Description

HMF 725 Parts Catalog – The Only Factory Parts Book You Should Trust

I’ve been turning wrenches since before a lot of you were born. 28 years as an ASE Master, and I’ve seen more backyard repairs go sideways because someone grabbed an aftermarket parts list or a scanned PDF from a forum than I care to count. If you’re working on an HMF 725 – the Massey Ferguson 725 mouldboard plough – you need the real deal: the Parts Catalog that came out of the factory. This one’s 60 pages, printed from the original Massey Ferguson documentation, and it’s the only source I’ll let my junior techs touch.

60 Pages of Factory Specs – No Guessing Allowed

Every page in this Parts Catalog is straight from the Massey Ferguson line. You get exploded-view drawings for the headstock, frame, SRS, HSRT, and HSRS configurations. Part numbers like 394168M1 (link axle pin) and 394241M1 (top link pin) are listed with exact descriptions. Need the reversing cylinder group? It’s on page 11 of the PDF – the same page numbers the factory used. Cross-shafts, tension pins, grease nipples, spanners, lock nuts – it’s all there. No generic stand-ins.

Headstock, Frame, and SRS – What the Manual Covers

The catalog is organized by assembly groups. First: headstock, frame, and SRS (serial number breakpoints included – from serial no 98 26834 onward). You get item numbers, part numbers, comments for variations like [B], [M], [N]. For example, the headstock itself has two variants: part 3942430M1 for SN up to 98 267126, and 3942657M1 for SN 98 267127 and later. That kind of detail is why you don’t rely on a third-party website. The manual also includes fastener specs – bolts are listed with metric thread size (e.g., 3939017X1 Bolt Metric).

Why an Aftermarket Parts List Is a Liability

I’ve had customers bring me a plough with a mismatched axle pin because they used a parts list from a forum. The OEM HMF catalog calls for 3942683M1 axle for one configuration, 3942436M1 for another. Mix them up and the frame won’t lock. The Torque and fitment data isn’t something you can guess. This catalog also includes spanner part numbers (3940413M1, 3940283M1) – those aren’t for show. You need the right tool to adjust the turnover device. Don’t trust a reprint that might have skipped pages.

Who Needs This Catalog – and Why

If you’re a farm equipment owner or a shop tech doing hydraulic and structural repairs on a MF 725 mouldboard plough, you’re the audience. You’ve got a headstock that’s welded up or a reversing cylinder that needs a seal kit. The catalog doesn’t walk you through removal – but it does give you the part numbers to order the right bearing (3944300M1) or lock spring (3940365M1). And if you’re a beginner home mechanic, this is the safety net. You don’t want to pull the wrong bolt and have the frame drop on your foot. The catalog shows exactly which pin goes where. Pair it with an OEM service manual for torque specs.

3 Ways This Catalog Saves You from a Headache

First: serial number splits. The headstock and axles change at specific serial numbers. This catalog lists the breakpoints – you don’t have to guess. Second: fastener identification. Every bolt, washer, and lock nut has a part number and often a size reference (e.g., 399017X1 Bolt Metric). Third: cross-reference codes. The pages include letters like [A], [B], [C], [E], [G], [J], [K] – those correlate to dimensions on the reversing cylinder page. Page 11 shows the reversing cyl assembly with diameters and lengths (DIA. 28 X 825, etc.). That’s the kind of info aftermarket books just omit.

Source Authenticity – OEM vs. Aftermarket

This is a direct scan of the original Massey Ferguson Parts Catalog for the 725 mouldboard plough. The file name is MF_725_Parts_Catalog_en-38014006364.pdf. No OCR errors that swap part numbers. No reprints. You get the factory layout with the MF logo and part number tables exactly as they were printed. I’ve bought cheap copies that had blurred diagrams – not here. Every grease nipple (3942680M1) and bearing (3941686M1) is legible.

FAQ

Does this catalog include torque specs or service procedures?

No. This is a parts catalog – it lists part numbers, quantities, and cross-references. For torque values and assembly steps, you need the OEM service manual. But if you’re rebuilding the headstock or ordering a new cross-shaft, this catalog gives you the exact factory number so you don’t order the wrong part.

I have serial number 98 26900 – which headstock do I need?

Based on the catalog, headstock part 3942657M1 applies to serial number 98 267127 and later. Your serial number falls in that range.

I’ve been in the trade long enough to know that a parts book is only as good as its sourcing. This one is factory-original. You can cross-check part numbers against your existing hardware and order replacements with confidence. Access the Factory Manual from AutoRepairManuals and keep it on your bench – next to your torque wrench.

Related Manuals:

• HMF MF 500 1968 Parts Catalog – OEM Factory Parts Book
• HMF MF 33 Parts Catalog – Factory Parts Book (330 Pages)
• HMF MF3366 1974 Parts Catalog – Factory OEM for Dozer & Loader

Automotive Industry Overview