Description

Honda CR-V 1999 Service Manual

I’ve lost count of how many stripped threads and blown head gaskets I’ve seen because some guy trusted a aftermarket manual that guessed at torque specs. That’s not a risk you want to take on your own CR-V. This Honda CR-V 1999 Service Manual is the exact book Honda techs used at the dealer. 1395 pages of factory data for the 1997-2000 CR-V. No guesswork, no reprints from some third party who copied it wrong.

Engine and Cooling System: Factory Procedures

Engine section covers the B20B and B20Z. Page references for valve clearance adjustment, timing belt replacement, and head bolt torque (20 lb-ft then 49 lb-ft, then 90 degrees and 90 degrees again — that sequence matters). The Cooling section gives you the correct thermostat rating, water pump replacement steps, and the exact bleed procedure for the system. If you skip the bleed step, you’ll get air pockets and an overheating engine. I’ve seen it happen.

Does It Cover the Real-Time 4WD System?

Yes. The manual includes the full section on the real-time four-wheel drive system. It explains the hydraulics, the rear differential, and the control unit. You get troubleshooting charts for the 4WD indicator light, the pressure tests, and the component removal steps. If you’re chasing a driveline issue, this is where you start. Check the Precautions for Real-time 4WD on page 1-23 before you open anything.

7 Major Systems Covered

Fuel and Emissions section gives you the vacuum routing diagrams and the EVAP system checks. Electrical includes the full wiring harness diagrams and the connector locations. Suspension section covers the MacPherson struts, control arms, and wheel alignment specs. Brakes (including ABS) has the bleeding procedure and the ABS modulator test. Body section has door adjustments, sunroof, and the SRS components. Restraints section details the airbag system with the proper disabling procedure — you do not want to skip that. Honda CR-V 1997-2000 Service Manual – Section: Restraints for deep dive.

Get the Right Torque Values

The Specifications section at the back of the manual lists every torque value in a table. You’ll find the head bolts, the intake manifold nuts, the suspension fasteners, and the wheel lug nuts. No converting from metric guessed numbers. The factory values are in lb-ft and in-lb where needed. Use a calibrated torque wrench. Don’t think you can feel it — many head bolts need angle tightening beyond specified torque. This manual shows the angle plus the final torque.

Specifications Section: Why It Matters

When you need the charge pressure for the A/C system or the fluid capacities for the transaxle, you turn to the Specifications chapter. It also lists the spark plug gap, the ignition timing, and the tire pressures. I used to have a guy in my shop who threw away aftermarket manuals because they had the wrong spark plug gap listed. This one has what Honda wrote. Honda CR-V 1997-2000 Service Manual – Section: Special Information includes the warnings about SRS components that you must read before you touch the steering wheel or seats.

Source Authenticity: OEM vs. Repackaged Copies

This is a direct scan of the 1999 Honda publication. The watermarks and page numbers match the original dealer manual. Aftermarket manuals often omit the “CAUTION” boxes about personal injury because they don’t want the liability. Honda didn’t care about liability — they wanted the tech to survive the job. You’ll find warnings about not using starter fluid near the intake, about disabling the fuel pump before working on the fuel system, and about discharging the A/C system properly. If you see a manual that doesn’t have those warnings, toss it.

Related Manuals

• Honda CR-V Service Manual
• Honda CR-V 1997-2000 Service Manual – Section: Restraints
• Honda CR-V 1997-2000 Service Manual – Section: Special Information

For broader context, check the Automotive Industry Overview for service trends, or Manual Transmission for drivetrain basics.

Is this manual for the 1999 CR-V only?

It covers 1997 through 2000 model years. The first edition was printed 11/99. If you have a 1997 or 1998, all sections apply.

Does it include wiring diagrams?

Yes. The Body Electrical section has full circuit diagrams, connector views, and ground locations.

Can I use this for the real-time 4WD?

Yes. Section on Transaxle includes the 4WD hydraulic system and the rear differential.

Is this a reprinted copy?

No. It’s a direct scan of the factory original. No reprint, no third-party edits.

You don’t need to guess on a 20-year-old CR-V. You need the factory data that gets the job done without breaking parts. Access the Factory Manual from AutoRepairManuals and get back to turning wrenches.