tell you how to rebuild the cylinder. But it tells you exactly which part number to order for a replacement.

How to Order the Correct Parts Using This Catalog

Start by identifying the assembly you need — say the lift cylinder on your 46. Flip to chapter E2, find the exploded diagram, and locate the part number printed next to the cylinder body. Cross-check that number against the parts list table below the diagram. The catalog uses the same numbering system as Schäffer’s factory, so you can hand that number to any dealer and get the right part. No need to pull the cylinder and measure bores or guess from old invoices. The industry overview of Automotive Industry Overview consistency is built into this document.

For related loader models, check the Schäffer D905-E2B-EU-XL1 Parts Catalog – OEM Factory Spare Parts List and the Schäffer 3033(S)/3026 Parts List Manual for older machines. The Schäffer 4042 / 4048(S) Spare Parts List covers the next size up.

Audience: Who Needs This?

If you own a Schäffer 38 or 46 loader and do your own maintenance or repairs, this catalog pays for itself on the first mistake it prevents. Small construction companies, farm shops, and equipment dealers keep a copy on the bench. Real-world example: a farmer with a 2006 38 loader needs a new steering cylinder. Without the catalog, he either hauls the old one to a dealer (time and travel) or orders from memory (30% chance wrong). With page E1, he gets the exact Schäffer part number, orders online, and has it in two days. That’s the difference between an hour and a day of downtime.

The Automotive Industry Overview reinforces how critical OEM documentation is for machine longevity.

Frequently Asked Questions

Is this manual in English?

Yes, the catalog is bilingual German/English with both languages listed for each chapter.

Does it include torque specs?

No, this is a parts catalog only. Torque values belong in the service manual. Here you get only part numbers and explosion diagrams.

Can I use it for a Schäffer 46?

Yes, the catalog covers both models 38 and 46. Where components differ (axles, cylinders), each model has its own section or a note in the parts list. Always verify the model number in the chapter header.

How do I know if my loader has a differential interlock?

Look at the front axle chapter. Without interlock is E27.1, with is E27.3. The catalog shows both variants. Also check the rear axle: E28.1 without, E28.3 with. If you’re unsure, remove the axle cover and look for the interlock actuator — the catalog diagram will confirm.

Stop chasing part numbers from worn tags or guessing from online forums. Access the Factory Manual and get the exact numbers Schäffer intended.