Description

Palfinger Epsilon AS8B, AS180 2013 Parts Catalog

Let’s cut the noise. If you’re turning bolts on an AS8B or AS180 loader crane and you don’t have the factory parts breakdown in your hand, you’re guessing. Guessing costs time and money – I’ve seen guys order the wrong support bracket three times because they used an aftermarket parts list. This Palfinger Epsilon AS8B, AS180 2013 Parts Catalog is the real deal: 250 pages, direct from Palfinger Epsilon, no third-party interpretation. Page 2 tells you exactly which serial numbers are covered (valid from 1410276). That’s the kind of spec I want on my bench before I touch a single component.

Crane Base and Mounting Bolt – Chapter 01

Section 01.010 covers the crane base itself. If your base is cracked or the mounting bolt pattern doesn’t match the truck frame, you need the part number from 01.020. The catalog lists each bolt, washer, and spacer with its factory drawing callout. I’ve seen too many guys reuse stretch bolts on these loaders – don’t. Look up the exact replacement in this catalog and avoid a failure that could drop the whole crane on your head. Safety first, always.

Support Systems for AS85/AS180 – Chapter 02

Section 02.040 is specific to the AS85/AS180 support legs. If your outrigger isn’t locking or the pin is sloppy, you need the support assembly breakdown. The catalog shows the support AX2 (02.020) and the AM variant (02.030). Each exploded view includes the part numbers for the locking pins, bushings, and hydraulic line brackets. Don’t mix up the left and right supports – the catalog callouts are unambiguous if you read them.

Boom Sections: Main, Outer, Telescope – Chapters 04, 05, 06

The main boom splits into L and Z variants (04.010, 04.020). Outer boom sections are in chapter 05. If you’re rebuilding the telescopic boom, chapter 06 gives you the rotator suspension parts (06.030, 06.040, 06.050). Each subsection lists the wear pads, cylinder mounting brackets, and extension cylinder components. You need the correct seal kit? Cross-reference the cylinder number from chapter 07.

Cylinder Assemblies: Lifting, Outer Boom, Stabilizer – Chapter 07

Chapter 07 covers all hydraulic cylinders: lifting cylinder (07.010), outer boom ram (07.020), telescopic cylinder (07.030), stabilizer ram (07.040), and stabilizer extension ram (07.050). Each cylinder has its own exploded view with seal part numbers. If you’re rebuilding a stabilizer ram, having the right backup ring is critical – one wrong part and the cylinder will drift under load. The catalog sources from the factory, not a generic seal kit supplier.

Control Valve Variants – Chapter 09

Control valves vary by crane configuration. The catalog lists standard valve (09.010), element (09.020), HKL/HKR (09.040), HLL/HLR (09.050), F130CF (09.060), PVG32 (09.070), RCE (09.080), DM9L/DM10L (09.090), LS (09.100), L90LS (09.110), and more. Each valve section includes the spool, poppet, and cartridge part numbers. If your remote control (RCE) isn’t responding, check the control valve RCE section (09.080-A) for the solenoid and wiring harness parts.

Electrical Parts and Decals – Chapters 11 & 12

Electrical schematics aren’t included (this is a parts catalog, not a wiring diagram), but all electrical components are listed with part numbers in chapter 11: basic electrical (11.010), RCE electrical (11.020), CERL/CERM modules (11.030–11.050). If you need a decal – safety, operation, load chart – chapter 12 has them organized by location. Page 3 shows the full index; cross-reference your crane’s configuration.

Who Needs This Catalog?

You do, if you own or service an AS8B or AS180 loader crane from the M-Serie. This isn’t a repair manual – it’s the parts identification bible. Shop owners, fleet mechanics, and owner-operators who need to order the correct component the first time. If you’re a DIY guy with a crane on your truck, you’ll save hours by having the factory part number instead of measuring old parts and guessing. Pair this with the PALFINGER EPSILON Spare Parts List CA 08/2013″>related spare parts list for CA models if you have a different configuration.

OEM vs. Aftermarket – Why Factory Documentation Wins

Aftermarket parts catalogs for loader cranes are unreliable. I’ve seen a third-party list call the wrong support for an AS180 – it didn’t fit, and the customer had the crane down for two weeks. This catalog is the original factory PDF from Palfinger Epsilon. The drawings match the actual parts. No reprints, no scanned copies with missing lines. If you want to avoid headaches, buy the original. Check the Automotive Industry Overview”>industry standards for parts documentation – most shops rely on OEM data for liability reasons.

Need an engine service manual for another piece of equipment? See the PSI Vortec 1.6L Industrial Engine Service Manual”>PSI Vortec 1.6L manual or the PSI 3.0L PFI Certified Engine Service Manual”>3.0L PFI manual. For background on combustion engines, the Internal Combustion Engine”>wikipedia article covers the basics, but for crane parts, stick with factory catalogs.

Does this catalog include assembly diagrams?

Yes, each section has exploded views with part numbers.

How do I know which serial number range applies?

The manual specifies valid from serial number 1410276. Check the identification plate on your crane’s column. If your serial number is older, some parts may differ. Palfinger Epsilon continuously updates designs; the publication date of each page (July 2013) indicates the revision. For older cranes, you need the earlier catalog. The preface on page 2 explains this. Always verify part numbers against your crane’s configuration.

If you manage or repair Palfinger Epsilon loader cranes, this 250-page Parts Catalog is the only reference you need to order the correct components. Stop wasting money on wrong parts and guesswork. Access the Factory Manual from AutoRepairManuals today and keep your crane running with original specs.