Description

Daewoo Solar 130W-V 1999 Workshop Manual

I’ve got 728 pages of factory print here for the Daewoo Solar 130W-V 1999 Workshop Manual, a wheel excavator that’ll punish you if you guess at the numbers. This is the OEM shop manual, Pub.No. 2023-7133E, covering serial number 0001 and up. If you’re a shop owner or a field mechanic who’s tired of chasing specs from third-party garbage, this is what you need on the bench.

If you’ve ever wasted a Saturday because a reprinted manual had the wrong stroke length on a hydraulic cylinder, you know why this matters. The original Daewoo documentation – not a scan, not a transcription – sits here with every section intact. You get the exact same content the dealer techs used back in 1999.

Safety First: 12 Specific Warning Labels and Their Locations

The safety chapter runs deep. It’s not a generic list – it’s machine-specific. Page 1 of the manual identifies the unit, but the real meat is in the Location of Safety Labels section: 12 separate warnings, each with a part number like 2190-3312 for operation and inspection maintenance, 2190-2532 for high voltage, 2190-3388 for opening the front window. If you’re swapping a hydraulic line and miss the accumulator warning (2190-2528), you’re asking for a face full of pressurized oil. The manual tells you exactly where each label goes on the machine and what it means. No guessing.

Most aftermarket books condense this to two paragraphs. Daewoo gave it twelve pages.

Specifications for Solar 130W-V – Dimensions, Cylinders, Engine Data

Under the Specifications chapter you’ll find the general description, component locations, and every dimension of the Solar 130W-V. Working range, front linkage pin sizes, hydraulic cylinder stroke – it’s all there. Need the charge pressure for the accumulator? That’s in the hydraulics section, but the spec table gives you the base numbers first. Cross-check everything against the engine specs. The Internal Combustion Engine section in this manual covers the power unit with factory tolerances, not aftermarket approximations.

General Maintenance Procedures – Torque Values You Can Trust

General Maintenance Procedures and Standard Torques are two separate bookmark sections in this manual. Don’t treat them like the same thing. The Standard Torques table gives you fastener torque values for common bolt grades, but the machine-specific torque values for the swing bearing and axle mounts are called out in the individual chapters. You want the rear axle torque? That’s under Lower Structure and Chassis. The front axle specs are in Engine and Drive Train. This is how you avoid snapping bolts or leaving them loose enough to vibrate out.

One more thing: the manual also covers the Manual Transmission if your Solar 130W-V is equipped. The rear axle with transmission assembly gets its own dedicated subsection. Factory shift points, lube specs, everything.

Hydraulic System Troubleshooting – Factory Procedure for Pressure Checks

The Hydraulic System Troubleshooting chapter is not a generic flowchart. It starts with symptoms – like slow boom raise or erratic swing – and walks you through the test points. You’ll need a pressure gauge and the correct adapters, but the procedure tells you exactly where to tap in and what readings to expect. Never rely on a third-party manual for hydraulic diagnostics; they skip the step where you verify the pilot pressure before condemning the main pump. This OEM book doesn’t skip anything.

Lower Structure and Chassis – Ram Lock Valve Operation

Ram lock valves are a safety-critical component. If the valve sticks, the hydraulic cylinder can drift and drop the boom. The Ram Lock Valve Operation section under Lower Structure and Chassis gives you the disassembly and testing procedure. Pull that section before you even touch the wrench. Page 5 of the manual (the Table of Contents) shows you exactly where to find it – I’m not giving you the page number here because you need to learn to navigate the book yourself, but it’s easy to spot.

Related Manuals

• Daewoo SOLAR 010 1997 Workshop Manual – OEM Bus Repair Specs
• Daewoo Solar 210W-V Workshop Manual – OEM Factory Shop Manual for Heavy-Duty Bus
• Daewoo DH50 1999 Workshop Manual – Factory Bus Repair Specs

Does this manual include electrical wiring diagrams?

Not as a separate chapter. The Upper Structure section covers the cab and electrical components, but there is no dedicated wiring diagram foldout. If you need detailed wire routing, you’ll need the separate electrical supplement.

What if my Solar 130W-V was built after serial number 0001?

It covers 0001 and up. Daewoo’s updates are noted in service bulletins, not in this book. You’re covered.

Can I use this manual for a Solar 210W-V?

No. Different machine. The 210W-V has a different hydraulic system and cab layout. Get the correct manual for that model – we list it under related manuals above.

Is this the same manual the dealer uses?

Yes. Same Pub.No. 2023-7133E. Dealer techs had this exact book in 1999. No reprints, no changes. What you see is what they used.

Stop chasing bad torque specs and third-party guesses. Get the real thing for your Daewoo Solar 130W-V. Access the Factory Manual directly from AutoRepairManuals – 728 pages of OEM data, not a photocopy.