Description

John Deere JD410 1992 Parts Catalog – Factory Specs for Ordering Correct Parts

I’ve been turning wrenches for 28 years, ASE Master. If I had a dollar for every time a guy handed me a part that was one number off, I’d retire tomorrow. The John Deere JD410 1992 Parts Catalog stops that waste. This is the official factory document – 431 pages, printed for the US Army (TM 5-2420-222-20P), and it’s the only source that matches every bolt, seal, and hydraulic fitting to its exact OEM number. You want to order a piston for the backhoe? This catalog tells you which group it lives in, which figure to look at, and what the supersession history is. No guesswork. No “close enough.” If you’re working on a JD410 loader backhoe – and you care about the difference between a 1/4-20 and a 5/16-18 – you need this on your bench.

Understanding the Group Structure: GROUP 01 Through GROUP 99

This catalog uses the John Deere group numbering system, and it’s not random. GROUP 01 covers the engine – subgroups like 0105 (cylinder head), 0106 (valves), 0108 (crankshaft). GROUP 02 is the fuel system – 0202 is the injection pump. GROUP 03 is the electrical system – starter, alternator, wiring. I could list all 28 groups, but here’s the point: when you pull a part, you look up the group, find the figure, confirm the part number against the index. Page numbers are listed for each group (like page 5-1 for GROUP 05 – power train). The catalog even includes a LAST CHANGE section tracking which pages were revised (see the change sheet on page v-vi). If you’ve ever installed a part from a cracked reprint manual and had it not fit, you know why revision tracking matters. This catalog’s change log shows exactly which figures – Figure 8, Figure 13, Figure 20 – were updated. You’re not flying blind.

What Does a Parts Catalog Cover That a Service Manual Doesn’t?

Service manuals tell you how to take things apart and what torque to turn a bolt to. A parts catalog tells you what the hell to order before you even start. The JD410 catalog has Section I (Introduction), Section II (Maintenance Allocation Chart), and Section IV (Parts List). But the meat is in the GROUPS. For example, GROUP 07 (hydraulic system) includes subgroups 0700 (pump), 0704 (control valve), 0705 (cylinders), 0710 (hoses), 0721 (auxiliary hydraulics). Each subgroup has a corresponding figure – Figure 28 through Figure 35 – that shows the exploded view with callouts. Need a seal kit for the steering cylinder? Figure 28, item 12. The part number is right there, cross-referenced with the National Stock Number (NSN) if you’re dealing with military procurement. No reprint, no aftermarket copy – this is the actual Army technical manual from 1992, approved for public release. You can dump your aftermarket third-party PDF that has blurred numbers. Period.

3 Ways This Catalog Saves Your Job

First, it eliminates the “I think this is the right part” phone call to the dealer. You look up the figure, verify the group, and order the exact OEM number. Second, it includes the change sheet from 1993 – meaning the pages were updated with new part numbers and supersessions. If you’re working on a 1992 JD410 and someone swapped a cylinder years ago, the catalog tells you which revision applies. Third, the index at the back lets you search by part number or NSN. I’ve seen guys spend two hours on a parts website guessing. This catalog cuts that to two minutes. That’s billable time you keep. Access the factory manual and stop burning hours on aftermarket parts hunting.

Last Change and Current Pages: Why Revision Tracking Matters

Flip to the Change 1 pages (page v-vi). The Army issued this change in September 1993, removing old pages and inserting new ones – for example, pages 5-1 through Figure 8, 14-1 through Figure 16, 68-1 through Figure 69. If your manual doesn’t have those updated pages, you might order a part that’s been discontinued or superseded. This catalog contains the complete set of current pages as of that change. It’s not a haphazard scan from a copy machine. It’s the actual unit maintenance repair parts and special tools list (TM 5-2420-222-20P). Every figure number – from Figure 1 (engine group) to Figure 164 (index) – is present. Need the hose routing for your impact tool attachment? Group 74 (GROUP 7412, GROUP 7437) covers the hydraulic impact tool and earth auger attachments. You’ll find the correct part numbers for those specialty items.

Get the Right Part Number Before You Call the Dealer

Before you pick up the phone, have this catalog open. Look up the group for your component – say GROUP 06 (power train) with subgroups 0601 through 0613 covering everything from the transmission to the differential. Figure 39 through Figure 55 show the breakdowns. Write down the part number from the figure, then verify it in the index. The catalog also references this Wikipedia article on diesel engines if you need background on the engine type, but for parts identification, the catalog is self-contained. this Wikipedia article on diesel engines is useful for understanding the 4-cylinder diesel that powers the JD410, but the catalog gives you the actual part numbers. Cross-reference with related manuals: John Deere JD410 1992 Parts Catalog – Section: Change Sheet/Revision Details for the revision history, John Deere JD410 1987 Technical Manual for earlier model variations, and John Deere JD410 1992 Technical Manual for the service procedures that go with these parts. But for ordering, this catalog is the final word.

That’s the bottom line. The John Deere JD410 1992 Parts Catalog is 431 pages of factory-correct part numbers, group breakdowns, figures, and change updates. No guesswork. No wasted trips to the dealer. Access the Factory Manual and keep your JD410 running with the right parts, every time.

Does this catalog include torque specs for assembly?

No. This is a parts catalog, not a service manual. It lists part numbers, figures, and NSNs. For torque specs, use the JD410 Technical Manual.

How do I know if a part number has been superseded?

The change sheet on pages v-vi lists all revised pages and superseded parts. The catalog includes the full set of current pages as of Change 1 (September 1993). If a part was replaced, the figure callout shows the current number. Always check the index for the latest part number. The group structure also indicates whether a component belongs to an earlier or later revision. For the most current data, John Deere dealers can run the part number, but this catalog gives you the starting point.