Description

Kubota BX25DLB-AU, LA240A, BT602, AU-SG 2013 Operators Manual – Factory OEM Specs

You bought a Kubota BX25DLB-AU with a LA240A loader and BT602 backhoe. That’s a serious piece of equipment. If you’re running it without the factory Operators Manual, you’re asking for trouble. I’ve seen too many guys guess on pre-op checks or ignore the safety decals because they lost the booklet. This 2013 Operators Manual, 143 pages long, is what Kubota put in the glove box from day one. It’s not a reprint or a summary. It’s the original document that tells you exactly what fluid goes where, what the “Safety Alert Symbol” means, and how to operate each attachment without bending something.

Specifications of the Tractor and Loader

Two full sections lay out the numbers you need. The tractor spec table includes travel speeds, dimensions, and fluid capacities. Loader specifications cover bucket specs, dimensional specs, and operational specs like breakout force. Backhoe specifications list B Dimensions, B Specifications, and lift capacity per SAE J31. You also get implement limitations – critical if you plan to run a mower or other attachment. These are not generic figures; they come from Kubota’s engineering department. Use them when ballasting or setting tire inflation pressures.

Pre-Operation Checks: Why They Matter

Section two of the manual devotes pages to daily checks for the tractor, loader, and backhoe. Lubrication points, transmission fluid level, rear ballast, and tire inflation are all spelled out. There’s a test operation procedure for the loader and a step to remove air from the hydraulic system. For the backhoe, you get operator’s seat adjustments, seat belt inspection, and ballast requirements. Skip these checks once and you’ll be buying a new hydraulic pump. The manual doesn’t assume you know anything – it tells you which grease fittings to hit and how often.

Operating the Engine: Cold Start and Warm-Up

Starting the engine in cold weather? The manual covers cold weather starting, the optional block heater, and warm-up procedures. It specifically warns about transmission oil behavior at low temperatures and tells you to warm the engine at idle before any PTO work. Jump starting instructions are also here with battery polarity and cable order. No guesswork – just follow the written procedure. The AU-SG model variant is included in these instructions, so you know the specs match your unit.

Loader and Backhoe Operation Procedures

Dedicated chapters walk you through filling the bucket, lifting, carrying, dumping, and using float control. There’s a section on peeling, scraping, backfilling, and handling large heavy objects. The backhoe operation covers stabilizer use, bucket control, and trenching techniques. The manual also explains the valve lock and boom lock for the loader – safety features that prevent accidental drops. These are the same procedures Kubota teaches at the factory. If you rely on aftermarket videos, you’ll miss the specific float control sequence that prevents hydraulic shock.

Source Authenticity: Why This Operator’s Manual Beats Aftermarket

Aftermarket manuals often combine multiple models into one generic booklet. They leave out the safety alert symbols, the torque values for wheel lugs, and the correct warm-up times for the AU-SG variant. This copy is the original factory PDF from Kubota Corporation – same as what the dealer hands over with a new machine. You get the official Kubota part number, the safety decal locations, and the exact specifications for the LA240A and BT602. No third-party reprints, no missing pages. If you want to keep your tractor running for 5,000 hours, you need the original document.

Frequently Asked Questions

Does this manual cover the backhoe operation?

Yes – full backhoe specifications, pre-operation checks, and operating instructions are included.

What is the travel speed table for the Kubota BX25DLB-AU?

The manual lists traveling speeds for each gear range (Hi-Lo) with and without front wheel drive engaged. You also get the speed control pedal and speed set device instructions.

How do I check the transmission fluid level?

The pre-operation check section tells you to wipe the dipstick, insert without threading, and read the level while the tractor is level and cold. It also specifies the correct fluid type (Kubota UDT or equivalent) and capacity in quarts.

Can I use this manual for the BT602 backhoe on a different tractor?

No. The controls and mounting points are specific to the BX25DLB-AU chassis. Using it on another model could damage the subframe or hydraulics.

Take the guesswork out of owning your Kubota. The factory manual is the only source that gives you the real-deal specs. Access the Factory Manual and keep it in your shop tablet or printed binder. You’ll have every pre-op checklist, fluid capacity, and safety procedure at your fingertips.

• KUBOTA BX25DLB-AU LA240A BT602 Operator’s Manual
• Kubota KX057-4, U55-4, U48-4 2010 Operators Manual – OEM Specs
• Kubota L3540 L5240 L5740 L3240 2011 Operators Manual – OEM Specs
• Manual Transmission
• Manual Transmission