Description

Link-belt HTC-8675XP II 2009 Parts Catalog

Twenty-eight years in a six-bay shop, and I’ve seen more cranes pulled apart by guys who ordered the wrong part than by actual breakdowns. This Link-belt HTC-8675XP II 2009 Parts Catalog stops that. It’s the only genuine factory document that gives you the part numbers, not a third-party guess. You get the exact assembly breakdowns Link-belt used when they built the machine. No reprints, no photocopies—just the original PDF, 443 pages thick.

Page 1 of the catalog shows the distributor tag, engine model (CAT C13 Euro), and serial number P9J9-1037. That’s the first thing you check before ordering anything. If your crane matches those lines, you’re holding the right book. Page 2 continues the parts listing for the rubber tire lower section. From towing shackles to the swing tank assembly, every component has a unique part code and diagram.

Front Axles and Suspension: Factory Diagrams with Part Numbers

Section 01-004-126.00 covers the front axles and suspension. You get exploded views of the front suspension arm assembly (01-004-167.00), tie rod assembly (01-005-086.00), and the complete steer column (01-005-087.00). I’ve had guys try to rebuild a steering gear using a generic part number from an aftermarket site—ended up with a 4-way steering gear that didn’t even bolt up. This catalog gives you the OEM code for the 4 WAY STEERING GEAR ASSY (01-005-092.00) so you order exactly what came off the line.

Rear Axles, Wheels & Suspension: Not for Guessing

Section 01-029-215.00 is labeled REAR AXLES, WHEELS & SUSPENSION. That’s where you’ll find the rear suspension arm assembly (01-029-219.00), the brake axle assembly (01-024-321.00), and the drive train listing (01-022-300.00). Every bolt, bushing, and bracket is called out. If you’re replacing a worn suspension arm on an HTC-8675XP II, you need the exact part number from this page—not a cross-reference from a different model. I’ve seen too many shops waste a day fitting a wrong arm because they grabbed a part from a generic parts site. This catalog kills that guesswork.

Super Main Hydraulics: The Piping You Cannot See

Section 07-004-561.00 (SUPER MAIN HYDRAULICS) is where the heavy lifting happens. It details the main pump installation (01-081-116.00), the two winch plumbing (07-006-438.00), and the swing motor assembly (07-006-330.00). When a hose blows on a job site, you don’t have time to measure and hope. You flip to this section, find the diagram, and order the OEM part. The catalog also covers the outrigger valves lines control valve assembly (07-008-502.00) and the counterbalance valve (07-008-503.00). If you’re hunting for a relief valve (07-002-065.00 or 07-002-066.00), the part numbers are right there.

443 Pages of OEM Documentation: Why Third-Party Reprints Fail

Third-party parts catalogs often combine multiple models into one PDF, crop diagrams, or leave out the revision notes. This one is 443 pages of pure Link-belt content, original factory print from 2009. The table of contents alone lists over 60 major assemblies, from the engine wire harness (01-067-242.00) to the rotating joint (01-048-204.00). You get the full electrical center installation (01-069-100.00) and carrier cab assembly (01-071-409.00). Want battery specifications? Section 01-066-212.00 spells it out. Need the air dryer (01-027-324.00)? It’s in there. Nothing is missing.

If you’re maintaining a fleet of cranes, having the right parts catalog saves you money on returns and machine downtime. Check out the related manuals for your equipment lineup: Link-belt HTC-8675XP II Operators Manual – 282 Pages Factory Specs covers operation and maintenance. For other Link-belt models, see Link-belt ABS-78A, TC-78A, API-78A, TC-78B Parts Catalog – OEM 142 Pages and Link-belt RTC-80130 II 2011 Parts Catalog – 453 Pages Factory OEM. Understanding the broader Automotive Industry Overview helps frame why OEM data matters for heavy equipment. Also see Automotive Industry Overview for reference.

How to Use This Parts Catalog on a Real Job

Open the PDF, locate your machine’s serial number on page 1, then go to the relevant section. For a suspension repair, start with section 01-004-126.00 (front) or 01-029-215.00 (rear). Each sub‑assembly has a unique 5‑digit code (e.g., 01-004-167.00). Write that code down, cross‑reference with the diagram, and order from any Link‑belt dealer. The catalog includes all hardware callouts—bolts, seals, bearings—so you never assume a fastener size. I’ve watched a junior tech try to reuse a tie rod bolt because he didn’t have the right spec; this catalog would have shown him the exact part and kept the job safe.

Does this parts catalog include torque specifications?

No. This is strictly a parts catalog, not a service manual. Torque values are not listed. You need the OEM service manual for that.

Can I use this to order parts for a 2008 HTC-8675XP II?

Part numbers changed between production years. The serial number on page 1 determines compatibility. For a 2008 machine, you should verify the serial against the 2008 catalog. Using a 2009 catalog for a 2008 crane may result in wrong parts for suspension, hydraulics, or wiring assemblies. Always match the year and serial range before ordering.

Is this a PDF format?

Yes. The file is a digital PDF, 443 pages, fully bookmarked. You access it immediately after purchase. No shipping, no waiting.

Does it cover the engine and transmission?

It covers engine-related parts like the coolant heater (06-025-264.00) and wiring (06-047-203.00), and the drive train (01-022-300.00) includes the ZF 12-AS-2302 transmission. Full engine assembly diagrams are not included; this is a parts catalog for the crane chassis and upper structure, not an engine overhaul manual.

If you need the factory breakdown for your HTC-8675XP II, stop ordering blind. Access the Factory Manual and get the correct parts the first time.