Description

Linde H100-600, H120-1200, H120-600, H140-1200, H160-600 Operators Manual

If you operate or maintain any of these Linde heavy forklift trucks, you need the factory Linde H100-600, H120-1200, H120-600, H140-1200, H160-600 Operators Manual. I’ve seen too many shops rely on aftermarket copies that skip the safety rules and leave out the exact control layout for single-pedal vs. twin-pedal cabs. That gets people hurt or costs you a transmission. This is the OEM document – 174 pages of the real thing, straight from Linde Heavy Truck Division.

Stop guessing which lever does what or how to check the hydraulic oil level without dropping the filter panel into the sump. This manual gives you the factory sequence for every daily check, every maintenance interval, and every control in the cab. No vague diagrams, no “refer to local dealer” nonsense. It spells out the exact steps for engine oil, coolant, fuel, tires, and the hydraulic system – all in one place.

174 Pages of Factory Operating Instructions

The table of contents runs from “Your 359 Forklift Truck” through “Technical Description” and “Safety Rules” all the way to “Inspection and Maintenance data” at 6000-hour intervals. Each section is numbered and cross-referenced for the H100-600, H120-1200, H120-600, H140-1200, H160-600 models. If you need the wiring for the composite instrument and light switches, it’s in there. If you need to know where the jacks go when changing wheels, page numbers are listed. You won’t waste time flipping through a generic forklift book.

Safety Rules and Handling Fuel

Section 2 of this operators manual covers “Safety Rules” and “Handling Fuel, Lubricants and Coolant.” Linde doesn’t mess around with these trucks – they run diesel, and the fuel system can kill you if you skip the pre-filter and water monitor checks. The manual tells you exactly how to clean the fuel filter and when to change the pre-filter (every 500 hours). I’ve seen guys blow a hydraulic line because they ignored the “Working hydraulics filter panel – removal” procedure. Read it first.

There’s a separate subsection on “Handling Fuel, Lubricants and Coolant” that lists the correct fluids and disposal requirements. You don’t get that from a third-party reprint.

Controls and Indicators: Single Pedal vs Twin Pedal Cab

These Linde trucks come in two cab configurations. The manual dedicates separate pages to “Controls and indicators – single pedal cab” and “Controls and indicators – twin pedal cab.” If your shop has both variants, you need this document to avoid mixing up the starting procedure. The single-pedal models use a different engine start sequence than the double-pedal models. The manual has both: “Starting the engine – double pedal models” and “Starting the engine – Single pedal models.” Also covers stopping procedures, driving, and the joystick controls for mast and attachment operation. If you’re training a new operator, hand them this manual.

Daily Checks: Engine Oil, Coolant, Fuel Levels

Every morning before you fire up that H160-600, you need to check the engine oil level, coolant level in the reservoir, and fuel level. The manual walks you through each step, including where to find the dipstick and how to read it on a hot engine. It also covers tire condition and pressure checks, battery access, fuse box location, and the hydraulic system oil level check. For a 6-bay shop like mine, having this on the workbench means nobody skips the prep checks. The maintenance schedule starts at 50 hours and goes up to 6000 hours – with detailed tasks like “Check the security of the axle clamp and drive motors” at 500 hours, and “Check the condition of structured components” at 2000 hours.

For additional training material, see the Linde Series 359 IC Engined Truck Training Manual.

Why Use the OEM Operators Manual Instead of Aftermarket?

Because aftermarket manuals often leave out the “Intended use” section that tells you not to lift loads on slopes or exceed the mast tilt limits. They copy the wiring diagrams wrong. Linde prints this manual themselves – it’s the same one that ships with the truck. The “Type Plates” section teaches you how to decode the truck’s serial number and model designation so you order the right parts. If you’re working on the transmission, refer to Manual Transmission basics to understand gear engagement, but for the Linde final drive oil check, use this manual. For cylinder head details on these diesel engines, check Cylinder Head Mechanics.

Who Needs This Manual?

Shop owners who want their operators to stop blowing $2,000 hydraulic pumps. Fleet managers who need a standard operating procedure across multiple sites. Home garage enthusiasts who bought a used Linde forklift for their property and need to learn the controls. The manual covers optional equipment like programmable mast positioning, climate control, and trailer coupling. If you have to tow a dead truck or hoist it onto a flatbed, the manual shows the jacking points. It even includes emergency exit procedures if the cab tilts and won’t release.

Related Manuals

• Linde H 50 T to H 80 T – 03 Forklift Operators Manual
• Linde H 50 to H 80 Diesel Forklift Operators Manual

Does this manual cover the H180-600 model?

Yes, the manual covers H180-600 as listed on the cover page.

What is the proper procedure for checking hydraulic oil on these Linde models?

The manual has a dedicated subsection “Hydraulic system: oil level check” under the daily checks area. You start by opening the working hydraulics filter panel – the manual shows the exact location and fasteners. Then you check the oil level with the truck on level ground and the mast fully lowered. If the level is low, add the specified hydraulic fluid from the “Handling Fuel, Lubricants and Coolant” section. Never mix oils. The manual also includes a separate “Hydraulic system: oil level check” under the maintenance section for every 500-hour inspection, where you also inspect the hydraulic tank breather filter. Follow the sequence exactly – skipping the filter check can introduce contaminants and ruin the pump seals.

If you want to keep your Linde forklift running and avoid expensive downtime, get the factory document. Access the Factory Manual now.