GEHL 1410 Parts Catalog – 72 Pages OEM Factory Specs

Description

You ever order a part blind, cross your fingers it matches the one that let go at 2,000 RPM? I’ve seen guys slap a generic seal in a hydraulic Cylinder because they didn’t have the OEM number. Then they’re back in the shop a week later explaining why the customer’s spreader is puking oil. The GEHL 1410 Parts Catalog stops that. It’s 72 pages of factory drawings, part numbers, and torque specs – not some aftermarket rewrite.

Decal Locations and Model Identification

On the left side of the main frame at the front left corner of the box you’ll find a decal with the model and serial number. Page 2 calls it out. Write that number down before you order anything – without it you’re guessing. The catalog tells you exactly which parts fit your specific unit. No guesswork on that front.

Hydraulic Cylinder & Valve: Complete Breakdown

Two sections you’ll wear out first: the Apron Control Hydraulic Cylinder (pages 16-17) and the Flow Control Valve (pages 28-29 and 34-35). Each exploded view shows every seal, port, and fitting. If you’ve got a leaky cylinder or a sticking valve, this catalog gives you the OEM part numbers to order the exact replacement, not a generic cross. The Endgate Hydraulic Cylinder (pages 52-53) is covered too. Same level of detail.

72 Pages of Exploded Views and Torque Specs

Page 68 lists hydraulic fitting torque data in foot-pounds. That alone will save you from stripping a JIC fitting at 3 PM on a Friday. The inside back cover has standard hardware torque specs for Grade 5 capscrews and Grade B hex nuts. Every exploded view also includes hexagon symbols with torque values right on the part – no guessing what that bolt should be torqued to. That’s factory spec data, not a third-party approximation.

Does This Parts Catalog Cover the PTO and Drive Systems?

Yes. PTO assembly on pages 4-5. Apron & Beater Drive (mechanical) on pages 20-23. Beater Drive Gearbox (pages 24-25), Apron Drive Gearbox (mechanical) on pages 26-27. If you have the hydraulic drive version, the Hydraulic Apron Drive – Rear Drive is on pages 30-31 and the Flow Control Valve on pages 34-35. Everything from hitch frame to beater is drawn out with callouts. If you need a part for the driveline, it’s in here.

Why You Need Genuine GEHL Parts – Not Aftermarket

Page 2 states: “For your safety and continued proper operation, use only genuine GEHL service parts.” Aftermarket parts catalogs often skip the torque callouts or use generic images. This catalog has the exact part numbers, not “equivalent”. Even the tire note on page 2 tells you that replacement tires must be purchased locally – the catalog gives you the wheel set part number and tire size information. That’s the level of detail you get from an OEM print. If you want to understand more about how the tractor engine that drives this PTO works, check this Wikipedia article on diesel engines for background. For deeper engine knowledge, this Wikipedia article on diesel engines is a solid resource.

Torque matters. One stripped bolt in the beater drive and you’re looking at a weekend of rethreading. The catalog’s torque data – both in the fitting section and embedded in drawings – keeps you out of that mess.

Related Manuals

• GEHL SL4640, SL4840, SL5640, SL6640 2005 Parts Catalog
• GEHL SL7610, SL7710, SL7810 2005 Parts Catalog – OEM Factory Specs
• GEHL RS6-34 2013 Parts Catalog – Factory OEM Manual

Can I use this manual to repair the spreader?

No. This is a parts catalog for ordering components, not a service manual.

What torque values are included?

Page 68 has hydraulic fitting torque data in foot-pounds. The inside back cover lists standard hardware torque specs for Grade 5 capscrews and Grade B nuts. Also, each exploded view uses a hexagon symbol around a number that indicates the torque value for that specific fastener. That means you don’t have to guess – the torque is printed right next to the part. If you don’t see a hexagon, use the standard specs. The abbreviations list on page 2 clarifies fastener grades, so you know exactly what you’re torquing.

Stop wasting time cross-referencing junk part numbers. Access the Factory Manual and get the exact GEHL part numbers, torque specs, and exploded views you need to keep that spreader running.