Description

Kubota RCK54-24G, G2460G Parts Catalog – 27 Pages of Factory Parts Data

If you’ve ever ordered a replacement joint for a Kubota RCK54-24G, G2460G Parts Catalog mower and got a box with the wrong spline count, you know the drill. The guy behind the counter reads a generic cross-reference, you waste a week, and the machine sits. That’s why this 27-page OEM parts book exists. It’s the same document Kubota dealers used to pull part numbers before they switched to screens. No reprints, no aftermarket tables – just factory-printed numbers, exploded views, and interchange codes that tell you exactly which yoke fits which serial number range.

I’ve been turning wrenches since before ASE was a thing. I’ve seen generic parts catalogs that looked like they were photocopied from a fax. This one isn’t. It’s a genuine Kubota publication, part of their “Instructions for Parts Books” series, and it covers both the RCK54-24G and the G2460G mower decks. The first two pages alone explain how to read the columns – REF.NO, Part No., Description, Q’ty, S.No., I/C, and Remarks – so you don’t order a part that supersedes itself mid-year. Aftermarket catalogs rarely tell you that.

Universal Joint Assembly – Finding the Right Yoke

The UNIVERSAL JOINT section (page 4 of the PDF) shows three figures: H0IO, H015, and C600. Each calls out specific parts like the ASSY JOINT UNIVERSAL (part K5460-32030) and the YOKE QUICK (76539-31150). The table on the next page gives weights in kilograms and pounds. More importantly, it lists the S.No. column – your serial number must fall within the specified range to use that yoke. Skip that check, and you’ll be pulling the deck back off. This manual forces you to verify compatibility before you spend money.

Bevel Gear Case and Input Shaft – OEM Part Numbers Only

The BEVEL GEAR CASE and INPUT SHAFT/CENTER PULLEY sections break down the driveline components. Part numbers like 03H010 and 03H015 are listed with their associated book code 100K0659. If you’ve ever compared a Chinese “equivalent” bearing to a Kubota original, you know the difference. This catalog gives you the exact Kubota part – no cross-referencing, no calling three suppliers. You order number K5371-31130 for the yoke PTO, and it fits. That’s the value of OEM documentation.

7 System Sections for the Mower Deck

The catalog divides the deck into seven subassemblies: PULLEY HOLDER/BLADE (center, left, right), TENSION PULLEY/MOWER BELT, MOWER DECK AND COVER [RCK54-24G], DISCHARGE COVER, GAUGE WHEEL, FRONT LINK LEVER [RCK54-24G], and MOWER LABEL. Each section has its own exploded diagram. The FRONT LINK LEVER section, for example, uses the same book code 100K0659 and includes parts that attach the deck to the tractor. If you’re rebuilding a G2460G deck, you need the RCK54-24G parts – this catalog confirms they share the same book, but the deck cover section is specifically labeled for the RCK54-24G. That kind of precision keeps you from ordering a cover that fits a 60-inch deck when you have a 54.

Reading the Interchange Codes – Avoid the Wrong Part

The I/C column (interchangeability) uses arrows. A double-headed arrow means the part works across older and newer serial numbers. A hash mark (#) means it’s not interchangeable. The REMARKS column will say things like “EXCEPT [FR]” – that part works everywhere except France. For Americans, that means it’s fine. This level of detail is why I tell every apprentice: never trust a third-party parts list. They strip out the codes because they think it’s clutter. Automotive Industry Overview has entire articles about the cost of wrong parts – but this manual prevents it in the first place.

Does This Catalog Include Repair Instructions?

No. This is a parts catalog, 27 pages long, not a service manual. It tells you what to buy, not how to install it. You need the separate service manual for torque specs and disassembly steps. What this PDF does give you is the official part numbers, quantities, and interchange data for every nut, bolt, grease nipple, and snap ring on the RCK54-24G and G2460G decks. If you’re restoring a vintage Kubota mower or sourcing parts for a used machine, start here.

Related Manuals You Might Need

If you’re working on a Kubota engine that powers this deck, check the Kubota V3300-T-E2B-EPS-1 Parts Catalog – 53-Page OEM Parts Breakdown for the diesel side. For transmission components on older models, see the Kubota YU4210, YW0981 Parts Catalog – 274-Page OEM Parts Breakdown. And if you need the companion service data for the RCK60-27B mower, grab the Kubota RCK60-27B Mower Parts Book Instructions.

Also, the broader Automotive Industry Overview covers parts documentation standards, but this catalog is the real deal – factory-original.

FAQ

Does this parts catalog include torque specs?

No. This is a parts-only catalog. Torque values are in the service manual.

How do I know if a part from the RCK54-24G fits my G2460G deck?

The catalog lists both models under the same book code (100K0659) and uses serial number ranges in the S.No. column. If your deck serial falls within the range shown, the part fits. Pay attention to the I/C column: a hash (#) means it will not interchange across serial breaks. For example, the ASSY JOINT UNIVERSAL (K5460-32030) has S.No. data that you must match. Never order without checking your serial number against the table on page 5. That single step saves more returns than any aftermarket lookup tool.

This manual is a PDF format, not a hard copy. Pay once, print the pages you need, and keep the file on your tablet in the shop. Access the Factory Manual now, and stop guessing which yoke goes where.