Description

John Deere 9500, 9510, 9600, 9610, CTS 1999 Parts Catalog

If you’re wrenching on a rubber track system for a John Deere combine, you already know the pain of finding the right part number. One wrong bogey wheel hub can cost you a day and a few hundred bucks. This 41-page factory catalog for the 1999 models – 9500, 9510, 9600, 9610, and CTS – is what I pull off the shelf when a customer rolls in with a track that’s walking off the rim. It’s not a repair manual; it’s the Parts Catalog that gives you the exact John Deere part numbers, exploded views, and serial number breaks so you don’t order a left-hand idler arm when you need a right-hand one.

I’ve seen guys trust aftermarket parts lookup sites and end up with a brake drum that doesn’t match the hub spline. That’s a waste of billable hours. This catalog is the original OEM print – the same one the dealer counter uses. Page 2 lays it out: the rubber track system fits the 9500, 9600, CTS, 9510, 9610, and CTS-2 combines. It also tells you the system is not compatible with the 9500 Sidehill, which is the kind of detail that keeps you from buying a kit you can’t use.

Grid A: Undercarriage and Track Frame Assembly

Turn to Grid A and you’ll find the breakdown of the track frame – from the adjustable idler assembly (A02) through the final drive mounting (A25). Each grid number corresponds to a detailed illustration and a parts list. Need the part number for a bogey wheel axle? Grid A07. The tension cylinder attaching hardware? Grid A14. The catalog uses a box-enclosed illustration key: if a group of parts is boxed together, that whole assembly is sold as a service assembly. Page 3 explains the bolt strength identification – they flag high-strength SAE Grade 8 bolts with “HS SAE 8” so you know which fasteners can’t be swapped for a Grade 5.

Serial Number Cross-Reference: Don’t Guess the Fit

Every part listing in this catalog includes a serial number range. The manual uses examples like L 97 001 0822 to show left- and right-hand track serial numbers. If the part says “-000000” it fits all machines up to that serial number; “000000-” means from that number onward. When you see XXXXXX, a change was made but the exact serial wasn’t captured when the catalog was printed. This level of detail is why I refuse to let my guys use third-party parts books.

3 Critical Groups You Need to Check

1. BELT AND DRIVE WHEEL – Grid B01. The drive wheel and belt are the heart of the track system. Don’t mix up the belt part numbers between a 9600 and a CTS; the catalog lists them separately by model.
2. BRAKE SHOES AND DRUM – Grid B05. Brake parts are safety-critical. The catalog shows the drum and shoe assembly with the correct lining material code.
3. FINAL DRIVE MOUNTING – PLANETARY – Grid B11. If you’re in the planetary final drive, you need the exact shim and bearing part numbers. The alphabetical index at the back helps you cross-reference by name.

Why Factory Parts Numbers Beat Aftermarket Abbreviations

Aftermarket catalogs often abbreviate “ADJUSTABLE IDLER ASSEMBLY” or skip the “INDIVIDUAL REPAIR PARTS” note for the accumulator. This John Deere document spells every part out – including the one-half gallon accumulator repair parts under A in the index. For the complete powertrain, you’ll want to pair this with John Deere 9500 and SH9500 Combine Parts Catalog or the John Deere 9505 9510 9511 Parts Catalog for earlier models. If you’re working on a 9510 SH, grab the John Deere 9510 SH9510 2000 Parts Catalog too. And if you need a refresher on how diesel engines interact with the hydraulic system, read this Wikipedia article on diesel engines for background.

FAQ: Three Questions I Get Every Week

Will this catalog tell me how to install the rubber track?

It’s a parts catalog, not a service manual. You’ll get part numbers and exploded views, but no installation steps. You need the John Deere shop manual for that.

Does it cover the CTS combine or just the 9500?

It covers 9500, 9510, 9600, 9610, CTS, and CTS-2. Page 2 lists each model’s separate parts catalog reference if you need more detail for the combine itself.

Are torque specs included in a parts catalog?

This is strictly a parts book. It tells you bolt grades (SAE 5 or 8) but not torque values. For assembly torque, buy the factory service manual. Don’t guess – I’ve seen stripped steering arms from someone winging it.

How do I use the alphabetical index?

Look up the part name (e.g., “BOGEY WHEEL ASSEMBLY”) and it gives you the grid numbers. Go to that grid, find the illustration, and cross-reference the key number to the parts list. It takes two minutes once you get the hang of it.

You can chase guesses and return wrong parts, or you can work off OEM data that every John Deere dealer relies on. Access the Factory Manual now and stop throwing money at mismatched components.