Description

Doosan DX190W Parts Catalog

You need a part for a DX190W. You look up an aftermarket number, order it, wait a week, and it doesn’t fit. Or you waste an hour cross-referencing because some online list is missing the supercession. That stops with the Doosan DX190W Parts Catalog – the factory document that tells you exactly what goes where, what replaces what, and how to order it. 870 pages of OEM breakdowns, not a reprint job from a third party. This is the same binder the dealer parts counter uses.

Filter Intervals and Part Numbers

Page 3 of the manual lays out every filter, its factory number, and the service interval in hours. Engine oil filter 65.05510-5032A every 500 hours. Fuel filter 65.12503-5026 every 500 hours. Outer air cleaner element 474-00040 every 2000 hours. Suction filter for the oil tank 2474-9016A every 2000 hours. Breaker filter (optional) 474-00046 every 250 hours. If you’re a fleet mechanic or an owner doing your own PM, you write these intervals on the windshield with a grease pencil. No guessing. No cross-referencing knockoff lists. The catalog also lists teeth, adapters, side cutters – part numbers like K1000344 for teeth, 2713-1228A for right-hand side cutter. You look it up, order it, bolt it on.

870 Pages of OEM Part Breakdowns

It runs 870 pages. That covers the entire wheel excavator – engine gasket kits, seal kits for boom/arm/bucket, swing motor K9001903, control valve 2426-1198KT, bulbs, battery (506-00006), and every fuse and relay. Top overhaul gasket kit 65.99605-8042, all overhaul kit 65.99601-8071. Each illustration has a key number, part number, description, quantity, and service code. When you need a seal kit for the center joint – K9004009 – you see it under the assembly, not buried in a generic list. The catalog uses dot indentation to show sub-assemblies. Two dots means the part inside a sub-assembly. That structure saves you from ordering the wrong component because you read the line wrong.

How to Order Parts the Right Way

The foreword tells you exactly what to give the dealer: model (DX190W), machine serial number from the nameplate on the bed frame (format HEEB-OOOO or similar), engine serial number from the cylinder block (DL06-xxxxxx), part number, description, and quantity. Example: K1012726B for the main pump. If you skip any of that, the dealer punches it into the system half-blind and you get the wrong pump or a shipping delay. This manual puts the complete ordering spec in your hands. No holding on the phone while the counter guy asks “Is that the one with the two-port flange?”

Does This Parts Catalog Cover Electrical Components?

Yes. Battery relay 2544-9024, fusible link 27A 2527-1023A, and every fuse from 10A to 30A are listed with Doosan factory numbers. That keeps you from buying a generic fuse that melts at the wrong rating. The bulb list includes panel gauge bulbs 515-00012A and headlamp bulbs 515-00006. If you’ve ever had a turn signal bulb fail and the aftermarket replacement flickers because the wattage is off, you know why OEM numbers matter. This catalog gives you the exact bulb part to order. Period.

Source Authenticity: OEM Print vs. Compilation Manuals

This is a direct scan of the Doosan factory parts list – reference K1024511AEF. OEM content, not an aftermarket compilation that guesses on supersessions. Third-party manuals often miss the service code column that tells you if a part requires modification before installation (code B) or is not sold separately (code D). Code D parts force you to buy the whole assembly. If you don’t see that code, you might try to order a component that Doosan won’t sell alone, wasting a week. The OEM print has those codes. Don’t trust a generic PDF that stripped them out.

Frequently Asked Questions

Does this catalog include wiring diagrams or hydraulic schematics?

No. It is a parts catalog, not a service manual. It gives you exploded views, part numbers, and ordering info. For repair procedures get the DOOSAN DX190W 2007 Workshop Manual.

I need the part number for the main pump. Where do I find it in this catalog?

Look under the hydraulic section. The foreword example lists K1012726B as the main pump. Use the key number on the illustration to confirm you are ordering the right pump for your serial number range. The catalog uses machine serial numbers, not just model year, so you match the exact build. If your pump has a different port configuration, the illustration will show it. Page 870 is the last page; the pump breakdown is around the middle – use the key number index to find it. After you get the pump, you might also need the Doosan DX Excavator AV8O Main Pump Technical Manual 2007 for installation specs. Larger fleets often also stock the Doosan S340LC-V Parts Catalog | 612-Page OEM Parts Manual for their other excavators.

If you are working on a DX190W and need to pull the right part the first time, this catalog is your reference. Stop burning time on aftermarket cross-reference sites that don’t have the service codes or the supercession history. Doosan builds these machines with specific engineering standards – the parts catalog reflects that. The automotive industry as a whole has moved toward digital OE documentation, and this is the real thing. Access the Factory Manual now and put 870 pages of OEM part numbers on your bench.