Description

O&K RH9.6 2004 Parts Catalog

Look, if you’re trying to keep an O&K RH9.6 running without the factory parts list, you’re burning billable hours and risking ordering the wrong component. I’ve seen guys pull a part number off a worn casting, cross it in some third-party database, and end up with a hydraulic line that’s two inches too short. That’s wasted money and downtime. This O&K RH9.6 2004 Parts Catalog is the genuine OEM document—824 pages of exploded diagrams, exact part numbers, and the official ordering procedures that O&K dealers use. No reprints, no scanned copies, no guesswork.

824 Pages of Factory Part Numbers

Every page in this catalog comes straight from O&K’s own publishing office. The document includes versions in English, French, German, Italian, Spanish, Dutch, Portuguese, and Danish. That means you can hand the page to a dealer in San Antonio or Stuttgart and they’ll read the same part reference. The catalog is organized with a **Number Index** starting on page 33, which cross-references every component by its numeric ID. If you have an old part with a stamped number, you can find it in seconds.

What Makes This Catalog Different from Aftermarket Lists?

Aftermarket parts catalogs often combine models or skip revision changes. O&K printed this first edition in April 2004 (Catalog n. 2987759.00) specifically for the RH9.6. The **Conversion Chart on page 23** gives inch-to-millimeter equivalents so you can verify dimensions against physical parts. The **Identification and Version List (pages 25-27)** tells you which serial numbers correspond to which component revisions. I’ve seen a shop order a pump seal for an early RH9.6 and get a late-model seal that didn’t fit—because they used a generic list. This catalog prevents that.

Ordering Rules: Page 4

Don’t skip the ordering rules. Page 4 explains O&K’s single-item numeration method. Each part gets a unique number, and you cannot reuse that number without written permission. If you try to call a distributor and just say “I need the boom cylinder seal,” they’ll ask for the part number. This catalog gives you the exact 6-digit code from the exploded view. The **Instructions for Ordering Spare Parts** on page 3 lay out the procedure step by step. Follow them and your order ships right the first time. Skip them and you’ll wait an extra week.

Maintenance Parts Section (Page 29-31)

These three pages list the parts you’ll replace most often: filters, seals, hoses, and wear items. Every part has an illustration reference. I keep a copy of this section laminated in my shop for quick look-ups. The **Abbreviations** list on page 22 decodes all the shorthand O&K uses in the diagrams. If you see “DIC” or “RIL” on a drawing, you’ll know exactly what it stands for. Automotive Industry Overview might tell you how heavy equipment is built, but this catalog tells you how to fix it.

Get the Right Part the First Time

When you’re dealing with a 24-ton excavator, one wrong bolt can take down the whole shift. This catalog gives you the part number, the illustration, and the version validity. Check the **Identification and Version List** to confirm your machine’s serial range. Then pull the part from the **Number Index** or the section drawings. For example, if you need a hydraulic pump seal, find the pump group in the catalog, note the item number, cross-check with page 23 for the o-ring size, and order with confidence. Automotive Industry Overview provides general knowledge; this catalog delivers specific part data.

FAQ

Can I use this catalog to order parts for a different O&K model?

No. This catalog is for the RH9.6 only. Using it for another model will give you wrong part numbers.

How do I interpret the part numbers in the exploded diagrams?

Each illustrated section lists a reference number next to the part, then a separate column gives the O&K part number. For example, on the hydraulic group you’ll see “10” pointing to the seal, and the line next to it shows the full 6-digit number. The Number Index on page 33 lists every part number alphabetically/numerically so you can find the diagram page if you only have the number. Use the Conversion Chart (page 23) to verify metric dimensions before ordering. If the part has a version suffix, check the Version List to confirm it matches your machine’s serial number range. This catalog is designed so you don’t have to guess.

Related Manuals

• O&K L45, 4500Z 1990 Parts Catalog – Parts Manual TB126
• O&K L3000 Parts Catalog – Factory OEM Manual (236 Pages)
• O&K L2500 Parts Catalog – Factory Specs for Part Ordering

Access the Factory Manual and keep your RH9.6 running with authentic O&K parts. No more cross-referencing scraped-off numbers. No waiting for dealer calls. This is the same 824-page document the factory technicians use. Add it to your cart now.