Description

GEHL 223 2009 Parts Catalog – Factory OEM Documentation

2009 GEHL 223 Parts Catalog—184 pages of factory exploded views—gives you the exact part number, not a guess. I’ve been wrenching 28 years, and I won’t touch a machine without the OEM documentation. Here’s why this catalog earns a spot on your bench.

Engine Section: Pages 10–44

You get the full breakdown of the diesel engine: cylinder head and valve cover (page 14), cylinder block (page 16), crankshaft and piston (page 24), lubrication (page 26), cooling system (page 28), fuel injection pump (page 32), and the air intake system (page 33). Each exploded view lists every nut, bolt, and seal with Gehl part numbers. For background on diesel fundamentals, see this Wikipedia article on diesel engines and this Wikipedia article on diesel engines.

Hydraulic System: Pumps, Valves, Cylinders

Hydraulic pump starts on page 46, control valve on page 60, joystick on page 63, and the boom cylinder on page 76. Every cylinder—dipper arm, bucket, boom offset, dozer blade—has its own page with part numbers and seal kit references. If a seal kit is pictured, it’s marked on the illustration. Don’t guess which o-ring goes where; the catalog shows it.

Decal Locations and Tool Kits (Pages 4–8)

Page 4 lists all decal locations—safety warnings, operating labels. Page 8 covers required tools and service kits. If you’re replacing a decal, you need the correct part number. This catalog has it.

Serial Number Breaks: Why They Matter

On page 1, the serial number range is defined for Tier I (AD00454 to AD04180) and Tier II (AE00001 and up) engines. The introduction on page 2 explains how serial number breaks work, including exceptions and inclusions. For example, (SN 999 and before) means up to and including 999. Using the wrong serial range orders a part that won’t fit. I’ve seen guys bolt on a cylinder that’s half an inch off because they skipped this step. Match your machine’s serial number to the correct part number in the exploded views.

Skip the serial number check? You’ll order the wrong part.

GEHL 223 2009 Parts Catalog – Torque Specs and Fastener Grades

Standard attaching hardware torque values are near the back of the catalog. Metric torque values in the illustrations are in Nm; multiply by 0.738 to get ft-lbs. All cap screws are Grade 8.8 unless specified. Page 2 gives the abbreviation list (CS, FHCS, HB, etc). This isn’t a service manual with step-by-step repair instructions—it’s a parts catalog. You use it to order the right bolt, not to learn how to torque it. But having the factory torque specs in the same binder saves a trip to another book.

Who Needs This Parts Catalog

If you own a GEHL 223 compact excavator, small shop or fleet, this catalog saves the parts counter run. DIY owners who want to order seals ahead of a teardown—get this. Pair it with the operator’s manual for procedures. Related manuals like GEHL 193 223 Compact Excavators Parts Catalog, GEHL 193, 223 Parts Catalog – OEM Compact Excavator Manual, and GEHL 153, 193, 223 2009 Operators Manual – Factory Specs cover additional models and operating specs.

Does this parts catalog include torque specs?

Yes, torque values are listed in Nm and ft-lbs on page 2 and near the back.

How do I find the correct part using the serial number?

On page 1, the serial number range is defined for Tier I and Tier II engines. The introduction on page 2 explains how serial number breaks work, including exceptions and inclusions. For example, (SN 999 and before) means up to and including 999. You must match your machine’s serial number to the correct part number listed in the exploded views. Using the wrong serial number range can order you a part that doesn’t fit – I’ve seen it happen. Don’t skip that step.

Access the Factory Manual—stop wasting time on aftermarket PDFs that renumber parts. This 184-page OEM catalog gets you the right part the first time.