Description

GEHL 3310, 3410 Operators Manual – Factory Specs for Your Skid Loader

If you have a GEHL 3310, 3410 Operators Manual on the bench, you stop guessing and start using factory data. I have torqued head bolts on enough skid loaders to know that aftermarket procedures will leave you chasing leaks or chasing your tail. This 68-page OEM manual from GEHL covers both the SL3310 gasoline and the SL3410 diesel machines side by side. No reprints, no photocopies – original factory print.

68 Pages of Factory Data

You get the full warranty text, introduction, specifications on pages 3-4, check lists starting on page 5, and safety warnings on pages 8-9. The table of contents is laid out so you find what you need in seconds. For a machine that lives on a construction site or a farm, having the original GEHL document means you aren’t guessing which bolt takes what torque. The inside back cover holds the torque specifications for standard hardware – a page you will hit every time you reassemble something.

Specifications: Gasoline vs Diesel

Pages 3-4 list the differences between the SL3310 gas engine and the SL3410 diesel. Capacity, operating weight, hydraulic system pressure – all there. If you are swapping a component or just ordering parts, these numbers are what you hand your parts guy. Don’t trust a third-party site that says “around 2,000 psi.” The manual gives you the exact number. I’ve seen guys pull a pump because a random spec was wrong. Keep the manual handy.

Get the Right Torque Specs

The inside back cover of this GEHL 3310, 3410 Operators Manual is where the torque values live. Grade 5, Grade 8, metric equivalents – all listed. If you are installing a wheel hub or a hydraulic fitting, you need those numbers. A torque wrench is not optional. I see stripped bolt holes all the time because someone thought “tight enough” was close enough. It’s not. Use the factory spec. Your loader will thank you.

What Systems Does This Operators Manual Cover?

Controls and safety equipment occupy pages 10-14 – seat bar, pilot controls, emergency exit. Operation pages 15-21 walk you through starting, driving, and lifting. Adjustment pages 22-26 cover drive belt tension, control linkage, and parking brake. Lubrication pages 27-29 give grease points and intervals. Set-up and assembly pages 30-35 are for uncrating and initial prep. Optional features and accessories pages 36-39, decal locations pages 39-41. Troubleshooting pages 42-47 – if your machine won’t start or hydraulics are weak, start there. Service pages 48-62 include everything from engine oil change to chain case service. Index pages 61-62 help you jump to the right section fast.

Troubleshooting – Diagnosis Without Guessing

Pages 42-47 list symptoms, causes, and fixes. No fluff, just a table with what to check. For example, if the drive belts are slipping, you go to adjustment page 24. If the engine won’t crank, you check safety interlocks. This manual does not assume you have a laptop. It assumes you have a multimeter and a wrench. That is the right approach. If you need more detailed parts breakdowns, look at the GEHL 3310 3410 Parts Catalog for exploded views and part numbers.

For some transmission-related adjustments, you can cross-reference with general principles from a Manual Transmission article to understand gear oil specs, but this manual gives you the exact GEHL-recommended lubricant. Don’t guess. Use the manual.

Related Manuals for Your GEHL Fleet

• GEHL RS10-44 2009 Operators Manual – Factory Specs & Procedures
• GEHL RS10-44, RS10-55, RS12-42 2011 Operators Manual – Factory Specs

If you also work on other equipment, understanding how a Manual Transmission functions can help when troubleshooting gearbox issues, though this manual has its own dedicated service section.

FAQ

Does this manual cover the diesel engine specific to the 3410?

Yes, it covers both the SL3310 gasoline and SL3410 diesel models.

What torque specs are listed in the manual?

The inside back cover contains a full table of torque specifications for standard hardware including Grade 5 and Grade 8 bolts, plus metric equivalents. That table covers the typical fasteners you encounter on skid loaders – wheel lug nuts, hydraulic fittings, engine mounting bolts, and control linkage screws. Torque values are given in ft-lbs and Nm. The manual also references specific torque values within the adjustment and service chapters for critical components like drive chains and cylinder mounting bolts. Always cross-reference the fastener grade before applying torque; using a lower value for a Grade 8 bolt leaves a joint loose, and over-torquing a Grade 5 bolt risks snapping it. This manual gives you the data to do it correctly the first time.

If you need a reliable, original OEM document that tells you how to safely operate, adjust, and service your GEHL 3310 or 3410, get the manual that belongs in your toolbox. Access the factory manual now.