Description

Kubota BX24D Parts Catalog – 281-Page OEM Parts Breakdown

If you’re rebuilding a Kubota BX24D and you’re tired of second-guessing which part number fits your serial number, this is the document that stops the guessing. I’ve seen guys pull a part off, eyeball it, order one that looks close, then spend an afternoon returning it. That’s wasted time. The BX24D Parts Catalog from Kubota gives you the factory part numbers, quantities, and interchangeability codes you need to get the right part the first time. It’s 281 pages of OEM data, not some aftermarket translation. Forget the generic online lookups – this is the same book the dealer uses.

Engine and Fuel System Coverage

Cylinder head, camshaft, crankshaft – every major rotating and stationary component is listed with a unique part number. The catalog breaks the engine into sub-sections: CRANKCASE, OIL PAN, CYLINDER HEAD, GEAR CASE, HEAD COVER, OIL FILTER, DIPSTICK AND GUIDE, OIL PUMP, MAIN BEARING CASE, CAMSHAFT AND IDLE GEAR SHAFT, PISTON AND CRANKSHAFT, FLYWHEEL. That’s just the engine bottom end. The fuel system gets its own branch: FUEL CAMSHAFT AND GOVERNOR SHAFT, IDLE APPARATUS, STOP SOLENOID, INJECTION PUMP, GOVERNOR, SPEED CONTROL PLATE, NOZZLE HOLDER AND GLOW PLUG. You want the nozzle holder component parts? They’re listed separately with an exploded view. No guesswork on which o-ring goes where.

How to Read the Parts Book Index

On page 1 you’ll find the instructions for using the book. The column definitions are spelled out: Ref.No points to the picture, Part No. is the factory number, Q’ty is how many you need, S.No. shows serial number range with ≥ and ≤ symbols, and I/C tells you interchangeability. The arrows (← old for new, → new for old) save you from buying a part that won’t fit after a design change. Page 2 gives you the ALL PRODUCT INDEX listing major systems: ENGINE, FUEL SYSTEM, COOLING WATER SYSTEM, ELECTRICAL SYSTEM, FRONT AXLE, TRANSMISSION, SPEED CHANGE, REAR AXLE, BRAKE, PUMP/MOTOR SYSTEM, STEERING, and more. Use that index to jump directly to the right section instead of flipping through 281 pages blind.

281 Pages of Factory Part Numbers

Every bolt, seal, and gear is listed individually. The transmission section alone covers CLUTCH SHAFT/OUTPUT SHAFT, PROPELLER SHAFT, HST 1 through HST 4, RANGE GEAR SHAFT, PTO SHAFT, MID PTO, REAR DIFFERENTIAL, FWD IDLE SHAFT, GP IDLE SHAFT, FRONT WHEEL PROPELLER SHAFT. Hydraulics include HYDRAULIC PUMP, HYDRAULIC PUMP [COMPONENT PARTS], CONTROL VALVE, STEERING CYLINDER [COMPONENT PARTS]. The exploded drawings let you see exactly how the parts assemble. When you order, don’t forget to check the country codes – the catalog includes codes for USA, Canada, France, etc. If the Remarks column says EXCEPT [FR], that part won’t fit a French-market machine but works here in the US.

Understand the Country Codes Before Ordering

Kubota parts catalogs include country-specific variations. The remarks column may say EXCEPT [CA] or use symbols like [FR]. If you skip that line, you might order a part that’s not meant for your region. The catalog lists the country codes on page 1: A for United States, CA for Canada, FR for France, GR for Greece, PO for Portugal, AU for Australia. If the remark says EXCEPT [FR], that part works in all countries except France – meaning it works here in the USA. Pay attention to that detail. It saves returns and downtime.

Transmission and Hydraulics: Complete Parts Breakdown

From the HST (hydrostatic transmission) sections to the rear axle and brake assemblies, this catalog covers every mechanical and hydraulic system on the BX24D. The steering section includes STEERING HANDLE, STEERING CONTROLLER, STEERING LINKAGE, and the STEERING CYLINDER [COMPONENT PARTS]. Hydraulic lines are split into delivery and steering circuits. The control valve and its component parts are listed separately. If you’re rebuilding a cylinder or replacing a hydraulic line, you get the exact part number, not a generic cross-reference. The FRONT DIFFERENTIAL, REAR DIFFERENTIAL, and axle cases are all there. This is the manual the dealer techs use when ordering parts for a tractor that came in on a flatbed.

Related Manuals

• Kubota V3300-T-E2B-EPS-1 Parts Catalog – 53-Page OEM Parts Breakdown
• Kubota YU4210, YW0981 Parts Catalog – 274-Page OEM Parts Breakdown
• Kubota RCK60-27B Parts Catalog – 27-Page OEM Breakdown

For background on why OEM catalogs matter across the wider Automotive Industry Overview, you can see how standardized part numbering keeps equipment running. Automotive Industry Overview

FAQ – Common Questions About the BX24D Parts Catalog

Does this catalog cover the D722 engine?

Yes, the BX24D uses a D722 diesel. The catalog includes all engine components from crankcase to cylinder head.

Are torque specifications included in a parts catalog?

No. A parts catalog lists part numbers and quantities, not repair procedures. You need the service manual for torque specs. That manual is available separately on this site.

How do I find the right part number for my serial number?

The catalog includes serial number ranges in the S.No. column. Look for the heading: a “≥” means your serial number must be greater than or equal, “≤” means less than or equal. Also check the I/C codes for interchangeability. If your machine is older or newer, use the arrows to see if the part supersedes. This is explained on page 1 of the catalog.

Can I use this catalog for a BX23 or BX25?

No, this is specific to the BX24D model. Using a different model’s catalog will give wrong part numbers. Get the correct one for your model.

Stop hunting for part numbers online and hoping they’re right. This is the official Kubota Parts Catalog – no reprints, no aftermarket drawings. Access the Factory Manual and get the exact OEM part numbers for your BX24D.