Description

GEHL V270, V330 2013 Parts Catalog – Factory OEM Parts Breakdown

If you’ve ever ordered a part for a V270 or V330 skid-steer loader and ended up with something that didn’t fit because the aftermarket catalog had the wrong serial number split, you know what I’m talking about. That’s wasted time and money. This 226-page factory GEHL V270, V330 2013 Parts Catalog gives you the exact OEM part numbers straight from the manufacturer. No guesswork. You get the same documentation that dealers use. Period.

This manual covers both the V270 and V330 models, including EU variants. It breaks everything down by serial number ranges, so you order the right part the first time. Sections A through D organize the loader components, hydraulics, filter listings, and electrical schematics. The inside back cover holds standard attaching hardware torque values—nonstandard torques are noted in the part listings. That’s the level of detail you need on a job.

GEHL V270, V330 2013 Parts Catalog: 226 Pages of Factory Data

Two hundred twenty-six pages of exploded-view drawings, part numbers, descriptions, and quantities. Every fastener, seal, hose, and bracket is listed. The manual uses abbreviations like HYD (hydraulic), H/F (hand/foot controls), DJS (dual joystick), and FOPS (Falling Object Protective Structure). You’ll find sections like “Self-Leveling Valve Hydraulics V270 Models: SN 021600 and Before” and “Heater-Only Completing V270 Models: SN 021950 and Before V330 Models: SN 131400 and Before”. These serial number splits are critical. If you ignore them, you’ll order the wrong part. Page 2 of the manual explains how to read the parts list and where to find the model and serial number decal—on the right chassis upright.

Ordering genuine GEHL service parts keeps the machine running right. The manual spells that out in the introduction. It also notes that replacement batteries are not supplied by GEHL—you buy those locally. That’s the kind of practical detail you won’t get from a third-party reprint.

Main Loader Component Breakdown: Chassis and ROPS/FOPS

Section A covers main loader components: chassis, grille and engine cover, ROPS/FOPS structure, restraint bar, seats (standard, suspension, three-point belt), lift arm, attachment bracket, wheel drives, engine, air cleaner and exhaust, hydrostatic system, and hydraulics chassis and lift arm. Each subassembly is illustrated with its own parts list. For example, the “194750 Axle Assembly” has its own dedicated page. If you need a part for the high-flow auxiliary hydraulics on a V270 with serial number SN 021600 and Before, you’ll find it listed under that exact split. This manual doesn’t guess—it gives you the part number tied to your machine’s specific build.

Hydraulic Components and Heater/HVAC Housings – Section B

Section B is where you’ll find hydraulic components and heater/HVAC housings. The manual doesn’t combine everything into one messy list. It separates standard hydraulics from high-flow, self-leveling valve hydraulics, and dual joystick controls. HVAC assemblies are broken down by serial number: “HVAC Completing V270 Models: SN 021346 and Before” is a separate listing from “HVAC Completing V270 Models: SN 021347 – 021950”. That’s the kind of detail that matters when you’re replacing a heater core or a hydraulic hose.

Get the Right Part Numbers from Section D Schematics

Section D contains electrical and hydraulic schematics. These aren’t generic wiring diagrams—they’re the actual factory schematics for your V270 or V330. If you’re troubleshooting an electrical issue, you need these. The schematics show connector pinouts, wire colors, and component locations. Without them, you’re tracing wires by guesswork. That’s how shorts happen. Use the schematics to isolate problems fast. For background on the diesel engine powering these loaders, see this Wikipedia article on diesel engines. this Wikipedia article on diesel engines also covers fuel system basics.

Does This Manual Include Torque Specs?

Yes, standard attaching hardware torque values are on the inside back cover. Nonstandard torque values are listed in parenthesis after the part number description in the parts list. For example, if a hydraulic fitting requires 85 lb-ft, it’ll be there. You don’t have to wonder. The manual also includes a table of abbreviations and symbols on page 2 so you can decode fastener descriptions quickly. If you’re rebuilding a hydrostatic drive or installing a new lift arm cylinder, you need those numbers.

Skip the aftermarket parts catalogs that use generic illustrations. This is the real thing.

How many pages does this manual have?

226 pages.

Does this manual cover both V270 and V330 models?

Yes, the manual covers both V270 and V330 models, including EU variants. It uses specific serial number breakpoints throughout, such as V270 Models SN 021041 and Before, V270 Models SN 021600 and Before, and V330 Models V270 Models SN 021601 and Up. This means you must know your machine’s serial number to use the manual correctly. The parts listings are organized by these splits to avoid ordering the wrong part. Also included are sections for high-flow hydraulics, self-leveling valve, dual joystick controls, and various seat and restraint options. If you have a V270 or V330, this manual is the definitive source for OEM part numbers. It also includes filter listings, kits, accessories, and schematics in sections C and D.

Are torque specifications included?

Standard torque values are on the inside back cover. Nonstandard values are noted in the parts listings.

Is this a reprint of an aftermarket manual?

This is a direct factory PDF from GEHL, not a reprint. It’s the exact same manual used by dealers. No third-party edits or missing pages.

• GEHL V270 V330 2014 Parts Catalog
• GEHL V270, V330 Operators Manual – Factory Specs for Skid-Steer Loaders
• GEHL V270 Operators Manual – Factory Specs for Skid-Steer

If you’re working on a GEHL V270 or V330 and need the right part numbers, the factory manual is the only way to go. Stop relying on aftermarket tables of contents that leave out serial number splits. Get the actual 2013 GEHL Parts Catalog from AutoRepairManuals. Access the Factory Manual and start ordering parts that fit.