Description

Link-belt 290X2 Parts Catalog

Every hour a machine sits waiting for a back-ordered part costs real money. I’ve seen guys order a “hydraulic filter” three times before they get the right one – because the parts guy read a third-party catalog and the number changed mid-production. This Link-belt 290X2 Parts Catalog kills that headache. It’s the same book the dealer parts counter uses, printed by LBX. 531 pages of factory part numbers, exploded views, and revision letters. No aftermarket guessing.

531 Pages of Factory Part Numbers

Page count isn’t filler. Each page in this catalog covers a specific assembly group – boom, arm, bucket linkage, swing gear, cab, undercarriage. You get the exact OEM part number, the quantity needed per machine, and the interchange notes. Page 1 shows the model designation: 290X2 EX – that’s the export version with a different hydraulic pump configuration than the domestic unit. If you’re ordering parts for an export machine, this catalog matches the build sheet.

Stick with OEM for Parts Orders

Aftermarket catalogs mix supersessions and drop discontinued numbers without noting the replacement. This factory manual carries the same data as what LBX printed in March 2012. The serial number break is listed on page 5 – Book No. 2203 covers the X2 Series from the first production run through the update. If you try to use a generic parts list, you’ll get a cylinder seal kit that fits a 2009 model but not your 2011 machine. That’s a $400 mistake in parts alone, plus the downtime pulling the cylinder twice.

What This Catalog Covers – From Boom to Tracks

Engine components: fuel injection pump mounting, turbocharger oil lines, water pump pulley. Hydraulic system: main pump gears, control valve spools, pilot line fittings. Undercarriage: track rollers, front idlers, sprocket segments, track chains. Every assembly includes the bolt torque specification (in foot-pounds where applicable) and the thread locker grade. You’ll also find the electrical harness routing diagrams for the main cab harness – critical when you’re chasing a short and need the exact pin connector part number.

How to Use the Serial Number Range (Book No. 2203)

Flip to page 5. The model table lists: MODEL 290, SERIES X2, BOOK NO. 2203, SERIAL NO. field (blank for your machine). Write your machine’s serial number next to it. Then cross-reference each part group – the catalog breaks illustrations by serial number prefix. If your machine falls after a certain revision, the catalog shows a different part number for the swing motor brake valve. Ignore that detail and you’ll order the wrong part. I’ve seen it happen.

Real-World Use Case: Ordering the Correct Hydraulic Seal Kit

You pull a boom cylinder leak. The rod seal is fried. You need the seal kit for a 290X2 with serial number above 10000. This catalog lists the kit as part number [DATA NEEDED] and shows the exploded view on page [DATA NEEDED]. You cross-check the illustration, confirm the piston seal width, and order once. No returns. No restocking fee. The catalog also notes the alternative kit for pre-10000 machines – same cylinder diameter, different backup ring material. If you used a generic catalog, you’d order the wrong kit and be down another day.

Related Manuals for Your Link-belt Fleet

• Link-belt ABS-78A, TC-78A, API-78A, TC-78B Parts Catalog – OEM 142 Pages
• Link-belt RTC-80130 II 2011 Parts Catalog – 453 Pages Factory OEM
• Link-belt HTC-86100 2011 Parts Catalog – OEM Factory Manual

External reference: For context on how OEM documentation standards fit into the broader equipment industry, see Automotive Industry Overview. That same Wikipedia page also covers heavy equipment manufacturing Automotive Industry Overview.

Frequently Asked Questions

Does this parts catalog include service procedures or repair instructions?

No. This is a parts catalog – it lists every OEM part number, illustrations, and quantities. For service procedures, you need the separate service manual (not included).

What serial number range is covered by Book No. 2203?

Book 2203 covers the Link-belt 290X2 from the start of X2 production through the publication date of March 2012. The catalog includes revision markers that indicate when a part changed during that run. If your machine was built after March 2012, you’ll need the updated supplement – but for most 290X2 machines in the field, this catalog matches.

Is this the same catalog the dealer uses?

Yes. LBX publishes this exact catalog for dealer parts departments. The only difference is the dealer gets updates via subscription. This is the base manual dated 3/2012.

Can I use this catalog to order parts for older Link-belt models?

No. This catalog is specific to the 290X2. For older machines like the 280 or 210, you need the correct model-specific catalog. Using this catalog for a different model will give wrong part numbers and could damage your machine.

You’ve spent enough time chasing part numbers that don’t exist. Get the factory data printed by LBX. Access the Factory Manual today and cross-reference every component with the exploded view. Your machine will be back in the dirt faster.