Description

Haulotte 5533A, HTA 19 P 2007 Parts Catalog

If you’re chasing a part number for a Haulotte 5533A, HTA 19 P 2007 Parts Catalog and you’re tired of cross-referencing aftermarket junk that gives you the wrong slew ring or brake cable, this is the file that stops the guessing. 74 pages of factory parts breakdowns — not a service manual, not a repair guide. It’s the exploded-view bible for ordering replacement components. I’ve seen guys burn a whole afternoon because they ordered an outrigger pad off a third-party drawing. Don’t be that guy.

This catalog comes from Haulotte Group | BilJax, Inc., copyright 2007. The table of contents splits into two main sections: Replacement Decals (page 3) and Replacement Parts (page 17). The parts section runs through every subsystem from Outrigger to Brake And Axle to Slew Ring to the whole mess of Wire Harnesses. Each subsystem has its own page range, so you jump straight to the exploded view, get the item number, and order the correct OEM part. No interpreting vague line drawings from an internet forum.

Brake And Axle: Getting the Right Part Numbers

Page 24 of this manual covers the Brake And Axle assembly. If you’re working on a 5533A or HTA 19 P and the brake cable is stretched or the axle seal is leaking, you need the factory diagram. Aftermarket catalogs love to swap part numbers between model years — this one stays 2007-specific. I’ve seen a brake caliper mislabeled on a third-party site by three digits. That’s a machine sitting for a week while you wait for the return. Use the factory page, order the right bracket and hardware the first time.

7 Systems Covered

• Outrigger assembly (page 18)
• Towing hitch and components (page 20)
• Front rest (page 22)
• Brake And Axle (page 24)
• Slew Ring (page 26)
• Limit Switch (page 28)
• Control Compartment, Pump Compartment, Battery Compartment (pages 30–34)

That’s just the first handful. The catalog also breaks down lower boom, upper boom, jib boom, platform, hydraulic pump, boom and rotation hydraulic lines, outrigger hydraulic lines, and the entire wire harness system — 13 individual harness schematics from Platform Wire Harness to Marker Light Wire Harness. If you’re rewiring a Summit Series boom, this is the map.

What This Parts Catalog Actually Covers

It covers the parts. Not the procedures. Don’t confuse a parts catalog with a service manual. If you need torque values for the slew ring bolts or adjustment specs for the limit switch, you want the Haulotte 5533A / HTA 19 P Operator’s Manual 2013″>operator’s manual. This catalog gives you exploded views, part numbers, and ordering references. For example, the Brake Cable – CE section (page 67) shows the exact cable routing and part number for CE-spec machines. That saves you a phone call to Haulotte customer service.

Wire Harnesses: Avoid Shortcuts on Electrical Parts

Starting page 55, you get 13 wire harness diagrams. The Analog Wire Harness, Pump and Cylinder Wire Harness, Outrigger Coil Wire Harness — each with its own page. I’ve had a tech try to splice a generic harness into a 5533A because he didn’t have the factory diagram. Took three days to undo. The catalog shows connector locations, wire colors, and termination points. For the 110 VAC Tower-Platform Wire Harness (page 59) you get the full schematic. That’s not in any third-party PDF.

OEM vs Aftermarket Parts Documentation

Aftermarket parts catalogs are notorious for reprinting old part numbers and hoping you don’t notice. This one is the original Haulotte Group | BilJax file from 2007. The cover states it’s a permanent part of the machine — that tells you the level of detail. Every exploded view has the Haulotte part number next to each item. The manual ends with “Ordering Replacement Parts” reference (page 69). If you’re serious about keeping a Summit Series boom lift in service, you don’t trust generic. You use the factory parts catalog.

For other Haulotte models, check the Haulotte HA16PXNT, HA46JRT, HA16NT Parts Catalog – 291 Pages”>HA16PXNT, HA46JRT, HA16NT catalog or the Haulotte H16TPX HB44J Parts Catalog – 314 Pages OEM”>H16TPX HB44J catalog. Both are OEM factory prints.

The Automotive Industry Overview is a broader read, but for Haulotte boom lifts, stick to the factory source. Automotive Industry Overview”>Automotive Industry Overview won’t get you the correct part for a 2007 HTA 19 P brake assembly.

Frequently Asked Questions

Does this manual include torque values for the brake assembly?

No. This is a parts catalog — exploded views and part numbers only. Torque specs are in the service manual.

Can I use this catalog to identify parts for a 2007 Haulotte HTA 19 P with a different serial number?

Yes — the B33-01-0098-04 revision covers the 5533A and HTA 19 P models from the 2007 Summit Series. However, if your machine has been retrofitted or updated with later hydraulic pumps or wire harnesses, cross-check the part numbers with the serial number plate. The catalog includes sections for both standard and auxiliary battery layouts and CE-spec brake cables. If you’re dealing with a machine that has aftermarket modifications, you’ll need to verify against the actual component. The exploded views are detailed enough to match most OEM configurations. For hybrids, check the DC/Gas Hybrid Wire Harness section (page 64).

Don’t waste time on parts guessing. Access the Factory Manual and get the exact part number the first time.