Description

SAME Deutz-fahr HD 400 2023 Parts Catalog

If you’re ordering parts for a SAME Deutz-fahr HD 400 2023 Parts Catalog baler, you already know that guessing a part number is a fast way to get the wrong gasket and a machine down for a week. This 2023 parts catalog is the document that eliminates that guesswork. 170 pages of factory-original exploded diagrams and part numbers. No third-party interpretations. No reprints. This is the exact same PDF Deutz-Fahr dealers use when they punch in your order.

What This Parts Catalog Actually Contains

Open it and you get the same structure you’d see on the dealer counter. Page 1 lists the machine type (HD 400 high-density pick-up baler) and the serial number range it covers – from Machine No. 2023-007 onward. From there, it’s straight into the parts list: every assembly broken out with position numbers, part numbers, quantities, and the little symbols that tell you if a part was changed after a certain machine number. The symbol table on page 2 explains each one – plus sign means from machine number, minus means up to, etc. You need that when you’re cross-referencing a worn part on an older unit that got a running change.

Ordering Parts: The Rules From Page 2

Page 2 of this catalog lays out the exact information you must have to place an order: machine type and chassis number, part number and description, quantity, exact shipping address with postal code, and requested shipping method. Miss any of that and the dealer will kick the order back. The manual also warns that illustrations may not exactly match the final production part – improvements happen after the catalog goes to print. If you’re not absolutely sure of a part number, they tell you to send in the old part as a sample. That’s the kind of real-world instruction you don’t get from a generic online parts lookup.

Pay attention to the note about hydraulic cylinders and PTO shafts. The manual says for hydraulic cylinder repairs, replace only the seal kit – don’t order the whole cylinder unless it’s damaged. For PTO shaft components (profile tubes, guards, funnels), you cut them to length during installation. That’s a detail that keeps rookies from ordering wrong-length parts.

Why the SAME Deutz-fahr HD 400 2023 Parts Catalog Matters

Here’s the thing about aftermarket parts lists: they often skip the mid-production updates. Deutz-Fahr issues microfiche and new catalog editions as changes happen, and this 2023 edition incorporates all those engineering changes. The catalog itself says newer editions replace older ones, so if you’re working on a 2023 machine, you need this version. Using a 2022 catalog could give you a superseded part number that doesn’t fit. Don’t make that mistake – stick with the OEM document.

170 Pages of Exploded Views and Reference Data

The catalog runs 170 pages. That’s enough page count to cover every major assembly: the pick-up, the feeder, the plunger, the tying mechanism, the driveline, the hydraulic system, and the chassis. Each section has an exploded view with callouts, and the parts list table below gives you the exact part number, description, and quantity. You also get the little symbols – “G” for group assembly, “S” for see position, “N” for belongs to position – so you can trace how assemblies relate. This matters when you order a sub-assembly and need to know which individual parts are included.

Get the Right Part the First Time

Before you call the dealer or hit “add to cart” on an online parts portal, pull up this catalog. Locate the assembly (say, the pickup drive), find the part number (e.g., a hexagon head bolt or a bearing flange), verify the quantity, and check the machine number applicability. Then order with confidence because the data came from Deutz-Fahr themselves. The catalog even reminds you to use only original DEUTZ-FAHR spare parts – they guarantee fit and quality because they’re made using the same production methods as the factory parts. That’s not marketing fluff; it’s the difference between a part that lasts and a part that fails at the worst time.

For background on how diesel engines in these balers work, you can read this Wikipedia article on diesel engines. And if you want the deep history of diesel technology, this Wikipedia article on diesel engines covers it.

Related manuals you might need alongside this parts catalog:

• DEUTZ-FAHR M2780 Parts Catalog Index (German)
• DEUTZ-FAHR HD 490 1986 Spare Parts List
• SAME Deutz-fahr AGROTRON K 90-120 Profiline 2006 User Manual – 434 Pages

FAQ

Is this a repair manual or just a parts list?

It’s a parts catalog – no step-by-step repair instructions. Use it to identify and order the correct factory parts.

Does it include torque specs for reassembly?

No. This catalog does not list torque values. For reassembly specs you need the factory service manual for the HD 400.

Can I use this to order parts from a non-Deutz dealer?

Yes, but with a caveat. The catalog provides genuine Deutz-Fahr part numbers. If your local independent dealer can source those numbers, they can order them. However, the ordering rules on page 2 specify that orders should go through an authorized dealer. If you use an outside source, you risk getting counterfeit or mismatched parts. Stick with Deutz-Fahr dealers for warranty and fitment guarantee.

What language is the manual in?

German, English, French, and Spanish side-by-side. The spare parts list text and illustrations are in all four languages, so it works for any shop.

This 2023 factory parts catalog is the reference you need to keep your HD 400 baler running with genuine parts. Stop cross-referencing part numbers from sketchy websites. Access the Factory Manual now and keep it on your tablet or printed out in the shop – your parts manager will thank you.