Description

Schaeff-terex HR 13 2006 Parts Catalog

If you are wrenching on a Schaeff-terex HR 13 crawler excavator and you need the exact part number to keep the machine running, this is the document you want on your bench. Not a reprint. Not a scan from a third-party. This is the factory-issued Parts Catalog from 2006, the same one the dealer techs use. 241 pages, broken down by subassemblies, with exploded diagrams and part numbers that match the machine sitting in your shop.

I have seen guys order the wrong hydraulic filter three times because they guessed from a generic cross-reference. That costs time and money. This catalog eliminates that. You look up your serial number range (this copy covers 1300/0100 through 1300/0374), find the group, and order the correct Schaeff-terex part. Period.

Guide for User – How This Catalog Is Organized

The first section – BENUTZERFUEHRUNG / GUIDE FOR USER – explains exactly how to navigate. The manual is grouped by “Hauptgruppen” (main groups) and “Baugruppen” (subassemblies). For example, if you need an oil tank, you go to main group 2.000 “Uppercarriage Including Mountings” then subassembly 2.002 “Oil Tank”. Every illustration shows the exploded view with callouts. No interpretation required.

That system works. Use it. Do not flip to the back and guess. The table of contents is on pages 4 and 5 of the PDF – start there.

Important Notice – Read This Before You Order Parts

Page 1 of the catalog contains a “WICHTIGE HINWEISE / IMPORTANT NOTICE” section. It states that illustrations are not binding for final execution – Schaeff-terex reserves the right to make design changes. Translation: if your machine has a serial number outside the range listed (1300/0100 – 0374), double-check with your local dealer before ordering. The 2006 edition is valid for those machines only.

Also note the document is trilingual: German, French, English. The part numbers and group numbers are the same in all languages. Do not panic if you see “BENUTZERFUEHRUNG” – it means “Guide for User.”

7 Subassembly Groups Cover the Entire Machine

The catalog is broken into subassemblies (BAUGRUPPEN). You get seven major group numbers (0.003 in the TOC) that cover everything from the undercarriage to the hydraulic system. Each group has its own exploded diagram with part numbers and quantities. No blurry low-resolution scans – this is a clean PDF from the original factory file.

I have used these catalogs to rebuild the swing drive on an HR 13. You need the planetary gear set? Group 6.xxx. Track tensioner? Group 4.xxx. The index by group (INHALTSVERZEICHNIS NACH BAUGRUPPEN) lists every subgroup. Find your group, turn to that section, and the diagram tells you what you need.

Alphabetic Index – When You Know the Part Name, Not the Number

Sometimes you walk out to the machine and see a broken hose but you do not know which group it belongs to. That is why the catalog includes an alphabetical index (INHALTSVERZEICHNIS NACH ALPHABET). Look up “hydraulic hose” or “O-ring” and it tells you which group and page to go to. The index is at the back of the catalog – use it. It saves time flipping through groups.

This is a parts catalog, not a service manual. You will not find torque specs or repair procedures here. But if you need the correct part number for a seal kit, filter, or hydraulic cylinder, this is the only source you should trust. Aftermarket catalogs mix up part numbers. Factory OEM does not.

Why the OEM Schaeff-terex HR 13 Parts Catalog Beats Aftermarket Lists

I have seen aftermarket parts websites claim to have “compatible” part numbers. They are often wrong. The only way to guarantee the right part is to look it up in the factory catalog. This document was published by Schaeff-terex GmbH & Co. KG in Langenburg, Germany. It is the same data the dealer parts counter uses. If you want to avoid returning parts and eating shipping costs, start here.

The catalog also lists the exact Schaeff-terex part number – not a generic cross-reference. When you order from a dealer, give them that number. They will not argue with a factory number. Do not rely on memory. Use the catalog.

Frequently Asked Questions

Does this parts catalog include service procedures or torque specs?

No. This is a parts catalog, not a service manual. It shows exploded views and part numbers only.

How do I find a part if I only have the machine serial number?

The catalog covers serial numbers 1300/0100 to 1300/0374. If your HR 13 is within that range, start by identifying the subassembly group from the main group illustrations on page 4. Then locate the specific subgroup (e.g., 2.002 for the oil tank) and find the part in the exploded diagram. If you know the part name but not the group, use the alphabetical index at the back of the catalog – it lists every component alphabetically and tells you which group to look under. For parts outside that serial range, confirm with Schaeff-terex before ordering.

The only way to keep a crawler excavator in the dirt instead of the shop is to put the right parts on it the first time. This factory catalog gives you the exact part numbers, diagrams, and group structure that Schaeff-terex intended. Stop relying on memory or aftermarket lists. Access the Factory Manual now and keep it on your workstation.

Related manuals you might need: Schaeff-terex SKL 863 2003 Parts Catalog – OEM Factory Manual, Schaeff-terex SKL 853 2003 Parts Catalog – Factory OEM 485 Pages, Schaeff-terex SCL 515 2002 Parts Catalog – OEM Factory Manual. For background on the equipment industry, see Automotive Industry Overview and Automotive Industry Overview.