Description

Palfinger PC 1500 2012 Parts Catalog

You have a Palfinger PC 1500 2012 Parts Catalog crane down and the part number on the hydraulic line doesn’t match anything in your bin. That’s when you reach for a genuine factory parts catalog, not a third-party reprint. This 96-page 2012 edition from Palfinger AG is the exact document used by dealers to source components. It’s built around the original OEM part numbering system, so you order the right seal kit the first time.

Crane Base and Piping: What the Catalog Covers

Section 0100 dives into the crane base assembly with separate subsections for standard piping, remote control piping (including OECR+WUB02), and protection hose assemblies. Each sub-section is keyed to a specific code from the crane’s identification plate. For example, the piping for a remote control setup uses different hose lengths and fittings than the standard piping. If you mix them up, you’ll get leaks or kinked lines. The catalog shows every clamp, elbow, and O-ring with its factory number.

Does This Parts Catalog Cover Your PC 1500 Configuration?

Look at the “Signs and symbols” page (page 3 in the PDF). It lists codes like ABST for support, DPS for Dual Power System, and HPLS for High Power Lifting System. Your crane’s serial number and code are stamped on the loader plate. Match those codes to the exploded drawings in sections 0200 (Control), 0300 (Safety devices), and 0400 (Crane column). The catalog uses a “valid from serial number” cutoff—this edition starts at 100000000. If your crane is older than that, you’ll want the Palfinger PC 1500 2010 Spare Parts Catalogue for the earlier run.

7 Major Sections for Proper Part Identification

The TOC splits the crane into seven physical areas plus a miscellaneous chapter. Each section contains multiple sub-pages. 0100 Crane Base, 0200 Control, 0300 Safety devices, 0400 Crane column, 0500 Main boom, 0700 Boom extensions, 0800 Extensions, 0900 Rope winch, and 1000 Miscellaneous (decals and misc hardware). That’s nine sections, but the point is it covers every bolt and bushing. For a complete job, you need all of them. The rope winch section (0900) includes trolley head UR316 and bottom sheaver UL175A – common wear items that show up with frayed cables.

Safety Devices and Overload Protection: Why You Need the Right Part Number

Section 0300 lists transport position control, electric components, signal light, emergency cut-off, overload protection (OM, OS, OSM), control ISC, and acoustic alert WBU01. Overload protection parts are specific to the crane’s configuration – you cannot swap an OM unit for an OSM unit. The catalog gives the exact part numbers for each variant. If you order a pressure switch from a generic source, you risk getting the wrong actuation point. That’s a safety violation. Stick with the OEM numbers from this catalog.

How to Order Spare Parts Correctly – Page 2 Instructions

Page 2 of the catalog (the “Preface” page) spells out exactly what you need to provide: loader type, code, serial number, spare part number, and quantity. The note says “kindly ask you to state precise details as given in the catalogue, so as to avoid confusion.” That means you need to write down the eight-digit part number from the exploded view, not the position number. For hydraulic cylinders (section 0400 lists lifting cylinders UP2307 and UP2931), you also need the cylinder serial number stamped on the barrel. Missing that information will delay the order by days.

Why OEM Documentation Beats Aftermarket Reprints

Aftermarket parts catalogs for loaders often copy the drawings but change the part numbers to their own inventory system. That creates a nightmare when you need a genuine Palfinger seal kit. This is a direct scan of the official 2012 German/Austrian factory document. Every exploded view carries the Palfinger logo and revision date (08/2012). You can verify the drawings against the actual crane on your shop floor. I’ve seen too many techs waste a morning cross-referencing numbers from third-party catalogs. Don’t do it. If you need a different model, check the Palfinger PK 7501, PK 8501 2005 Parts Catalog | OEM Manual or the Palfinger PK19000 1996 Parts Catalog – OEM Factory Manual for older units.

FAQ

Does this catalog include torque specifications for the crane base bolts?

No. This is a parts catalog, not a service manual. It does not list torque values or repair procedures. For that, you need the corresponding service manual for the PC 1500.

How do I decode the part numbers listed in the catalog?

Each part number in the catalog is an eight-digit code unique to Palfinger. The first two digits usually indicate the assembly group (e.g., 01 for crane base, 02 for control). The remaining six digits identify the specific component. To order, copy the number exactly as it appears in the drawing callout. Do not add hyphens or spaces. If you are unsure, reference the section called “Information on the ordering of spare parts” on page 2 of the PDF. The catalog also provides a “Signs and symbols” legend on page 3 that explains abbreviation codes like HYA (hydraulic extension) or KL0 (linear lever control). Cross-check those codes against your crane’s data plate before placing an order.

Every minute you spend guessing part numbers costs you billable time. Access the Factory Manual for the Palfinger PC 1500 and get the correct OEM numbers in your hands.