Description

Massey Ferguson 8210, 8220, 8220 XTRA Parts Catalog

If you’re tearing into a Massey Ferguson 8210, 8220, or 8220 XTRA tractor and you don’t have the factory parts catalog on the bench, you’re working blind. I’ve seen guys waste half a day chasing the wrong alternator bracket because they trusted a third-party list. This catalog – 1478 pages – gives you the exploded views and part numbers straight from the assembly line. No guesswork. No aftermarket cross-reference that might be off by a digit. Every fastener, seal, and bracket is listed with the original Massey Ferguson part number.

You need this when the hydraulic pump seal starts weeping or the fuel injection pump needs a rebuild kit. You need it when the wiring harness on the 8220 XTRA has a different bracket than the standard 8220. This catalog tells you exactly which version of the alternator, starter, or compressor goes on your tractor by serial number. The Automotive Industry Overview can tell you about assembly standards – but this catalog tells you the exact part for your specific build date.

Engine and Equipment Coverage – 8210, 8220, 8220 XTRA

The catalog opens with the Engine And Equipment section split by model. Section 010-0005 covers the M.F 8210, 010-0010 covers M.F 8220 and 8220 XTRA, and 010-0015 covers the Brake variant – the pneumatic brake system. If your tractor has air brakes, that section is where you find the compressor mounts and low-pressure fuel lines specific to that setup. The Engine itself is fully broken down: cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear, camshaft – all in separate exploded views with callouts to the part number table.

Get the Right Part Number for Alternators and Starters

Alternators and starters are where serial number splits catch most people. This catalog documents six different alternator variations – Magneti Marelli, ISKRA, and Valeo – with serial number break points. For example, ALTERNATOR – MAGNETI MARELLI is listed up to serial or engine number K 284016 (page 010-0030). After that, it switches to ALTERNATOR – ISKRA from K 284017. The same logic applies to starters: Magneti Marelli up to K302039, then ISKRA from K302040. If you order a starter without checking the serial number, you’ll get the wrong nose cone or drive engagement. This catalog kills that mistake.

Fuel Injection and Low Pressure Fuel Systems: Factory Exploded Views

Fuel Injection Equipment (Diesel) is split by model: 010-0100 for 8210, 010-0105 for 8220 and 8220 XTRA. The Low Pressure Fuel System has three variants – one for 8210, one for 8220/8220 XTRA, and a third for the 8220/8220 XTRA with pneumatic brake. Each fuel line, banjo bolt, and filter head is drawn with the factory orientation. You can see exactly which pipe goes where without having to trace lines on the tractor. The same treatment is given to the Turbocharger section (010-0170) and the Air Induction And Exhaust System (010-0180/0185).

Does This Parts Catalog Include Serial Number Breaks?

Yes. And that’s what separates an OEM catalog from a generic parts list. Heater engine block has two versions: up to engine number L155012 (010-0195) and from L155013 (010-0200). Battery & Cables has three configurations: without battery cut-off (with and without positive connection) and with battery cut-off. Even the Sanden compressor (010-0230) is isolated. If you’re working on a 8220 XTRA built after September 2000, the cooling system for air-conditioned installations changes – that’s covered in 010-0225. The catalog tracks these transitions. You don’t have to call the dealer.

More Than 40 Engine-Related Sections

From the cylinder block through the cab heating system (engine part), this catalog covers every mechanical system that bolts to or connects to the engine. The engine gaskets sets (010-0190) are listed as a complete group – you can order the full upper or lower set by part number. The Lubricating Oil Filter And Integral Cooler (010-0115) is separate from the oil sump (010-0110). Each section has a parts illustration and a table with part number, description, and quantity. If the part is used on multiple models, the table tells you which models.

For the full service and repair specs including torque values and overhaul procedures, grab the companion Massey Ferguson 8210 8220 Technical Manual – Factory OEM 1479 Pages”>Massey Ferguson 8210 8220 Technical Manual – Factory OEM 1479 Pages. If you need the step-by-step service instructions, the Massey Ferguson 8210 8220 Service Manual – 1478 Pages”>Massey Ferguson 8210 8220 Service Manual – 1478 Pages is the one to have. For smaller Massey Ferguson tractors, check the Massey-ferguson MF300 Parts Catalog – 607 Pages – Factory OEM”>Massey-ferguson MF300 Parts Catalog – 607 Pages – Factory OEM.

FAQ

Does this catalog include service procedures or torque specs?

No. This is a parts catalog – part numbers and exploded views only.

How are serial number changes handled across the 8210, 8220, and 8220 XTRA?

Every major component group lists a serial number break point in the section header – for example, alternator changes at K 284016, starter at K302039, and heater block at L155012. The catalog shows the exact part for the range before and after that number. If your tractor falls before the break, you order the earlier part. If it’s after, you order the later one. The illustrations may differ, so the table of contents guides you to the correct page. No cross-referencing needed.

Having this catalog on your tablet or printed out saves you the headache of ordering blind. You get the part number, you call your supplier, and the right seal or bracket shows up. That’s the whole point. Access the Factory Manual from AutoRepairManuals and put the correct part on your tractor the first time.